10 Replies Latest reply on Feb 24, 2011 10:13 PM by Todd Little-Oracle

    CMDTUX_CAT:1098: ERROR: Can't create queue

    839885
      I have Tuxedo 8.1 installed on win 2003 32 bit box.

      Whenever I am trying tmboot -y getting the error message as below:--

      CMDTUX_CAT:1098: ERROR: Can't create queue

      In wslog file it shows as :
      LIBWSC_CAT:1037: ERROR: Network message receive failure
      LIBWSC_CAT:1059: ERROR: WSL returns error on connection request
      LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
      LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
      LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level

      I know some wrong information in my ubbconfig file, but not able to find.
      My ubbconfig file is :
      *RESOURCES
      IPCKEY 66490
      UID 0
      GID 0
      PERM 0666
      MAXACCESSERS 50
      MAXSERVERS 50
      MAXSERVICES 50
      MASTER "USTR-VM-0928"
      SCANUNIT 10
      BBLQUERY 180
      BLOCKTIME 30
      SANITYSCAN 30
      MODEL SHM
      LDBAL Y
      NOTIFY SIGNAL
      USIGNAL SIGUSR1
      TAGENT "TAGENT"
      *MACHINES
      "USTR-VM-0928" LMID= "USTR-VM-0928"
      TYPE="i386NT"
      MAXWSCLIENTS=10
      TUXDIR="c:\bea\tuxedo8.1"
      APPDIR="c:\oltp"
      ENVFILE="c:\oltp\envfile"
      TLOGDEVICE="c:\oltp\tlog"
      TLOGNAME=tlog
      TUXCONFIG="c:\oltp\tuxconfig"
      ULOGPFX="c:\oltp\ulog"

      *GROUPS

      K_GROUP1 GRPNO=1 LMID="USTR-VM-0928"

      K_GROUP2 GRPNO=2 LMID="USTR-VM-0928"

      K_GROUP3 GRPNO=3 LMID="USTR-VM-0928"

      *SERVERS
      DEFAULT: RESTART=Y MAXGEN=5 REPLYQ=Y

      WSL SRVGRP=K_GROUP3 SRVID=3 CLOPT= "-A -- -n //192.63.222.176:3050"

      #"-A -- -n0x00021e45c03fdeb0 -w C:\bea\tuxedo8.1\bin\WSH -m 1 "
      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=1 CONV=Y
      CLOPT="-- -sA -ljdoe,7,jdoe,tpscon"
      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=2
      CLOPT="-- -sA -ljdoe,7,jdoe,unsolmsg"
      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=3
      CLOPT="-- -sA -ljdoe,7,jdoe,bromsg"
      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=11 CLOPT=
      "-s MPR_TBL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,1"
      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=12 CLOPT=
      "-s MPR_COL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,2"
      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=13 CLOPT=
      "-s MPR_SQL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,3"

      *SERVICES
      DEFAULT: PRIO=50 LOAD=50 AUTOTRAN=N

      map_server
      WSH

      Service: TListen8.1 (3050) is running.

      Please help me regarding this.

      Rajeev
        • 1. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
          user734005
          The WSL port should be different from the TListen port.
          • 2. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
            839885
            After changing port number, Still getting the same problem.
            • 3. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
              Todd Little-Oracle
              Hi,

              Can you please post the entire ULOG and the entire output from tmboot?

              Thanks,
              Todd Little
              Oracle Tuxedo Chief Architect
              • 4. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
                839885
                ULOG contains the following:--

                024412.USTR-VM-0928!tmboot.4000.2672.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
                024412.USTR-VM-0928!tmboot.4000.2672.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
                024412.USTR-VM-0928!tmboot.4000.2672.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue
                024529.USTR-VM-0928!tmloadcf.1248.3360.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
                024529.USTR-VM-0928!tmloadcf.1248.3360.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 880 512-byte blocks)
                024530.USTR-VM-0928!tmloadcf.1248.3360.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file c:\oltp\tuxconfig has been created
                024548.USTR-VM-0928!tmboot.3584.2572.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
                024548.USTR-VM-0928!tmboot.3584.2572.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
                024548.USTR-VM-0928!tmboot.3584.2572.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue
                071016.USTR-VM-0928!tmloadcf.132.3896.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
                071016.USTR-VM-0928!tmloadcf.132.3896.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 880 512-byte blocks)
                071016.USTR-VM-0928!tmloadcf.132.3896.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file c:\oltp\tuxconfig has been created
                071023.USTR-VM-0928!tmboot.3596.3920.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
                071023.USTR-VM-0928!tmboot.3596.3920.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
                071023.USTR-VM-0928!tmboot.3596.3920.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue

                When I executed tmloadcf -y ubbconfig, one folder with name .adm and one configuration file with name tuxconfig are created.

