I am a beginner in tape a backup solutions.
I have installed osb 10.4. My library is Dell™ PowerVault™ 114x
If i try configured Lib and tape with sg_map -i -x
[root@bosmgmt ~]# sg_map -i -x
/dev/sg0 0 0 0 0 0 ATA WDC WD5003ABYX-1 1S02
/dev/sg1 0 0 1 0 0 ATA WDC WD5003ABYX-1 1S02
/dev/sg2 0 1 0 0 0 /dev/sda Dell VIRTUAL DISK 1028
/dev/sg3 4 0 0 0 5 /dev/scd0 TSSTcorp DVD+-RW TS-L633J D250
/dev/sg4 1 0 1 0 1 /dev/nst0 IBM ULTRIUM-HH4 B6W1
-- Tape is recongnized by osb : /dev/sg4 1 0 1 0 1 /dev/nst0 IBM ULTRIUM-HH4 B6W1
But Library not.
I found in matrix of compability in this link
and Dell™ PowerVault™ 114x is not.
Could i install driver or modify file for osb recognize this library??
Thanks in advance
Looking at the Dell website I would say that this unit is not a tape autoloader or library, it is just an enclosure that holds up to two drives. From our sg output I would say you have a single drive and that is what is being seen by the OS (and therefore OSB). I don't think there is any other mechanics to automatically load/unload tapes from the drive, so it is effectively a standalone drive.