0 Replies Latest reply on Feb 17, 2009 6:48 AM by 807559

    StorageTek SAS RAID Internal HBA: CRITICAL ERROR after HBA replacement

    807559
      Has anyone seen the following error on T5220 or T5240 after replacing the StorageTek SAS RAID Internal HBA?

      {0} ok boot
      Waiting for AAC Controller to start: . . . . . . . . . . Started Config Changes:
      1 ->One or more device either moved or removed
      or not responding or added
      2 ->One or more device either moved or removed
      or not responding or added
      Press <ENTER> to accept current config changes - with in 30 seconds (Default - Ignore changes and check the setup) <ENTER> Pressed. Current Config is accepted Boot device: /pci@400/pci@0/pci@c/scsi@0/disk@0,0:a File and args:
      Config Changes:
      1 ->!!!CRITICAL ERROR: Memory retention failure, unflushed cache lost!!!
      2 ->Channel Configuration error on channel Press <ENTER> to accept current config changes - with in 30 seconds (Default - Ignore changes and check the setup) <ENTER> Pressed. Current Config is accepted
      ERROR: /pci@400/pci@0/pci@c/scsi@0: Last Trap: Fast Data Access MMU Miss
      {0} ok

      After a powercycle, the machine boots just fine. All RAID configurations are normal. I would just like to know what the error message means.

      Thank You

      Edited by: meteortorrey on Feb 16, 2009 10:47 PM