Hardware

Hello experts,

I'm trying to connect a Sunfire 280R to an eva8000, I've installed the fibra cards and I've done a probe-scsi-all and I can see all the cards
a san :-

ok probe-scsi-all
/pci@8,600000/SUNW,qlc@4
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 21000004cf780993 SEAGATE ST336605FSUN36G 0438
1 1 0 21000011c62d4362 SEAGATE ST336607FSUN36G 0307

/pci@8,700000/SUNW,qlc@3
************************* Fabric Attached Devices ************************
Adapter portId - 330500
Device PortId 330100 DeviceId 0 WWPN 50001fe150061f0d
Lun 0 HP HSV210 5030

Lun 1 DISK HP HSV210 5030


Device PortId 330101 DeviceId 1 WWPN 50001fe150061f0f
Lun 0 HP HSV210 5030

Lun 1 DISK HP HSV210 5030


Device PortId 330102 DeviceId 2 WWPN 50001fe150061f09
Lun 0 HP HSV210 5030

Lun 1 DISK HP HSV210 5030


Device PortId 330103 DeviceId 3 WWPN 50001fe150061f0b
Lun 0 HP HSV210 5030

Lun 1 DISK HP HSV210 5030



/pci@8,700000/scsi@6,1

/pci@8,700000/scsi@6
Target 6
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009

I then downloaded the Sun StorEdge SAN Foundation Software I tried to install it but it just stops with status code 8. See output :-

./install_it
Logfile /var/tmp/install_it_Sun_StorEdge_SAN.log : restarted on Monday February 19 14:33:39 GMT 2007


This routine installs the packages and patches that
make up Sun StorEdge SAN.

Would you like to continue with the installation?
[y,n,?] y


Verifying system...


Checking for incompatiable SAN patches
xargs: Child killed with signal 13


Begin installation of SAN software

Installing StorEdge SAN packages -

Package SUNWsan : Installed Previously.
Package SUNWcfpl : Installed Previously.
Package SUNWcfplx : Installed Previously.
Package SUNWcfclr : Installed Previously.
Package SUNWcfcl : Installed Previously.
Package SUNWcfclx : Installed Previously.
Package SUNWfchbr : Installed Previously.
Package SUNWfchba : Installed Previously.
Package SUNWfchbx : Installed Previously.
Package SUNWfcsm : Installed Previously.
Package SUNWfcsmx : Installed Previously.
Package SUNWmdiu : Installed Previously.
Package SUNWjfca : Installed Previously.
Package SUNWjfcax : Installed Previously.
Package SUNWjfcau : Installed Previously.
Package SUNWjfcaux : Installed Previously.
Package SUNWemlxs : Installed Previously.
Package SUNWemlxsx : Installed Previously.
Package SUNWemlxu : Installed Previously.
Package SUNWemlxux : Installed Previously.

StorEdge SAN packages installation completed.

Begin patch installation
Patch 111847-08 : install_it: Patchadd failed with a status of 8


Could any one point me in the right direction I am new to san configuring I done it once before but it was just a case of going through a series of notes, Thanks for all your help (I will answer all question tommorrow as i' m off for the reset of the day)

Thanks