This content has been marked as final. Show 6 replies
I don't think the template's scripts create (control) the PS_HOME, it's part of the given golden image. On the PSOVM deployment, you can decide or not to install Cobol and PIA, but not Peopletools which is already there (same for Tuxedo and Weblogic).
I would definitely not want to use the delivered directory structure (/opt/oracle... and /home/psadm2...)Whether I understand, these are only used for demo and learning purpose, what's wrong to use these by default ? /home/psadm2 is nothing but PS_CFG_HOME which can be anything. With some effort, you could move these folders where ever you want, taking care of the left space on device though.
In the end, you could move the folders and create your own golden image for future deployment.
But right, so far I didn't spent much time on the scripts you are talking about.
For demo purposes I have no problem leaving them as they were created. However, according to Oracle's website, these templates are theoretically meant for more than demo and can be used for non-production and even production environments (with some additional configuration).
I can't imagine if you were going to use the templates for your actual deployment you would be stuck with their default directory structure. Yes, I could move things around, but it might be more trouble then its worth and I would think could possibly cause issues with Weblogic and Tuxedo since those installations always ask for the location of your PS_HOME. If I had to go through all of that pain, I might as well build it from scratch.
If you or anyone else has any experience with that script or can confirm if I can change the PS_HOME locations using it upon creation, I would love to know that!
pspeon2.0 wrote:Not according to the readme documentation coming within the template :
...However, according to Oracle's website, these templates are theoretically meant for more than demo and can be used for non-production and even production environments (with some additional configuration).
+PeopleSoft HCM templates, allow fast deployment of a small demo HCM environment...+
+The following considerations were made when these templates were designed:+
+· This template was built for demo purposes. Out of the box it is not recommended for production use....+"
I spent quite some time on this, eventhough that's much better to use the default delivered PSOVM I'd tend to think. I can say that the folder change cannot be done in ovm_configure_pre or in any other function, too much thing have to be done.
I have had a look into the ovm scripts running on deployment, as I thought everything is hardcoded in ovm scripts, so that's probably a huge task to go through every single script and modify the string to point to the new one. And still, that would be far not enough to make the all server working. Because all the software are already installed before the deployment (Peopletoools, Weblogic, Oracle) and they keep the directory in configuration files.
If you really want to change the directory, it will take some effort and time. Frankly speaking, that's not something I do daily...
Let's assume we want to change the /opt/oracle/psft/pt (default) to /appl.
As a reminder, /opt/oracle/psft/pt contains not only Peopletools, but all the required software (Tuxedo, Weblogic, Oracle client).
Here we go.
To move from the default /opt/oracle/psft/pt to /appl
*1. First step, change the name of the mount point*
Let's change the mount point to the new directory
[root@psovmfscmfp1 /]# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda2 7077468 668884 6335572 10% / /dev/xvda1 93307 11335 77155 13% /boot tmpfs 1048576 0 1048576 0% /dev/shm /dev/xvdb1 12902320 9904384 2604720 80% /opt/oracle/psft/pt <-- [root@psovmfscmfp1 /]# ls /opt/oracle/psft/pt bea cobol lost+found oracle-client tools
Then unmount the previous mount point, if it fails, check what is running and kill the process
[root@psovmfscmfp1 /]# more /etc/fstab LABEL=/ / ext3 defaults 1 1 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 LABEL=SWAP-VM swap swap defaults 0 0 #LABEL=FSCMTOOLS /opt/oracle/psft/pt ext3 defaults 1 2 <-- commented LABEL=FSCMTOOLS /appl ext3 defaults 1 2 <--
Create the new directory and mount (based on /etc/fstab)
[root@psovmfscmfp1 /]# umount /opt/oracle/psft/pt umount: /opt/oracle/psft/pt: device is busy umount: /opt/oracle/psft/pt: device is busy [root@psovmfscmfp1 /]# fuser -m /dev/xvdb1 /dev/xvdb1: 1496ce [root@psovmfscmfp1 /]# ps -ef|grep 1496 root 1496 1 0 03:10 ? 00:00:00 ./mflm_manager root 1681 1500 0 03:51 pts/0 00:00:00 grep 1496 [root@psovmfscmfp1 /]# kill -9 1496 [root@psovmfscmfp1 /]# umount /opt/oracle/psft/pt
Ok, from now the software are stored in the new directory.
