Skip to Main Content
Forums

Oracle Database Discussions

Announcement

For appeals, questions and feedback about Oracle Forums, please email oracle-forums-moderators_us@oracle.com. Technical questions should be asked in the appropriate category. Thank you!

Interested in getting your voice heard by members of the Developer Marketing team at Oracle? Check out this post for AppDev or this post for AI focus group information.

Oracle patch

785153Apr 8 2011 — edited Apr 8 2011
I have Windows XP with 10.2.0.1.0

it failed on patch, please see below.
Would anyone please help.


D:\Oracle 32-Bit\10349197>opatch apply
Invoking OPatch 10.2.0.1.0

Oracle interim Patch Installer version 10.2.0.1.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..


Oracle Home : C:\oracle\product\10.2.0\db_1
Central Inventory : n/a
from : C:\oracle\product\10.2.0\Inventory
OPatch version : 10.2.0.1.0
OUI version : 10.2.0.1.0
OUI location : C:\oracle\product\10.2.0\db_1\oui
Log file location : C:\oracle\product\10.2.0\db_1\cfgtoollogs\opatch\opatch-2011_Apr_08_14-08-15-EDT_Fri.log

ApplySession applying interim patch '10349197' to OH 'C:\oracle\product\10.2.0\db_1'
Apply Session failed: ApplySession failed to prepare the system. ApplySession: Required component(s) [ oracle.rdbms.rsf, 10.2.0.4.0 ] not present in the Oracle Home or a higher version found.
System intact, OPatch will not attempt to restore the system

OPatch failed with error code = 73

D:\Oracle 32-Bit\10349197>

Comments

AlexeyDev
First try to upgrade Opatch to last version 10.2.0.5
sb92075
oracle.rdbms.rsf, 10.2.0.4.0 ] not present in the Oracle Home
Oracle s/w needs to be at V10.2.0.4 before applying the patch
The patch you tried to apply should be applied on top of 10.2.0.4.0, you have 10.2.0.1.0. First apply the 10.2.0.4 patchset, then apply the one-off. Or better yet skip all the way to 10.2.0.5.
726263
Were is your oracle inventory location ?

KDSDBA
OCP
785153
Do you mean I should down load software 10.2.0.4.0 and install by using OUI installer ?
785153
My Inventory path as below:
C:\oracle\product\10.2.0\Inventory
sb92075
Do you mean I should down load software 10.2.0.4.0 and install by using OUI installer ?
Since V10 is no longer fully supported, I recommend that you install V11.2 & use it.
785153
I don't quite understand. Do you mean I need to upgrade to 10.2.0.4 then do the patch?
I have never done patch before, so please help.
726263
You should review the README file in the patch zip file and besure you have the correct database install.
You may also need to upgrade your OPatch as well it is too lower of verison.

On WINDOWS the location is usually C:\Program Files\Oracle...


KDSDBA
OCP
orawiss
Hello,
You need to upgrade to 10.2.0.4.0, after that you can apply the patch.

To upgrade from 10.2.0.1 to 10.2.0.4 the patchset number is Patch 6810189

check Quick Reference For Patchset Numbers/Availability And Download [ID 554256.1] in the metalink.
Also, I would recommand to backup your whole database including control file, spfile etc... before doing any patch.

Good luck!
785153
Thank you very much for providing the information.

I have another system is Window server 2003 with 10.2.0.2.0
Should I upgrade to 10.2.0.4.0 before patching ? And, which patch number should I use ? What ID number in the metalink ?
Thank you for you help.





=============================================

Hello,
You need to upgrade to 10.2.0.4.0, after that you can apply the patch.

To upgrade from 10.2.0.1 to 10.2.0.4 the patchset number is Patch 6810189

check Quick Reference For Patchset Numbers/Availability And Download [ID 554256.1] in the metalink.
Also, I would recommand to backup your whole database including control file, spfile etc... before doing any patch.

Good luck!
orawiss
Hello,
The same thing, upgrade to 10.2.0.4, You can refer to the same document [ID 554256.1] in the metalink

Good luck!
785153
As now I have system windows 2003 with 10.2.0.2.0. And I have patch software as below. Do I still need to get a set of software to upgrade
to 10.2.0.4.0 and patch the below software - 10349197



D:\Oracle 32-Bit\10349197>dir
Volume in drive D is Oracle
Volume Serial Number is E796-16C2

Directory of D:\Oracle 32-Bit\10349197

03/30/2011 02:33 PM <DIR> .
03/30/2011 02:33 PM <DIR> ..
02/18/2010 04:37 AM 497,024 ocfs.sys.2k
02/18/2010 04:37 AM 486,400 ocfs.sys.2k8
01/13/2010 10:14 AM 9,088 orafencedrv.sys
01/13/2010 10:14 AM 10,240 orafencedrv.sys.2k8
01/07/2011 10:01 AM 2,925 patchmd.xml
01/12/2011 05:25 AM 86,223 README.html
05/15/2008 05:36 PM 37 README.txt
03/30/2011 02:33 PM <DIR> custom
03/30/2011 02:33 PM <DIR> etc
03/30/2011 02:37 PM <DIR> files



under files directory are:

Directory of D:\Oracle 32-Bit\10349197\files

03/30/2011 02:37 PM <DIR> .
03/30/2011 02:33 PM <DIR> ..
03/30/2011 02:33 PM <DIR> assistants
03/30/2011 02:34 PM <DIR> bin
03/30/2011 02:34 PM <DIR> Bundle
03/30/2011 02:34 PM <DIR> cfs
03/30/2011 02:34 PM <DIR> crs
03/30/2011 02:34 PM <DIR> ctx
03/30/2011 02:34 PM <DIR> dv
03/30/2011 02:35 PM <DIR> instantclient
03/30/2011 02:36 PM <DIR> javavm
03/30/2011 02:36 PM <DIR> jlib
03/30/2011 02:36 PM <DIR> lib
03/30/2011 02:36 PM <DIR> md
03/30/2011 02:37 PM <DIR> oci
03/30/2011 02:37 PM <DIR> odbc
03/30/2011 02:37 PM <DIR> odp.net
03/30/2011 02:37 PM <DIR> olap
03/30/2011 02:37 PM <DIR> rdbms
03/30/2011 02:37 PM <DIR> srvm
03/30/2011 02:37 PM <DIR> sysman
726263
Oracle has retired metalink it is now My Oracle Support > MOS.

KDSBDA
OCP
785153
How to get there MOS ? Would you please provide a link? Thanks
You must use the OPatch utility release 10.2.0.4.3 or later. You can download it from Oracle Metalink.
726263
Oracle has retired metalink it is now My Oracle Support > MOS.
This includes other countries outside of USA.

KDSBDA
OCP
Ensure that your Oracle Database installation is the same release for which you are applying this patch. In other words, only apply the Release 10.2.0.4 Bundle patch to an Oracle Database Release 10.2.0.4.
orawiss
782150 wrote:
How to get there MOS ? Would you please provide a link? Thanks
The link was already provided. Why you don't just read the doc?
I don't quite understand. Do you mean I need to upgrade to 10.2.0.4 then do the patch?
I have never done patch before, so please help.>
Skip 10.2.0.4 and patch to 10.2.0.5 while you still can. Download the 10.2.0.5 patchset from MOS and follow the instructions. Then download and install current OPatch and then download and apply current patch bundle on top of 10.2.0.5.
1 - 20
Locked Post
New comments cannot be posted to this locked post.

Post Details

Locked on May 6 2011
Added on Apr 8 2011
#general-database-discussions
20 comments
374 views