This discussion is archived
1 Reply Latest reply: Jan 20, 2012 8:11 AM by 836014 RSS

ILOM

871234 Newbie
Currently Being Moderated
Hi Experts,

I am trying to assign an IP to NetMgt port in X4170 by log in through serial port, the output for show cmd after assigned the ip, netmask and gateway is

-> show

/SP/network
Targets:
test

Properties:
commitpending = (Cannot show property)
dhcp_server_ip = none
ipaddress = 10.160.0.20
ipdiscovery = static
ipgateway = 10.160.0.1
ipnetmask = 255.255.255.0
macaddress = 00:21:28:84:16:F5
managementport = /SYS/MB/NET0
outofbandmacaddress = 00:21:28:84:16:F4
pendingipaddress = 10.160.0.20
pendingipdiscovery = static
pendingipgateway = 10.160.0.1
pendingipnetmask = 255.255.255.0
pendingmanagementport = /SYS/MB/NET0
sidebandmacaddress = 00:21:28:84:16:F5
state = enabled

Commands:
cd
set
show
when i am trying to ping host the output is

-> set ping=10.160.0.39
set: No such property /SP/network/ping

from host OS also not pinging, where could be the problem, please suggest me.

Thanks,
KK.

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points