The system apparently has some file systems which need to be checked for errors.
By installing a new OS you should be able to ignore these.

Have you tried booting up the system with the Solaris 10 CD in the drive already?

I tryed to boot from cdroom, but i cant:

-- boot cdrom
Resetti
LOM event: +1d+1h25m53s host reset
ng ...


Sun Fire V120 (UltraSPARC-IIe 648MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #57157027.
Ethernet address 0:3:ba:68:25:a3, Host ID: 836825a3.



Executing last command: boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@d/cdrom@0,0:f File and args:
Bad magic number in disk label
Can't open disk label package
Evaluating: boot cdrom

Can't open boot device

Boot device: disk:d File and args:
SunOS Release 5.8 Version Generic_108528-18 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: eri0.
configuring IPv6 interfaces: eri0.
Hostname: sunfire
The / file system (/dev/rdsk/c1t0d0s3) is being checked.
/dev/rdsk/c1t0d0s3: UNREF DIR I=1915038 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=1915038 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=1898042 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=1898042 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=1886830 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=1886830 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=1250409 OWNER=oracle MODE=40755
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:58 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=1250409 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=1244731 OWNER=oracle MODE=40755
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:58 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=1244731 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=1210963 OWNER=oracle MODE=40755
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:58 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=1210963 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=1194046 OWNER=oracle MODE=40755
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:58 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=1194046 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=918129 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=918129 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=912444 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=912444 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=445086 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=445086 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=129631 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=129631 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=118335 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=118335 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=112689 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=112689 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=107145 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=107145 CONNECTED. PARENT WAS I=3
/dev/rdsk/c1t0d0s3: UNREF DIR I=95825 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: UNREF DIR I=95825 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: DIR I=95825 CONNECTED. PARENT WAS I=90182
/dev/rdsk/c1t0d0s3: UNREF DIR I=90182 OWNER=oracle MODE=40775
/dev/rdsk/c1t0d0s3: SIZE=512 MTIME=Dec 9 17:38 2005 (RECONNECTED)
/dev/rdsk/c1t0d0s3: DIR I=90182 CONNECTED. PARENT WAS I=912444
/dev/rdsk/c1t0d0s3: LINK COUNT lost+found I=3 OWNER=root MODE=40700
/dev/rdsk/c1t0d0s3: SIZE=8192 MTIME=Jul 27 17:12 2005 COUNT 18 SHOULD BE 32
/dev/rdsk/c1t0d0s3: LINK COUNT INCREASING
/dev/rdsk/c1t0d0s3: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.



Also, I cant do the fsck command:

ok fsck
fsck ?
ok fsck -F ufs -y /dev/rdsk/c1t0d0s0
fsck ?
ok

"ok" you see is not the os. you are in the openboot environment, not solaris. after you get the run fsck manually, it should ask you for the root password to get into the console. you should be in single user mode then the fsck should work.

thank you sid!
i can do the fsck now and enter in the system!!!

do you know if this version : SunOS Release 5.8 Version Generic_108528-18 64-bit and with sunfire v120 i can upgrade to Solaris 10 ??
Because i did the download from sun website but i cant...

and the command boot cdrom -sw dont work for me...
<boot command not found>

any suggestion ?

if you need to, backup your data on the machine. the boot cdrom command should be run from the "ok" prompt.

thank u. i will try it.

i have another question.... how can i do to access my sunfire by telnet ?? because for now i am connecting the server to a notebook...
do i need a fixed ip ?

i am installing...and in the 5 CD i get this message:

sendmail[20525]: unable to qualify my own domain name
sleeping for retry

unable to qualify my own domain name (localhost) -- using short name

and then stop everthing...
i cant boot, i cant do anything...

any help, please??????

The most common reason you will get this message is if you have a "simple" hostname for your system, and not a fully-qualified domain name.

For example, if in the hosts table you have the system listed as "myhost" and not "myhost.example.com".

Be careful of this when you give the configuration information when installing.

ok... when in the installation was asked to a hostame i just put sunfire...
what can i do now? i cant enter in the system to change this!!!

i am connecting to a notebook...i press many keys and nothing works... (esc, ctrl pause-break, etc)...

ok... i power off and power down and know i can enter in the system! =)
i search google how to stop that error...

but now i have another question...

i need to configure a interface to use telnet!!!

but i have just one:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index

1
inet 127.0.0.1 netmask ff000000
#


and before the installation i had:


# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 172.27.109.153 netmask ffffff00 broadcast 172.27.109.255
ether 0:3:ba:68:25:a3
lo0: flags=2000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6> mtu 8252 index 1
inet6 ::1/128
eri0: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
ether 0:3:ba:68:25:a3
inet6 fe80::203:baff:fe68:25a3/10


any help ????

in the installation i choose: nonetworked...if for that?

thank u!!!!!!!

If you configured your system as non-networked, it won't configure any network ports. :)

The 'lo0' interface is the "loopback" interface and only allows the system to connect to itself.

If you want to be able to telnet into your system, you should install it as networked.
I also noticed that you seem to have IPv6 support installed. You probably should not unless you know you need IPv6.

Setting up networking involves dealing with multiple configuration files.

The easiest way to do it is to run sys-unconfig and do a complete reconfigure of your system.

The interfaces are not listed using "ifconfig -a" if they are not configured.
The easiest way to assign an ip-address to interface eri0 is to enter the following commands when logged in as root:

ifconfig eri0 plumb
ifconfig eri0 <ip-address> netmask <netmask> up

example:
# ifconfig eri0 plumb
# ifconfig eri0 192.168.1.1 netmask 255.255.255.0 up

Now you should see interface eri0 listed with the corresponding ip-address when you enter the "ifconfig -a" command.

This method is not resident across reboots.
If you want this to be permanent then create the following file /etc/hostname.eri0 and enter the ip-address/interface-name in the hosts file:

# echo "test-interface" > /etc/hostname.eri0
# echo "192.168.1.1 test-interface" >> /etc/hosts

Cheers,
Solstice

Thank you, Solstice.... now i can enter by telnet!!!!!!! =))

But if i try use put and enter by ssh... i cant.... the say:

Access denied
Using keyboard-interactive authentication.

Do you know why? i have to configure more things?

i am sorry, putty not put.... =/