4 Ответы Последний ответ: 06.09.2011 5:22, автор: Krishna-Oracle

    oracle 11g release 2 installation error

    650575
      Hi,

      I am facing below error while oracle slient installation.

      Checking swap space: must be greater than 150 MB. Actual 1498 MB Passed
      Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-09-02_12-44-52PM. Please wait ...[oracle@localhost database]$ [SEVERE] - Email Address Not Specified
      A log of this session is currently saved as: /tmp/OraInstall2011-09-02_12-44-52PM/installActions2011-09-02_12-44-52PM.log. Oracle recommends that if

      but setting

      oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false

      #-------------------------------------------------------------------------------
      # Specify the email address to which the notifications are to be sent.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.dbcontrol.emailAddress=nayana.chavda@elitecore.com

      #-------------------------------------------------------------------------------
      # Specify the SMTP server used for email notifications.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.dbcontrol.SMTPServer=



      and


      setting below two parameter

      SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
      #-- ...
      DECLINE_SECURITY_UPDATES=true


      i am getting diferent error


      $ Exception in thread "main" java.lang.NoClassDefFoundError
      at java.lang.Class.forName0(Native Method)
      at java.lang.Class.forName(Class.java:164)
      at java.awt.Toolkit$2.run(Toolkit.java:821)
      at java.security.AccessController.doPrivileged(Native Method)
      at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
      at javax.swing.UIManager.initialize(UIManager.java:1262)
      at javax.swing.UIManager.maybeInitialize(UIManager.java:1245)
      at javax.swing.UIManager.getUI(UIManager.java:851)
      at javax.swing.JPanel.updateUI(JPanel.java:104)
      at javax.swing.JPanel.<init>(JPanel.java:64)
      at javax.swing.JPanel.<init>(JPanel.java:87)
      at javax.swing.JPanel.<init>(JPanel.java:95)
      at oracle.sysman.oii.oiif.oiifo.OiifoOCMUI.<init>(OiifoOCMUI.java:125)
      at oracle.sysman.oii.oiif.oiifo.OiifoOCMInterfaceManager.<init>(OiifoOCMInterfaceManager.java:79)
      at oracle.sysman.oii.oiif.oiifo.OiifoOCMInterfaceManager.getInstance(OiifoOCMInterfaceManager.java:124)
      at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:123)
      at oracle.install.commons.util.Application.startup(Application.java:869)
      at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
      at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
      at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
      at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
      at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

      Please sugget on above error.

      below is the db_install.rsp file







      ####################################################################
      ## Copyright(c) Oracle Corporation 1998,2008. All rights reserved.##
      ## ##
      ## Specify values for the variables listed below to customize ##
      ## your installation. ##
      ## ##
      ## Each variable is associated with a comment. The comment ##
      ## can help to populate the variables with the appropriate ##
      ## values.                                   ##
      ## ##
      ## IMPORTANT NOTE: This file contains plain text passwords and ##
      ## should be secured to have read permission only by oracle user ##
      ## or db administrator who owns this installation. ##
      ## ##
      ####################################################################

      #------------------------------------------------------------------------------
      # Do not change the following system generated value.
      #------------------------------------------------------------------------------
      oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0

      #------------------------------------------------------------------------------
      # Specify the installation option.
      # It can be one of the following:
      # 1. INSTALL_DB_SWONLY
      # 2. INSTALL_DB_AND_CONFIG
      # 3. UPGRADE_DB
      #-------------------------------------------------------------------------------
      oracle.install.option=INSTALL_DB_SWONLY

      #-------------------------------------------------------------------------------
      # Specify the hostname of the system as set during the install. It can be used
      # to force the installation to use an alternative hostname rather than using the
      # first hostname found on the system. (e.g., for systems with multiple hostnames
      # and network interfaces)
      #-------------------------------------------------------------------------------
      ORACLE_HOSTNAME=localhost.localdomain

      #-------------------------------------------------------------------------------
      # Specify the Unix group to be set for the inventory directory.
      #-------------------------------------------------------------------------------
      UNIX_GROUP_NAME=oinstall

      #-------------------------------------------------------------------------------
      # Specify the location which holds the inventory files.
      #-------------------------------------------------------------------------------
      INVENTORY_LOCATION=/u01/app/oracle/oraInventory


