1 2 3 Previous Next 42 Replies Latest reply: Apr 24, 2012 11:35 AM by 930979 RSS

    Failing in R12 Post install steps

    930979
      Hi,

      I am trying to install R12.1.1 on Linux installed in vmware. My problem is similar to the one mentioned in the thread..

      R12 Rapidwiz postinstall step Http, Login page, Virtual dirve

      I have checked the hosts file as per the suggestion in the above thread and it is currently as below

      127.0.0.1 ebs localhost.localdomain
      192.168.1.11 ebs.oraapp.com ebs

      If I change the first line to localhost.localdomain localhost the services start fine but when I retry I get the message saying no installs found (RW-2004). Please help.

      More info on versions
      VMWare Player 4
      Oracle Linux 6.2 32 bit
      R12.1.1 and applied patch to update the rapidwizversion to 12.1.1.13

      Edited by: user978419 on Apr 16, 2012 10:32 AM
        • 1. Re: Failing in R12 Post install steps
          Hussein Sawwan-Oracle
          I have checked the hosts file as per the suggestion in the above thread and it is currently as below

          127.0.0.1 ebs localhost.localdomain
          192.168.1.11 ebs.oraapp.com ebs
          Please make sure your etc/hosts is formatted as per these docs.

          Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
          Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
          If I change the first line to localhost.localdomain localhost the services start fine but when I retry I get the message saying no installs found (RW-2004). Please help.
          What is the complete error message? Please start all the application services and click on the retry button.

          Thanks,
          Hussein
          • 2. Re: Failing in R12 Post install steps
            930979
            Thanks.. I did the following change

            Verify that the /etc/sysconfig/network file is formatted as follows:

            HOSTNAME=[node_name].[domain_name]

            and now I am not getitng the "No installs found error". Instead when I run adstrtal.sh, I am getting Database connection could not be established message. Do I need to change something after doing the above change.
            • 3. Re: Failing in R12 Post install steps
              Hussein Sawwan-Oracle
              and now I am not getitng the "No installs found error". Instead when I run adstrtal.sh, I am getting Database connection could not be established message. Do I need to change something after doing the above change.
              Please make sure you have the database and the database listener up and running, then run AutoConfig on the application tier node and make sure you get no errors.

              Thanks,
              Hussein
              • 4. Re: Failing in R12 Post install steps
                930979
                Can you please provide the steps how to do that? Thanks..
                • 5. Re: Failing in R12 Post install steps
                  Hussein Sawwan-Oracle
                  Can you please provide the steps how to do that? Thanks..
                  To verify that the database and the database listener are up and running, you can simply connect to the database remotely from your machine.

                  To run AutoConfig, please see (Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12 [ID 387859.1]).

                  Thanks,
                  Hussein
                  • 6. Re: Failing in R12 Post install steps
                    930979
                    I just ran ./lsnrctl status and it gave the following message

                    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
                    TNS-12541: TNS: no listener
                    TNS-12560: TNS:protocol adapter error
                    TNS-00511: No listener
                    Linux Error: 111: Conection refused

                    Seems like HOST is blank. Do I need to correct come file? Or do you suggest doing a clean install again?

                    Edited by: user978419 on Apr 16, 2012 1:29 PM
                    • 7. Re: Failing in R12 Post install steps
                      Hussein Sawwan-Oracle
                      I just ran ./lsnrctl status and it gave the following message

                      Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
                      TNS-12541: TNS: no listener
                      TNS-12560: TNS:protocol adapter error
                      TNS-00511: No listener
                      Linux Error: 111: Conection refused
                      Please post the contents of the listener.ora file under $TNS_ADMIN directory here.
                      Seems like HOST is blank. Do I need to correct come file? Or do you suggest doing a clean install again?
                      Please post the contents of the hosts file here.

                      Let us verify the above first before deciding whether to go with a fresh installation or not.

                      Thanks,
                      Hussein
                      • 8. Re: Failing in R12 Post install steps
                        930979
                        Thanks Hussein. I am not at y computer now. I will check that and post it in evening..
                        • 9. Re: Failing in R12 Post install steps
                          930979
                          Contents of the listener.ora file under $TNS_ADMIN directory


