You shloud provide more information:
What server you use?
You have only internal disks or have some extrenal disks ?
What type of external storage ?
Some information can provide output of following commands:
Current configuration don't use and hardware based RAID ( M4000 don't support it).
You have two disk : c0t0d0 ; c0t1d0
Slices of him is mirrored via Solaris Volume Manager.
You have disk c1t0d1 that mot mirrored.
It' look more like external disk ( RAID). It's not clear for me reson use this disk under SVM.
Show how this devices used:
For check status of this device:
At this moment i can't see any direct problems, but some things stange for me.
1. Genraly, for /tmp use swap, not dedicated slice.
2. Configuration look like yu have external raid without multi-pathing. You should separate check raid-level and status of this device.
On this Raid configured 2 volumes:
c1t0d1 under SVM control:
/dev/md/dsk/d43 516362641 366533931 144665084 72% /orauml
/dev/md/dsk/d44 309814307 121299176 185416988 40% /appluml
c1t0d0 without SVM control:
/dev/dsk/c1t0d0s6 287078011 139064498 145142733 49% /backup
It's possible, but strange.
Also check status and configuration of MetaDB ( metadb )
I could not understand , what you mean , Please give me more detail about my server configuration, As I am not
solaris admin, but I have to see what is configured in server because no admin is here.
flags first blk block count
a m p luo 16 8192 /dev/dsk/c0t0d0s7
a p luo 8208 8192 /dev/dsk/c0t0d0s7
a p luo 16 8192 /dev/dsk/c0t1d0s7
a p luo 8208 8192 /dev/dsk/c0t1d0s7
I understand one thing that we have mirroring and we have seven hard disks, But I need also commands
which can give me total output of my hard disk size and how many processes are used with how much capacity.