      #-------------------------------------------------------------------------------
      # Specify the languages in which the components will be installed.
      #
      # en : English ja : Japanese
      # fr : French ko : Korean
      # ar : Arabic es : Latin American Spanish
      # bn : Bengali lv : Latvian
      # pt_BR: Brazilian Portuguese lt : Lithuanian
      # bg : Bulgarian ms : Malay
      # fr_CA: Canadian French es_MX: Mexican Spanish
      # ca : Catalan no : Norwegian
      # hr : Croatian pl : Polish
      # cs : Czech pt : Portuguese
      # da : Danish ro : Romanian
      # nl : Dutch ru : Russian
      # ar_EG: Egyptian zh_CN: Simplified Chinese
      # en_GB: English (Great Britain) sk : Slovak
      # et : Estonian sl : Slovenian
      # fi : Finnish es_ES: Spanish
      # de : German sv : Swedish
      # el : Greek th : Thai
      # iw : Hebrew zh_TW: Traditional Chinese
      # hu : Hungarian tr : Turkish
      # is : Icelandic uk : Ukrainian
      # in : Indonesian vi : Vietnamese
      # it : Italian
      #
      # Example : SELECTED_LANGUAGES=en,fr,ja
      #------------------------------------------------------------------------------
      SELECTED_LANGUAGES=en

      #------------------------------------------------------------------------------
      # Specify the complete path of the Oracle Home.
      #------------------------------------------------------------------------------
      ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1

      #------------------------------------------------------------------------------
      # Specify the complete path of the Oracle Base.
      #------------------------------------------------------------------------------
      ORACLE_BASE=/u01/app/oracle
      #------------------------------------------------------------------------------
      # Specify the installation edition of the component.
      #
      # The value should contain only one of these choices.
      # EE : Enterprise Edition
      # SE : Standard Edition
      # SEONE : Standard Edition One
      # PE : Personal Edition (WINDOWS ONLY)
      #------------------------------------------------------------------------------
      oracle.install.db.InstallEdition=EE

      #------------------------------------------------------------------------------
      # This variable is used to enable or disable custom install.
      #
      # true : Components mentioned as part of 'customComponents' property
      # are considered for install.
      # false : Value for 'customComponents' is not considered.
      #------------------------------------------------------------------------------
      oracle.install.db.isCustomInstall=false

      #------------------------------------------------------------------------------
      # This variable is considered only if 'IsCustomInstall' is set to true.
      #
      # Description: List of Enterprise Edition Options you would like to install.
      #
      # The following choices are available. You may specify any
      # combination of these choices. The components you choose should
      # be specified in the form "internal-component-name:version"
      # Below is a list of components you may specify to install.
      #
      # oracle.rdbms.partitioning:11.2.0.1.0 - Oracle Partitioning
      # oracle.rdbms.dm:11.2.0.1.0 - Oracle Data Mining
      # oracle.rdbms.dv:11.2.0.1.0 - Oracle Database Vault
      # oracle.rdbms.lbac:11.2.0.1.0 - Oracle Label Security
      # oracle.rdbms.rat:11.2.0.1.0 - Oracle Real Application Testing
      # oracle.oraolap:11.2.0.1.0 - Oracle OLAP
      #------------------------------------------------------------------------------
      oracle.install.db.customComponents=oracle.server:11.2.0.1.0,oracle.sysman.ccr:10.2.7.0.0,oracle.xdk:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network:11.2.0.1.0,oracle.network.listener:11.2.0.1.0,oracle.rdbms:11.2.0.1.0,oracle.options:11.2.0.1.0,oracle.rdbms.partitioning:11.2.0.1.0,oracle.oraolap:11.2.0.1.0,oracle.rdbms.dm:11.2.0.1.0,oracle.rdbms.dv:11.2.0.1.0,orcle.rdbms.lbac:11.2.0.1.0,oracle.rdbms.rat:11.2.0.1.0

      ###############################################################################
      # #
      # PRIVILEGED OPERATING SYSTEM GROUPS      #
      # ------------------------------------------ #
      # Provide values for the OS groups to which OSDBA and OSOPER privileges #
      # needs to be granted. If the install is being performed as a member of the #          
      # group "dba", then that will be used unless specified otherwise below.     #
      # #
      ###############################################################################