                          # $Header: admk80ln_ux.sql 120.9 2007/03/09 04:31:05 sbandla ship $
                          # LISTENER.ORA For Oracle Applications
                          # This file is automatically generated
                          APPS_VIS =
                          (ADDRESS_LIST =
                          (ADDRESS= (PROTOCOL= TCP)(Host= ebs)(Port= 1626))
                          )
                          SID_LIST_APPS_VIS =
                          (SID_LIST =
                          ( SID_DESC = ( SID_NAME = FNDSM )
                          ( ORACLE_HOME = /home/oracle/ebs/apps/tech_st/10.1.2 )
                          ( PROGRAM = /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/bin/FNDSM )
                          ( envs='MYAPPSORA=/home/oracle/ebs/apps/apps_st/appl/APPSVIS_ebs.env,PATH=/usr/bin:/usr/ccs/bin:/bin,FNDSM_SCRIPT=/home/oracle/ebs/inst/apps/VIS_ebs/admin/scripts/gsmstart.sh' )
                          )
                          ( SID_DESC = ( SID_NAME = FNDFS )
                          ( ORACLE_HOME = /home/oracle/ebs/apps/tech_st/10.1.2 )
                          ( PROGRAM = /home/oracle/ebs/apps/apps_st/appl/fnd/12.0.0/bin/FNDFS )
                          ( envs='EPC_DISABLED=TRUE,NLS_LANG=American_America.AL32UTF8,LD_LIBRARY_PATH=/home/oracle/ebs/apps/tech_st/10.1.2/lib32:/home/oracle/ebs/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/home/oracle/ebs/apps/tech_st/10.1.2/jdk/jre/lib/i386:/home/oracle/ebs/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/home/oracle/ebs/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/home/oracle/ebs/apps/apps_st/appl/sht/12.0.0/lib,SHLIB_PATH=/home/oracle/ebs/apps/tech_st/10.1.2/lib32:/home/oracle/ebs/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/home/oracle/ebs/apps/tech_st/10.1.2/jdk/jre/lib/i386:/home/oracle/ebs/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/home/oracle/ebs/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/home/oracle/ebs/apps/apps_st/appl/sht/12.0.0/lib,LIBPATH=/home/oracle/ebs/apps/tech_st/10.1.2/lib32:/home/oracle/ebs/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/home/oracle/ebs/apps/tech_st/10.1.2/jdk/jre/lib/i386:/home/oracle/ebs/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/home/oracle/ebs/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/home/oracle/ebs/apps/apps_st/appl/sht/12.0.0/lib,APPLFSTT=VIS_BALANCE;VIS;VIS_FO,APPLFSWD=/home/oracle/ebs/inst/apps/VIS_ebs/appl/admin;/home/oracle/ebs/inst/apps/VIS_ebs/appltmp;/home/oracle/ebs/apps/apps_st/comn/webapps/oacore/html/oam/nonUix/launchMode/restricted' )
                          )
                          )
                          STARTUP_WAIT_TIME_APPS_VIS = 0
                          CONNECT_TIMEOUT_APPS_VIS = 10
                          TRACE_LEVEL_APPS_VIS = OFF
                          LOG_DIRECTORY_APPS_VIS = /home/oracle/ebs/inst/apps/VIS_ebs/logs/ora/10.1.2/network
                          LOG_FILE_APPS_VIS = APPS_VIS
                          TRACE_DIRECTORY_APPS_VIS = /home/oracle/ebs/inst/apps/VIS_ebs/logs/ora/10.1.2/network
                          TRACE_FILE_APPS_VIS = APPS_VIS
                          ADMIN_RESTRICTIONS_APPS_VIS = OFF
                          IFILE = /home/oracle/ebs/inst/apps/VIS_ebs/ora/10.1.2/network/admin/VIS_ebs_listener_ifile.ora
                          SUBSCRIBE_FOR_NODE_DOWN_EVENT_APPS_VIS = OFF



                          contents of the hosts file:

                          127.0.0.1 localhost.localdomain localhost
                          192.168.1.18 ebs.oraapp.com ebs
                          • 10. Re: Failing in R12 Post install steps
                            Hussein Sawwan-Oracle
                            Contents of the listener.ora file under $TNS_ADMIN directory
                            You have just posted the contents of the application listener.ora file. What we are looking for is the database listener (under 11.1.0.7 $ORACLE_HOME/network/admin/<CONTEXT_NAME> directory).

                            Thanks,
                            Hussein
                            • 11. Re: Failing in R12 Post install steps
                              930979
                              I see only "Samples" directory in the path in $ORACLE_HOME/network/admin and here is the contents of listener.ora in that folder.. All commented out..

                              (Here is the $ORACLE_HOME path /home/oracle/ebs/apps/tech_st/10.1.2/network/admin)


                              # copyright (c) 1997 by the Oracle Corporation
                              #
                              # NAME
                              # listener.ora
                              # FUNCTION
                              # Network Listener startup parameter file example
                              # NOTES
                              # This file contains all the parameters for listener.ora,
                              # and could be used to configure the listener by uncommenting
                              # and changing values. Multiple listeners can be configured
                              # in one listener.ora, so listener.ora parameters take the form
                              # of SID_LIST_<lsnr>, where <lsnr> is the name of the listener
                              # this parameter refers to. All parameters and values are
                              # case-insensitive.

