This content has been marked as final. Show 2 replies
You should have a SSL section under:
1) Log in to the ILOM-SP WEB interface.
2) Click --> Management --> SSL (or similar...)
The SSL page appears. There're some sections to the SSL page.
One section includes targets and properties and you can configure the SSL settings displayed
in this section page (example):
State = Enabled | Disabled
Roles = Administrator | Operator | Advanced | (none)
Address = 0.0.0.0
Port = 0
4) Save settings page, to save any changes made to this section.
The CLI approach is as below. You might want to update system firmware if the properties are missing on your server.
-> cd /SP/services/https
port = 443
servicestate = enabled
sslv2 = disabled <<<<----
sslv3 = enabled <<<<----
tlsv1 = enabled <<<<----
weak_ciphers = disabled <<<<----