I am unable to login to my CAM.Details are -
CAM Version - CAM6.7
OS - Solaris 10
When I am trying to telnet localhost, it is not getting connected.
telnet localhost 6789
Check your /etc/hosts.
locahost should be resolved to 127.0.0.1 not to 10.0.8.93
Check that port 6789 is listen: netstat -na | grep 6789
Check status svc:/system/webconsole:console svcs svc:/system/webconsole:console
Try restart webconsole: svcadm disable svc:/system/webconsole:console svcadm enable svc:/system/webconsole:console
Edited by: Nik on 11.01.2012 4:17
What type of storage array do you have ? From the looks of it, you have a separate CAM host that connects to that array, so better do the following (if applicable):
1. ping the array's controller(s) from the CAM host, see if you get a reply
2. telnet to each controller
Both tests should be fine, or else you won't be able to log into CAM.