0 Replies Latest reply: Mar 28, 2012 5:55 PM by 927129 RSS

    heart beat links.

    927129
      Hi forum,

      I am installing a cluster server ( x86 ) for the first time. 2 blades.
      Now while installing I am getting the following error.
      "ERROR
      -------
      Check the Heartbeat Link(s) specified in the template
      May be the wrong links specified or link connections are faulty"

      I suppose, this basically is some connection issue but I am unable to figure out exactly.
      I am using igb0 and igb1 on both the blades.
      following is the output of dladm show-dev command ( in case this is helpful)
      e1000g0 link: up speed: 100 Mbps duplex: full
      e1000g1 link: unknown speed: 0 Mbps duplex: half
      e1000g2 link: unknown speed: 0 Mbps duplex: half
      e1000g3 link: unknown speed: 0 Mbps duplex: half
      e1000g4 link: unknown speed: 0 Mbps duplex: half
      e1000g5 link: unknown speed: 0 Mbps duplex: half
      igb0 link: up speed: 100 Mbps duplex: full
      igb1 link: up speed: 100 Mbps duplex: full

      Please suggest on all the parameters I need to check, like port configuration etc.
      I am using 2 cross cables to connect igb0 of blade 0 to connect to igb0 of blade 1
      and igb1 of blade 0 to connect to igb1 of blade 1

      kindly suggest.

      Regards
      Sumeet