[root@psovmfscmfp1 /]# mkdir /appl [root@psovmfscmfp1 /]# mount -a [root@psovmfscmfp1 /]# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda2 7077468 668888 6335568 10% / /dev/xvda1 93307 11335 77155 13% /boot tmpfs 1048576 0 1048576 0% /dev/shm /dev/xvdb1 12902320 9904384 2604720 80% /appl <-- [root@psovmfscmfp1 /]# ls /appl bea cobol lost+found oracle-client tools [root@psovmfscmfp1 /]#
*2. Change the profile (enabled on user's connection)*
As root, modify /etc/profile to reflect the new directory of every single folder under /appl
*3. Change the psadmin and psconfig files*
#export ORACLE_HOME=/opt/oracle/psft/pt/oracle-client/188.8.131.52-64bit export ORACLE_HOME=/appl/oracle-client/184.108.40.206-64bit ... #TUXDIR=/opt/oracle/psft/pt/bea/tuxedo TUXDIR=/appl/bea/tuxedo ... #. /opt/oracle/psft/pt/tools/psconfig.sh . /appl/tools/psconfig.sh #export PATH=/opt/oracle/psft/pt/tools/appserv:$PATH export PATH=/appl/tools/appserv:$PATH ... #export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit export COBDIR=/appl/cobol/svrexp-51_wp4-64bit ...
Here is one of the tricky point, when installed, Peopletools created symbolic link and environment variable according to the directory it was installed into, it has to be changed.
As psadm1, recreate symbolic link /appl/tools/appserv/psadmin
Environment variable is set in /appl/tools/psconfig.sh, update it :
[psadm1@psovmfscmfp1 appserv]$ pwd /appl/tools/appserv [psadm1@psovmfscmfp1 appserv]$ rm -f psadmin [psadm1@psovmfscmfp1 appserv]$ ln -s ../bin/psadmin .
*4. Change symbolic links in Oracle home directory*
#PS_HOME="/opt/oracle/psft/pt/tools"; export PS_HOME PS_HOME="/appl/tools"; export PS_HOME
Similarly to Peoplesoft, Oracle installation create symbolic links according to the folder it was installed into, change it :
*5. Reconfigure existing domains with new settings*
[root@psovmfscmfp1 ~]# su - psadm1 [psadm1@psovmfscmfp1 ~]$ cd $ORACLE_HOME/lib [psadm1@psovmfscmfp1 lib]$ rm -f libclntsh.so.10.1 libclntsh.so [psadm1@psovmfscmfp1 lib]$ ln -s /appl/oracle-client/220.127.116.11-64bit/lib/libclntsh.so.11.1 libclntsh.so [psadm1@psovmfscmfp1 lib]$ ln -s /appl/oracle-client/18.104.22.168-64bit/lib/libclntsh.so.11.1 libclntsh.so.10.1
To make the change persistent and take them in account, disconnect and reconnect as psadm2, reconfigure APPDOM and PRCSDOM (it will reinit the TUXDIR setting), configure has to be forced.
*6. Restart existing domains with new settings*
As psadm2, restart APPDOM and PRCS
*7. PIA settings to be change*
Similarly to Peopletools and Oracle, Weblogic installation took the folder it was installed into when set the environements variables, all have to be updated across all the configuratin files.
As psadm1, go to $PS_HOME/webserv/peoplesoft/bin, and change the files
*8. Start PIA*
--> setEnv.sh #PS_HOME=/opt/oracle/psft/pt/tools PS_HOME=/appl/tools #BEA_HOME=/opt/oracle/psft/pt/bea BEA_HOME=/appl/bea #WL_HOME=/opt/oracle/psft/pt/bea/wlserver_10.3 WL_HOME=/appl/bea/wlserver_10.3 --> singleserverStatus.sh #DOMAIN_HOME=/opt/oracle/psft/pt/tools/webserv/peoplesoft DOMAIN_HOME=/appl/tools/webserv/peoplesoft --> startPIA.sh #DOMAIN_HOME=/opt/oracle/psft/pt/tools/webserv/peoplesoft DOMAIN_HOME=/appl/tools/webserv/peoplesoft --> stopPIA.sh #DOMAIN_HOME=/opt/oracle/psft/pt/tools/webserv/peoplesoft DOMAIN_HOME=/appl/tools/webserv/peoplesoft --> createThreadDump.sh #DOMAIN_HOME=/opt/oracle/psft/pt/tools/webserv/peoplesoft DOMAIN_HOME=/appl/tools/webserv/peoplesoft --> /appl/bea/wlserver_10.3/common/bin/commEnv.sh # Set up BEA Home #BEA_HOME="/opt/oracle/psft/pt/bea" BEA_HOME="/appl/bea" # Set up Middleware Home #MW_HOME="/opt/oracle/psft/pt/bea" MW_HOME="/appl/bea" # Set up WebLogic Home #WL_HOME="/opt/oracle/psft/pt/bea/wlserver_10.3" WL_HOME="/appl/bea/wlserver_10.3" # Set up Common Modules Directory #MODULES_DIR="/opt/oracle/psft/pt/bea/modules" MODULES_DIR="/appl/bea/modules" # Set up Common Features Directory #FEATURES_DIR="/opt/oracle/psft/pt/bea/modules/features" FEATURES_DIR="/appl/bea/modules/features" ... # JAVA_HOME="/opt/oracle/psft/pt/bea/jrockit-jdk1.6.0_17" JAVA_HOME="/appl/bea/jrockit-jdk1.6.0_17"
