This content has been marked as final. Show 5 replies
did you review the [*documentation for the StorEdge T3+*|http://sunsolve.sun.com/handbook_pub/Systems/T3plus/T3plus.html] ?
Yes, i did read the manual
I know it says it must be connected by fibre to the data host, i was asking if there was any posibility it could be done by Ethernet and also why some of my commands were not working
1) T3+ can ONLY be connected using fibre, the ethernet are only for "console"
2) The T3+ is ok with all the hba I had tried so far, just check that the card you buy is compatibile with your OS of choise
3) The T3 part is done - from you post - so now we are on the OS side
4) format is for solaris
bye bye and have fun
Thats what i thought, but you know what they say: If you don't know, ask!
Thanks heaps Frank_Contrepois
I ended up getting a Sun card off ebay that said it was compatible, hopefully it will arrive this week and we will see how i go then.
I thought the T3+ would have a stripped down version of things, but i couldnt quite figure out why things werent working, now i know lol