      #------------------------------------------------------------------------------
      # The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
      #------------------------------------------------------------------------------
      oracle.install.db.DBA_GROUP=DBA

      #------------------------------------------------------------------------------
      # The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
      #------------------------------------------------------------------------------
      oracle.install.db.OPER_GROUP=

      #------------------------------------------------------------------------------
      # Specify the cluster node names selected during the installation.
      #------------------------------------------------------------------------------
      oracle.install.db.CLUSTER_NODES=

      #------------------------------------------------------------------------------
      # Specify the type of database to create.
      # It can be one of the following:
      # - GENERAL_PURPOSE/TRANSACTION_PROCESSING
      # - DATA_WAREHOUSE
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
      #------------------------------------------------------------------------------
      # Specify the Starter Database Global Database Name.
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.globalDBName=DB11G

      #------------------------------------------------------------------------------
      # Specify the Starter Database SID.
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.SID=DB11G

      #------------------------------------------------------------------------------
      # Specify the Starter Database character set.
      #
      # It can be one of the following:
      # AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
      # EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
      # BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
      # AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
      # IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
      # KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
      # ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.characterSet=WE8ISO8859P15

      #------------------------------------------------------------------------------
      # This variable should be set to true if Automatic Memory Management
      # in Database is desired.
      # If Automatic Memory Management is not desired, and memory allocation
      # is to be done manually, then set it to false.
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.memoryOption=true

      #------------------------------------------------------------------------------
      # Specify the total memory allocation for the database. Value(in MB) should be
      # at least 256 MB, and should not exceed the total physical memory available
      # on the system.
      # Example: oracle.install.db.config.starterdb.memoryLimit=512
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.memoryLimit=

      #------------------------------------------------------------------------------
      # This variable controls whether to load Example Schemas onto the starter
      # database or not.
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.installExampleSchemas=false

      #------------------------------------------------------------------------------
      # This variable includes enabling audit settings, configuring password profiles
      # and revoking some grants to public. These settings are provided by default.
      # These settings may also be disabled.
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.enableSecuritySettings=true

      ###############################################################################
      # #
      # Passwords can be supplied for the following four schemas in the     #
      # starter database:                               #
      # SYS #
      # SYSTEM #
      # SYSMAN (used by Enterprise Manager) #
      # DBSNMP (used by Enterprise Manager) #
      # #
      # Same password can be used for all accounts (not recommended)           #
      # or different passwords for each account can be provided (recommended) #
      # #
      ###############################################################################

      #------------------------------------------------------------------------------
      # This variable holds the password that is to be used for all schemas in the
      # starter database.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.password.ALL=sys

      #-------------------------------------------------------------------------------
      # Specify the SYS password for the starter database.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.password.SYS=sys

      #-------------------------------------------------------------------------------
      # Specify the SYSTEM password for the starter database.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.password.SYSTEM=sys

      #-------------------------------------------------------------------------------
      # Specify the SYSMAN password for the starter database.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.password.SYSMAN=sys

      #-------------------------------------------------------------------------------
      # Specify the DBSNMP password for the starter database.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.password.DBSNMP=sys

      #-------------------------------------------------------------------------------
      # Specify the management option to be selected for the starter database.
      # It can be one of the following:
      # 1. GRID_CONTROL
      # 2. DB_CONTROL
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.control=DB_CONTROL

      #-------------------------------------------------------------------------------
      # Specify the Management Service to use if Grid Control is selected to manage
      # the database.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=

      #-------------------------------------------------------------------------------
      # This variable indicates whether to receive email notification for critical
      # alerts when using DB control.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false

      #-------------------------------------------------------------------------------
      # Specify the email address to which the notifications are to be sent.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.dbcontrol.emailAddress=nayana.chavda@elitecore.com

      #-------------------------------------------------------------------------------
      # Specify the SMTP server used for email notifications.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.dbcontrol.SMTPServer=


      ###############################################################################
      # #
      # SPECIFY BACKUP AND RECOVERY OPTIONS      #
      # ------------------------------------          #
      # Out-of-box backup and recovery options for the database can be mentioned #
      # using the entries below.                              #     
      # #
      ###############################################################################

