This content has been marked as final. Show 3 replies
Use web browser instead of telnet!
CAM is web-based app
it has a CLI component, too - it's called SSCS
Check your /etc/hosts.
locahost should be resolved to 127.0.0.1 not to 10.0.8.93
Check that port 6789 is listen:
netstat -na | grep 6789
Check status svc:/system/webconsole:console
Try restart webconsole:
svcadm disable svc:/system/webconsole:console
svcadm enable svc:/system/webconsole:console
Edited by: Nik on 11.01.2012 4:17
What type of storage array do you have ? From the looks of it, you have a separate CAM host that connects to that array, so better do the following (if applicable):
1. ping the array's controller(s) from the CAM host, see if you get a reply
2. telnet to each controller
Both tests should be fine, or else you won't be able to log into CAM.