                Then I did tmboot -y, it returns error as :
                Booting all admin and server processes in c:\oltp\tuxconfig

                tmboot: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue

                I checked wslog file for more information:--

                022711.USTR-VM-0928!?proc.3452.3688.0: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
                022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1037: ERROR: Network message receive failure
                022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1059: ERROR: WSL returns error on connection request
                022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
                022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
                022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level

                My ubbconfig file contains the following:--
                *RESOURCES
                IPCKEY 68990
                UID 0
                GID 0
                PERM 0666
                MAXACCESSERS 50
                MAXSERVERS 50
                MAXSERVICES 50
                MASTER "USTR-VM-0928"
                SCANUNIT 10
                BBLQUERY 180
                BLOCKTIME 30
                SANITYSCAN 30
                MODEL SHM
                LDBAL Y
                NOTIFY SIGNAL
                USIGNAL SIGUSR1
                TAGENT "TAGENT"

                *MACHINES
                "USTR-VM-0928" LMID= "USTR-VM-0928"
                TYPE="i386NT"
                MAXWSCLIENTS=10
                TUXDIR="c:\bea\tuxedo8.1"
                APPDIR="c:\oltp"
                ENVFILE="c:\oltp\envfile"
                TLOGDEVICE="c:\oltp\tlog"
                TLOGNAME=tlog
                TUXCONFIG="c:\oltp\tuxconfig"
                ULOGPFX="c:\oltp\ulog"

                *GROUPS

                K_GROUP1 GRPNO=1 LMID="USTR-VM-0928"

                K_GROUP2 GRPNO=2 LMID="USTR-VM-0928"

                K_GROUP3 GRPNO=3 LMID="USTR-VM-0928"

                *SERVERS
                DEFAULT: RESTART=Y MAXGEN=5 REPLYQ=Y
                WSL SRVGRP=K_GROUP3 SRVID=3 CLOPT=
                "-A -- -n0x00020beac03dfc14 -w C:\oltp\wsenvfile\WSH -m 1"

                #### WSL SRVGRP=K_GROUP3 SRVID=3 CLOPT= "-A -- -n //192.61.252.20:279 -m 2 -M 5 -x 5f"

                "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=1 CONV=Y
                CLOPT="-- -sA -ljdoe,7,jdoe,tpscon"
                "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=2
                CLOPT="-- -sA -ljdoe,7,jdoe,unsolmsg"
                "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=3
                CLOPT="-- -sA -ljdoe,7,jdoe,bromsg"
                "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=11 CLOPT=
                "-s MPR_TBL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,1"
                "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=12 CLOPT=
                "-s MPR_COL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,2"
                "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=13 CLOPT=
                "-s MPR_SQL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,3"

                *SERVICES
                DEFAULT: PRIO=50 LOAD=50 AUTOTRAN=N

                map_server
                WSH

                I tried many other option within Server section for WSL, but always getting the same error.

                Please help me regarding this.

                Thanks

                Rajeev
                • 5. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
                  user734005
                  Is the Tuxedo IPC deamon/process running on your machine? It defaults to listen on port 3050. I see your WSL is also configured to run on port 3050 (0bea). Obviously both processes cannot listen on the same port. You should see the Tuxedo IPC in the Windows Control Panel.
                  • 6. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
                    Todd Little-Oracle
                    Hi,

                    Have you ever been able to run a Tuxedo application on this machine? Can you try running the simpapp sample application located in $TUXDIR\samples\atmi\simpapp and see if that runs. I'm not sure your problem is related to the WSL directly.

                    Regards,
                    Todd Little
                    Oracle Tuxedo Chief Architect
                    • 7. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
                      839885
                      Todd,

                      Yes some time back (Around 6 months before) I was able to run a Tuxedo application on this machine.

                      I have installed Tuxedo 8.1 on win 2003 x 32 bit box.

                      Whenever I am trying tmboot -y, I am getting the below error

                      C:\oltp>tmboot -y
                      Booting all admin and server processes in c:\oltp\tuxconfig

                      tmboot: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue


                      For your reference I am putting ubbconfig, ulog and wslog file. Please have look and suggest me what changes I need to do.

                      ubbconfig:--

                      *RESOURCES
                      IPCKEY 66490
                      UID 0
                      GID 0
                      PERM 0666
                      MAXACCESSERS 50
                      MAXSERVERS 50
                      MAXSERVICES 50
                      MASTER "USTR-VM-0928"
                      SCANUNIT 10
                      BBLQUERY 180
                      BLOCKTIME 30
                      SANITYSCAN 30
                      MODEL SHM
                      LDBAL Y
                      NOTIFY SIGNAL
                      USIGNAL SIGUSR1
                      TAGENT "TAGENT"
                      *MACHINES
                      "USTR-VM-0928" LMID= "USTR-VM-0928"
                      TYPE="i386NT"
                      MAXWSCLIENTS=10
                      TUXDIR="c:\bea\tuxedo8.1"
                      APPDIR="c:\oltp"
                      ENVFILE="c:\oltp\envfile"
                      TLOGDEVICE="c:\oltp\tlog"
                      TLOGNAME=tlog
                      TUXCONFIG="c:\oltp\tuxconfig"
                      ULOGPFX="c:\oltp\ulog"
                      *GROUPS

                      K_GROUP1 GRPNO=1 LMID="USTR-VM-0928"

                      K_GROUP2 GRPNO=2 LMID="USTR-VM-0928"