      #------------------------------------------------------------------------------
      # This variable is to be set to false if automated backup is not required. Else
      # this can be set to true.
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.automatedBackup.enable=false

      #------------------------------------------------------------------------------
      # Regardless of the type of storage that is chosen for backup and recovery, if
      # automated backups are enabled, a job will be scheduled to run daily at
      # 2:00 AM to backup the database. This job will run as the operating system
      # user that is specified in this variable.
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.automatedBackup.osuid=

      #-------------------------------------------------------------------------------
      # Regardless of the type of storage that is chosen for backup and recovery, if
      # automated backups are enabled, a job will be scheduled to run daily at
      # 2:00 AM to backup the database. This job will run as the operating system user
      # specified by the above entry. The following entry stores the password for the
      # above operating system user.
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.automatedBackup.ospwd=

      #-------------------------------------------------------------------------------
      # Specify the type of storage to use for the database.
      # It can be one of the following:
      # - FILE_SYSTEM_STORAGE
      # - ASM_STORAGE
      #------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE

      #-------------------------------------------------------------------------------
      # Specify the database file location which is a directory for datafiles, control
      # files, redo logs.
      #
      # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=

      #-------------------------------------------------------------------------------
      # Specify the backup and recovery location.
      #
      # Applicable only when oracle.install.db.config.starterdb.storage=
      #-------------------------------------------------------------------------------
      oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=

      #-------------------------------------------------------------------------------
      # Specify the existing ASM disk groups to be used for storage.
      #
      # Applicable only when oracle.install.db.config.starterdb.storage=ASM
      #-------------------------------------------------------------------------------
      oracle.install.db.config.asm.diskGroup=

      #-------------------------------------------------------------------------------
      # Specify the password for ASMSNMP user of the ASM instance.
      #
      # Applicable only when oracle.install.db.config.starterdb.storage=ASM_SYSTEM
      #-------------------------------------------------------------------------------
      oracle.install.db.config.asm.ASMSNMPPassword=

      #------------------------------------------------------------------------------
      # Specify the My Oracle Support Account Username.
      #
      # Example : MYORACLESUPPORT_USERNAME=metalink
      #------------------------------------------------------------------------------
      MYORACLESUPPORT_USERNAME=

      #------------------------------------------------------------------------------
      # Specify the My Oracle Support Account Username password.
      #
      # Example : MYORACLESUPPORT_PASSWORD=password
      #------------------------------------------------------------------------------
      MYORACLESUPPORT_PASSWORD=

      #------------------------------------------------------------------------------
      # Specify whether to enable the user to set the password for
      # My Oracle Support credentials. The value can be either true or false.
      # If left blank it will be assumed to be false.
      #
      # Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
      #------------------------------------------------------------------------------
      SECURITY_UPDATES_VIA_MYORACLESUPPORT=

      #------------------------------------------------------------------------------
      # Specify whether user wants to give any proxy details for connection.
      # The value can be either true or false. If left blank it will be assumed
      # to be false.
      #
      # Example : DECLINE_SECURITY_UPDATES=false
      #------------------------------------------------------------------------------
      DECLINE_SECURITY_UPDATES=

      #------------------------------------------------------------------------------
      # Specify the Proxy server name. Length should be greater than zero.
      #
      # Example : PROXY_HOST=proxy.domain.com
      #------------------------------------------------------------------------------
      PROXY_HOST=

      #------------------------------------------------------------------------------
      # Specify the proxy port number. Should be Numeric and atleast 2 chars.
      #
      # Example : PROXY_PORT=25
      #------------------------------------------------------------------------------
      PROXY_PORT=

      #------------------------------------------------------------------------------
      # Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
      # blank if your proxy server requires no authentication.
      #
      # Example : PROXY_USER=username
      #------------------------------------------------------------------------------
      PROXY_USER=

      #------------------------------------------------------------------------------
      # Specify the proxy password. Leave PROXY_USER and PROXY_PWD
      # blank if your proxy server requires no authentication.
      #
      # Example : PROXY_PWD=password
      #------------------------------------------------------------------------------
      PROXY_PWD=




      Thanks in advance.