As psadm2, start PIA
[psadm2@psovmfscmfp1 bin]$ cd $PS_HOME/webserv/peoplesoft/bin [psadm2@psovmfscmfp1 bin]$ ./startPIA.sh Attempting to start WebLogic Server PIA No activity will be logged to this window. Server activity will be logged to /appl/tools/webserv/peoplesoft/servers/PIA/logs/PIA_* PID for WebLogic Server PIA is: 3207 [psadm2@psovmfscmfp1 bin]$ tail -f /appl/tools/webserv/peoplesoft/servers/PIA/logs/PIA_stdout.log ... <May 5, 2011 6:16:24 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING> <May 5, 2011 6:16:24 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode> [psadm2@psovmfscmfp1 bin]$
You may want to reboot the server itself to restart the Cobol license, it should take in account the modification done earlier in /etc/profile, nothing else to do.
Enjoy the new directory. That way works absolutely fine.
For your record, I tried the following as well, trying to take the folder change in account to redeploy the vm with the new setting (but so far unsuccessfully, probably I have to restart the all thing from scratch)
Change ovm scripts_
Under /opt/oracle/psft/vm, make the following changes in the corresponding files
Reinit the VM_
--> installpia.sh #PT_HOME=/opt/oracle/psft/pt PT_HOME=/appl --> oraclevm-template-appbatch.sh # COBOL_INSTALLBITS_DIR=/opt/oracle/psft/pt/cobol/install-bits COBOL_INSTALLBITS_DIR=/appl/cobol/install-bits ... # COBOL_INSTALL_DIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit COBOL_INSTALL_DIR=/appl/cobol/svrexp-51_wp4-64bit ... # COBOL_MICROFOCUS_DIR=/opt/oracle/psft/pt/cobol/microfocus COBOL_MICROFOCUS_DIR=/appl/cobol/microfocus ... # COBOL_INSTALL_DIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit COBOL_INSTALL_DIR=/appl/cobol/svrexp-51_wp4-64bit ... # COBOL_MICROFOCUS_DIR=/opt/oracle/psft/pt/cobol/microfocus COBOL_MICROFOCUS_DIR=/appl/cobol/microfocus ... # cd /opt/oracle/psft/pt/cobol cd /appl/cobol --> oraclevm-template-utils.sh # PS_APP_HOME=$VM_APP_HOME/psft/pt/tools PS_APP_HOME=/appl/tools # PS_PIA_HOME=$VM_APP_HOME/psft/pt/tools PS_PIA_HOME=/appl/tools
As root using VNC client
Restart VM and reconfigure it as it was the first time, at that point I have had few issues on APPDOM/PIA and Cobol.
/usr/sbin/oraclevm-template --cleanup /usr/sbin/oraclevm-template --enable
Thank you so much for you extensive reply. Apparently they have conflicting information regarding the templates in their documentation because in their whitepaper they say:
The templates described herein may serve as a demonstration environment or as a starting point for a fully functioning PeopleSoft HCM installation. and The PeopleSoft HCM template is a fully functioning environment that contains a limited set of
demo data. All HCM 9.1 application functionality is present. This is equivalent to the demo database that is shipped in a traditional PeopleSoft HCM distribution. This means that it is possible to use upgrade tools to add production data to the Database. Indicting that you can use it for systems other them demo. I know I also read them stating somewhere that with additional configuration that you can have it as a production system.
I did not realize that you had responded back in May. I currently have a ticket open with Oracle regarding the changing of direcotries, so it will be interesting to see what they come back with.
Again, I appreciate all the detail and work you put in! its extremely helpful and something I can play with.