2 Replies Latest reply: Jan 17, 2011 1:25 AM by 482053 RSS

    connecting storagetek 6120 on sun fire 4800 with solaris 9

    482053
      Hello all
      I have a Sun Fire 4800. It has attached a storedge d240 that has the OS disks and the removable media and a storage Storagetek 6120. There are no fiber switches. On storage there were configured Luns and the system could access and store the date.
      However due to some important issues I had to replace both disks on the Storedge device and reinstall Solaris 9.
      Currently Solaris 9 can't see the configured disks on the storage.
      I tried devfsadm but still the format command doesn't show any disks.
      Do I need to configure any special files anywere?
      Do I need to install any aditional packages?
      Do I need to input any special commands in Solaris or in OBP?

      Currently I am applying a patches.
      Any suggestions?
      Any help?

      Here is some info from the prtconf if that may give a lead.

      pci, instance #3
      SUNW,qlc (driver not attached)
      fp (driver not attached)
      disk (driver not attached)
      pci, instance #4
      bootbus-controller, instance #1
      pci, instance #5
      SUNW,qlc (driver not attached)
      fp (driver not attached)
      disk (driver not attached)


      Also here are the corresponding entries in format before the reinstallation

      2. c6t60003BA13EC170003FBB8F3B0006D676d0 <SUN-T4-0300 cyl 34522 alt 2 hd 224 sec 64>
      /scsi_vhci/ssd@g60003ba13ec170003fbb8f3b0006d676
      3. c6t60003BA13EC170003FBB8F150001A006d0 <SUN-T4-0300 cyl 34522 alt 2 hd 224 sec 64>
      /scsi_vhci/ssd@g60003ba13ec170003fbb8f150001a006


      In the opb the probe-scsi-all has the following output

      {12} ok probe-scsi-all


      /ssm@0,0/pci@1d,600000/pci@1/scsi@5


      /ssm@0,0/pci@1d,600000/pci@1/scsi@4


      /ssm@0,0/pci@1c,600000/SUNW,qlc@1
      LiD HA LUN --- Port WWN --- ----- Disk description -----
      2 e4 0 20030003ba13eb9b SUN T4 0300
      2 e4 1 20030003ba13eb9b SUN T4 0300


      /ssm@0,0/pci@19,600000/SUNW,qlc@1
      LiD HA LUN --- Port WWN --- ----- Disk description -----
      1 e8 0 20030003ba13ec17 SUN T4 0300
      1 e8 1 20030003ba13ec17 SUN T4 0300


      /ssm@0,0/pci@18,600000/pci@1/scsi@2,1
      Target 0
      Unit 0 Disk FUJITSU MAN3367M SUN36G 1804
      Target 1
      Unit 0 Disk FUJITSU MAP3367N SUN36G 0401
      Target 2
      Unit 0 Processor Sun D240 1.09
      Target 3
      Unit 0 Processor Sun D240 1.09
      Target 4
      Unit 0 Removable Tape HP C5683A C005
      Target 6
      Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009


      /ssm@0,0/pci@18,600000/pci@1/scsi@2
      Target 6
      Unit 0 Removable Tape HP Ultrium 4-SCSI W51D{12} ok probe-scsi-all


      /ssm@0,0/pci@1d,600000/pci@1/scsi@5


      /ssm@0,0/pci@1d,600000/pci@1/scsi@4


      /ssm@0,0/pci@1c,600000/SUNW,qlc@1
      LiD HA LUN --- Port WWN --- ----- Disk description -----
      2 e4 0 20030003ba13eb9b SUN T4 0300
      2 e4 1 20030003ba13eb9b SUN T4 0300


      /ssm@0,0/pci@19,600000/SUNW,qlc@1
      LiD HA LUN --- Port WWN --- ----- Disk description -----
      1 e8 0 20030003ba13ec17 SUN T4 0300
      1 e8 1 20030003ba13ec17 SUN T4 0300


      /ssm@0,0/pci@18,600000/pci@1/scsi@2,1
      Target 0
      Unit 0 Disk FUJITSU MAN3367M SUN36G 1804
      Target 1
      Unit 0 Disk FUJITSU MAP3367N SUN36G 0401
      Target 2
      Unit 0 Processor Sun D240 1.09
      Target 3
      Unit 0 Processor Sun D240 1.09
      Target 4
      Unit 0 Removable Tape HP C5683A C005
      Target 6
      Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009


      /ssm@0,0/pci@18,600000/pci@1/scsi@2
      Target 6
      Unit 0 Removable Tape HP Ultrium 4-SCSI W51D{12} ok probe-scsi-all


      /ssm@0,0/pci@1d,600000/pci@1/scsi@5


      /ssm@0,0/pci@1d,600000/pci@1/scsi@4


      /ssm@0,0/pci@1c,600000/SUNW,qlc@1
      LiD HA LUN --- Port WWN --- ----- Disk description -----
      2 e4 0 20030003ba13eb9b SUN T4 0300
      2 e4 1 20030003ba13eb9b SUN T4 0300


      /ssm@0,0/pci@19,600000/SUNW,qlc@1
      LiD HA LUN --- Port WWN --- ----- Disk description -----
      1 e8 0 20030003ba13ec17 SUN T4 0300
      1 e8 1 20030003ba13ec17 SUN T4 0300


      /ssm@0,0/pci@18,600000/pci@1/scsi@2,1
      Target 0
      Unit 0 Disk FUJITSU MAN3367M SUN36G 1804
      Target 1
      Unit 0 Disk FUJITSU MAP3367N SUN36G 0401
      Target 2
      Unit 0 Processor Sun D240 1.09
      Target 3
      Unit 0 Processor Sun D240 1.09
      Target 4
      Unit 0 Removable Tape HP C5683A C005
      Target 6
      Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009


      /ssm@0,0/pci@18,600000/pci@1/scsi@2
      Target 6
      Unit 0 Removable Tape HP Ultrium 4-SCSI W51D

      also the command devfsadm produces the following messages

      Dec 14 23:12:00 sf4800 krtld: /kernel/drv/sparcv9/fcsm: undefined symbol
      Dec 14 23:12:00 sf4800 krtld: 'fc_ulp_get_port_login_params'
      Dec 14 23:12:00 sf4800 krtld: WARNING: mod_load: cannot load module 'fcsm'


      Thanks

      Edited by: IOANNIS on Dec 14, 2010 11:11 AM

      Edited by: IOANNIS on Dec 14, 2010 11:13 AM

      Edited by: IOANNIS on Dec 14, 2010 12:51 PM

      Edited by: IOANNIS on Dec 14, 2010 1:15 PM
        • 1. Re: connecting storagetek 6120 on sun fire 4800 with solaris 9
          Nik
          It's look like FC- adapter's driver problem.

          You should install StorageTek SAN 4.4 and patch it.
          Previos - it possible download on www.sun.com/downlad.

          now - try find on support.oracle.com
          • 2. Re: connecting storagetek 6120 on sun fire 4800 with solaris 9
            482053
            Hello
            Following assistance with Oracle
            In order for Solaris OS to access the FC storage, the following procedure must be followed AFTER the installation and the first reboot have been completed.
            1) Install EIS Profile and make sure to answer yes to the SFS (Storage Foundation Services) question
            2) After the EIS Profile has been installed, perform a full OS Patch and reboot
            3) AGAIN access the EIS DVD and install all patches that are under patch/SAN. There is a solo package that must be installed first and the folder patch/SAN/9 that includes additional patches that have to be installed.
            4) Reboot with -- -r
            5) The output of the format command should display the disks.