1 Reply Latest reply: Nov 22, 2011 12:00 PM by YTC1 RSS

    Using Xsane and scanners with S11

    YTC1
      I've got a couple of systems that have been using scanners with OpenSolaris (and S10 before that).

      A desktop and a laptop (both still snv_151a)

      I've built a new system with the fresh release of S11.

      I've added the sane packages

      image/scanner/xsane 0.997-0.175.0.0.0.0.0 i--
      image/scanner/xsane/sane-backends 1.0.19-0.175.0.0.0.2.537 i--
      image/scanner/xsane/sane-frontend 1.0.14-0.175.0.0.0.2.537 i--

      The system sees either of the scanners I have tried

      ---8<
      Nov 22 16:45:54 ytc1 usba: [ID 349649 kern.info]      Lexmark Lexmark X1100 Series 3169239
      Nov 22 16:45:54 ytc1 genunix: [ID 936769 kern.info] usbprn1 is /pci@0,0/pci1043,8389@12,1/hub@3/printer@2
      Nov 22 16:45:54 ytc1 genunix: [ID 408114 kern.info] /pci@0,0/pci1043,8389@12,1/hub@3/printer@2 (usbprn1) online
      Nov 22 16:45:54 ytc1 usba: [ID 349649 kern.info] usba:     no driver found for interface 0 (nodename: 'interface') of Lexmark X1100 Series 3169239
      ---8<

      The "no driver found" is also shown on the working snv_151 systems

      ---8<
      Nov 22 16:43:39 YTCLaptop usba: [ID 912658 kern.info] USB 1.10 device (usb43d,7b) operating at full speed (USB 1.x) on USB 1.10 external hub: printer@2, usbprn2 at bus address 4
      Nov 22 16:43:39 YTCLaptop usba: [ID 349649 kern.info] Lexmark X1100 Series 3169239
      Nov 22 16:43:39 YTCLaptop genunix: [ID 936769 kern.info] usbprn2 is /pci@0,0/pci1179,1@1a,1/hub@1/printer@2
      Nov 22 16:43:39 YTCLaptop genunix: [ID 408114 kern.info] /pci@0,0/pci1179,1@1a,1/hub@1/printer@2 (usbprn2) online
      Nov 22 16:43:39 YTCLaptop usba: [ID 349649 kern.info] usba: no driver found for interface 0 (nodename: 'interface') of Lexmark X1100 Series 3169239
      ---8<

      What did I miss out ?

      I can't remember having to do anything special with OpenSolaris (no upd_drv, not since S10). With OpenSol it "just worked".