                      K_GROUP3 GRPNO=3 LMID="USTR-VM-0928"

                      *SERVERS
                      DEFAULT: RESTART=Y MAXGEN=5 REPLYQ=Y
                      WSL SRVGRP=K_GROUP3 SRVID=3 CLOPT=
                      "-A -- -n0x00020116c03dfc14 -w C:\bea\tuxedo8.1\bin\WSH -m 1 -dC:\oltp\wsenvfile"
                      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=1 CONV=Y
                      CLOPT="-- -sA -ljdoe,7,jdoe,tpscon"
                      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=2
                      CLOPT="-- -sA -ljdoe,7,jdoe,unsolmsg"
                      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=3
                      CLOPT="-- -sA -ljdoe,7,jdoe,bromsg"
                      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=11 CLOPT=
                      "-s MPR_TBL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,1"
                      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=12 CLOPT=
                      "-s MPR_COL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,2"
                      "c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=13 CLOPT=
                      "-s MPR_SQL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,3"
                      *SERVICES
                      DEFAULT: PRIO=50 LOAD=50 AUTOTRAN=N

                      map_server
                      WSH

                      ULOG:--

                      085747.USTR-VM-0928!tmloadcf.1836.264.-2: 02-22-2011: Tuxedo Version 8.1 32-bit Windows.
                      085747.USTR-VM-0928!tmloadcf.1836.264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 880 512-byte blocks)
                      085747.USTR-VM-0928!tmloadcf.1836.264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file c:\oltp\tuxconfig has been created
                      085756.USTR-VM-0928!tmboot.2300.3624.-2: 02-22-2011: Tuxedo Version 8.1 32-bit Windows.
                      085756.USTR-VM-0928!tmboot.2300.3624.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
                      085756.USTR-VM-0928!tmboot.2300.3624.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue


                      WSLOG:--

                      084012.USTR-VM-0928!?proc.3896.3436.0: LIBWSC_CAT:1353: ERROR: Encoding/decoding of TPINIT buffer failed


                      Please help me regarding this.

                      Regards,

                      Rajeev
                      • 8. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
                        Todd Little-Oracle
                        Hi,

                        Can you please try and run the simpapp sample application on the same machine you are having problems with and post the results here?

                        Regards,'
                        Todd Little
                        Oracle Tuxedo Chief Architect
                        • 9. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
                          839885
                          Todd,

                          As per your suggestion, I run the simpapp sample application on the same machine.

                          I did the following steps:--

                          (1) tmloadcf -y ubbsimple, it created the tuxconfig file.

                          (2) Then tmboot -y, throw error message as below:--

                          Booting all admin and server processes in c:\oltp\tuxconfig

                          tmboot: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue

                          ubbsimple file contains the following:--

                          #     (c) 2003 BEA Systems, Inc. All Rights Reserved.
                          #ident     "@(#) samples/atmi/simpapp/ubbsimple     $Revision: 1.5 $"

                          #Skeleton UBBCONFIG file for the TUXEDO Simple Application.
                          #Replace the <bracketed> items with the appropriate values.

                          *RESOURCES
                          IPCKEY          123456

                          #Example:
                          #IPCKEY          123456

                          DOMAINID     simpapp
                          MASTER     "USTR-VM-0928"
                          MAXACCESSERS     10
                          MAXSERVERS     5
                          MAXSERVICES     10
                          MODEL          SHM
                          LDBAL          N

                          *MACHINES

                          DEFAULT:

                                    APPDIR="c:\oltp\simpapp"
                                    TUXCONFIG="c:\oltp\tuxconfig"
                                    TUXDIR="c:\bea\tuxedo8.1"

                          "USTR-VM-0928"     LMID="USTR-VM-0928"

                          *GROUPS
                          GROUP1
                               LMID="USTR-VM-0928"     GRPNO=1     OPENINFO=NONE

                          *SERVERS
                          DEFAULT:
                                    CLOPT="-A"

                          simpserv     SRVGRP=GROUP1 SRVID=1

                          *SERVICES
                          TOUPPER



                          ULOG file contains the following error message:--

                          021724.USTR-VM-0928!tmloadcf.3448.4064.-2: 02-23-2011: Tuxedo Version 8.1 32-bit Windows.
                          021724.USTR-VM-0928!tmloadcf.3448.4064.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 880 512-byte blocks)
                          021725.USTR-VM-0928!tmloadcf.3448.4064.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file c:\oltp\tuxconfig has been created
                          021750.USTR-VM-0928!tmboot.2128.3744.-2: 02-23-2011: Tuxedo Version 8.1 32-bit Windows.
                          021750.USTR-VM-0928!tmboot.2128.3744.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
                          021750.USTR-VM-0928!tmboot.2128.3744.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue


                          Regards
                          Rajeev
                          • 10. Re: CMDTUX_CAT:1098: ERROR: Can't create queue
                            Todd Little-Oracle
                            Hi Rajeev,

                            OK, thanks for that information. So obviously it is something wrong with the installation or the environment. Can you verify that the Oracle ProcMGR service is started and running?

                            Regards,
                            Todd Little
                            Oracle Tuxedo Chief Architect