This discussion is archived
1 Reply Latest reply: Aug 26, 2011 5:37 AM by rukbat RSS

Sun T6340 DIMM error

user13527731 Newbie
Currently Being Moderated
I'm trying to increase the RAM in a T6340 and have purchased some "compatible" DIMMs (from http://orcalogic.co.uk/asp/Sun_Sun_Blade_T6340_Server_Module_Memory-91475-m-1.htm).

On installing the DIMMs, the server refuses to power on and I get errors in the the ILOM event logs (see below).

Does anyone know if this is a RAM incompatibility or if this is fixable through a firmware update? I'm running ILOM SP firmware version 3.0.3.20.e.

I have removed all the original RAM as well as trying to mix it with the new RAM but only the original RAM works. When the new RAM is installed, the ILOM detects it, marks it as okay and sets the component_state to Enabled, which I interpret to mean the chip is okay(?).

Thanks for any help!

Event Log:

3779 Chassis Log critical Tue Aug 23 20:38:54 2011 Aug 23 20:38:54 FATAL: The HOST Processor has a configuration error, forcing a power-down
3778 Chassis Log major Tue Aug 23 20:38:54 2011 Aug 23 20:38:54 ERROR: Unsupported memory configuration
3777 Fault Fault critical Tue Aug 23 20:38:54 2011 SP detected fault at time Tue Aug 23 20:38:54 2011. Aug 23 20:38:54 ERROR: Unsupported memory configuration
3776 Chassis Log critical Tue Aug 23 20:38:54 2011 Aug 23 20:38:54 FATAL: DIMMs with unsupported voltage requirements are present
3775 Chassis Log major Tue Aug 23 20:38:54 2011 Aug 23 20:38:54 ERROR: MB/CMP1/BR1/CH1/D1: does not meet system voltage requirements
3774 Chassis Log major Tue Aug 23 20:38:54 2011 Aug 23 20:38:54 ERROR: MB/CMP1/BR1/CH1/D0: does not meet system voltage requirements
3773 Chassis Log major Tue Aug 23 20:38:54 2011 Aug 23 20:38:54 ERROR: MB/CMP1/BR1/CH0/D1: does not meet system voltage requirements
3772 Chassis Log major Tue Aug 23 20:38:54 2011 Aug 23 20:38:54 ERROR: MB/CMP1/BR1/CH0/D0: does not meet system voltage requirements
3771 Chassis Log major Tue Aug 23 20:38:54 2011 Aug 23 20:38:54 ERROR: MB/CMP1/BR0/CH1/D1: does not meet system voltage requirements
3770 Chassis Log major Tue Aug 23 20:38:53 2011 Aug 23 20:38:53 ERROR: MB/CMP1/BR0/CH1/D0: does not meet system voltage requirements
3769 Chassis Log major Tue Aug 23 20:38:53 2011 Aug 23 20:38:53 ERROR: MB/CMP1/BR0/CH0/D1: does not meet system voltage requirements
3768 Chassis Log major Tue Aug 23 20:38:53 2011 Aug 23 20:38:53 ERROR: MB/CMP1/BR0/CH0/D0: does not meet system voltage requirements
3767 Chassis Log major Tue Aug 23 20:38:53 2011 Aug 23 20:38:53 ERROR: MB/CMP0/BR1/CH1/D1: does not meet system voltage requirements
3766 Chassis Log major Tue Aug 23 20:38:53 2011 Aug 23 20:38:53 ERROR: MB/CMP0/BR1/CH1/D0: does not meet system voltage requirements
3765 Chassis Log major Tue Aug 23 20:38:53 2011 Aug 23 20:38:53 ERROR: MB/CMP0/BR1/CH0/D1: does not meet system voltage requirements
  • 1. Re: Sun T6340 DIMM error
    rukbat Guru Moderator
    Currently Being Moderated
    3776 Chassis Log critical Tue Aug 23 20:38:54 2011 Aug 23 20:38:54 FATAL: DIMMs with unsupported voltage requirements are present
    What is so difficult to understand?

    Return them to the vendor and get proper memory modules.
    Yes, the proper RAM may be significantly more expensive, but you won't be worying about their functionality.

    Additionally, keep in mind that ANY issue that can be vaguely traced to, or blamed upon, non-approved hardware will deny you proper assistance from Oracle technical support for as long as they stay in the chassis.

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points