1 Reply Latest reply: Aug 3, 2012 5:13 PM by safarmer RSS

    Jcop card Release and Speed

    62351
      Dear Sirs,


      I bought some cards at the internet and the supplier tells they are NXP JA080, Jcop 2.4.1. I need to know which release and if possible the chip speed.

      I need a Jcop 2.4.1 card Release 3 with 60Mhz chip but I don't know, neither the supplier, if this card I bought have these configurations. Is there a GPShell command or APDU which I can use to get these informations ?


      Thank you in advance,
      Fabio Vaz.
        • 1. Re: Jcop card Release and Speed
          safarmer
          This is not information that is readily available from the card. You could try the /identify command (if you have JCOP tools). It will at least give you a mask number for the JCOP platform. The clock speed is something that is not generally exposed.

          I think you will need to contact NXP or your card supplier to get the product sheet to see what micro-controller they have. I have come across data sheets for different NXP micro-controllers online but nothing that says which one is in the J3A080. The only other documentation I have seen in the past was only available under NDA.

          - Shane