                              # <lsnr>
                              # This parameter specifies both the name of the listener, and
                              # it listening address(es). Other parameters for this listener
                              # us this name in place of <lsnr>. When not specified,
                              # the name for <lsnr> defaults to "LISTENER", with the default
                              # address value as shown below.
                              #
                              # LISTENER =
                              # (ADDRESS_LIST=
                              #     (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))
                              #     (ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))     

                              # SID_LIST_<lsnr>
                              # List of services the listener knows about and can connect
                              # clients to. There is no default. See the Net8 Administrator's
                              # Guide for more information.
                              #
                              # SID_LIST_LISTENER=
                              # (SID_LIST=
                              #     (SID_DESC=
                              #               #BEQUEATH CONFIG
                              # (GLOBAL_DBNAME=salesdb.mycompany)
                              # (SID_NAME=sid1)               
                              # (ORACLE_HOME=/private/app/oracle/product/8.0.3)
                              #               #PRESPAWN CONFIG
                              # (PRESPAWN_MAX=20)
                              #     (PRESPAWN_LIST=
                              # (PRESPAWN_DESC=(PROTOCOL=tcp)(POOL_SIZE=2)(TIMEOUT=1))
                              # )
                              # )
                              # )
                                   
                              # PASSWORDS_<lsnr>
                              # Specifies a password to authenticate stopping the listener.
                              # Both encrypted and plain-text values can be set. Encrypted passwords
                              # can be set and stored using lsnrctl.
                              # LSNRCTL> change_password
                              # Will prompt for old and new passwords, and use encryption both
                              # to match the old password and to set the new one.
                              # LSNRCTL> set password
                              #     Will prompt for the new password, for authentication with
                              # the listener. The password must be set before running the next
                              # command.
                              # LSNRCTL> save_config
                              # Will save the changed password to listener.ora. These last two
                              # steps are not necessary if SAVE_CONFIG_ON_STOP_<lsnr> is ON.
                              # See below.
                              #
                              # Default: NONE
                              #
                              # PASSWORDS_LISTENER = 20A22647832FB454 # "foobar"

                              # SAVE_CONFIG_ON_STOP_<lsnr>
                              # Tells the listener to save configuration changes to listener.ora when
                              # it shuts down. Changed parameter values will be written to the file,
                              # while preserving formatting and comments.
                              # Default: OFF
                              # Values: ON/OFF
                              #
                              # SAVE_CONFIG_ON_STOP_LISTENER = ON

                              # USE_PLUG_AND_PLAY_<lsnr>
                              # Tells the listener to contact an Onames server and register itself
                              # and its services with Onames.
                              # Values: ON/OFF
                              # Default: OFF
                              #
                              # USE_PLUG_AND_PLAY_LISTENER = ON

                              # LOG_FILE_<lsnr>
                              # Sets the name of the listener's log file. The .log extension
                              # is added automatically.
                              # Default=<lsnr>
                              #
                              # LOG_FILE_LISTENER = lsnr

                              # LOG_DIRECTORY_<lsnr>
                              # Sets the directory for the listener's log file.
                              # Default: <oracle_home>/network/log
                              #
                              # LOG_DIRECTORY_LISTENER = /private/app/oracle/product/8.0.3/network/log

                              # TRACE_LEVEL_<lsnr>
                              # Specifies desired tracing level.
                              # Default: OFF
                              # Values: OFF/USER/ADMIN/SUPPORT/0-16
                              #
                              # TRACE_LEVEL_LISTENER = SUPPORT

                              # TRACE_FILE_<lsnr>
                              # Sets the name of the listener's trace file. The .trc extension
                              # is added automatically.
                              # Default: <lsnr>
                              #
                              # TRACE_FILE_LISTENER = lsnr

                              # TRACE_DIRECTORY_<lsnr>
                              # Sets the directory for the listener's trace file.
                              # Default: <oracle_home>/network/trace
                              #
                              # TRACE_DIRECTORY_LISTENER=/private/app/oracle/product/8.0.3/network/trace
                              # CONNECT_TIMEOUT_<lsnr>
                              # Sets the number of seconds that the listener waits to get a
                              # valid database query after it has been started.
                              # Default: 10
                              #
                              # CONNECT_TIMEOUT_LISTENER=10

                              Edited by: user978419 on Apr 17, 2012 9:29 AM
                              • 12. Re: Failing in R12 Post install steps
                                Hussein Sawwan-Oracle
                                If the <CONTEXT_NAME> directory is missing then this indicates that the directory/files were not created by Rapid Install and you need to do the installation all over again.

                                Thanks,
                                Hussein
                                • 13. Re: Failing in R12 Post install steps
                                  930979
                                  OK. I will do that.Can you please clarify/confirm these

                                  Should I delete all the folders in /home/oracle/ebs where I installed Oracle?
                                  Anything else I need to take care before I start fresh install?

                                  Thanks a lot for your assistance and help in this regards.
                                  • 14. Re: Failing in R12 Post install steps
                                    Hussein Sawwan-Oracle
                                    OK. I will do that.Can you please clarify/confirm these

                                    Should I delete all the folders in /home/oracle/ebs where I installed Oracle?
                                    Anything else I need to take care before I start fresh install?
                                    Yes -- 11i: How To Clean Up The UNIX Environment After EBS 11i Install Fails [ID 110372.1]

                                    Thanks,
                                    Hussein
                                    1 2 3 Previous Next