1 Reply Latest reply: Sep 11, 2012 2:18 PM by rdoogan RSS

    Error: unable to open qlm connection - multiple configured device attachmen

    941982
      Ran this command "lsvol --drive raid_0n" one day.
      Worked.


      Following day output was.
      Error: unable to open qlm connection - multiple configured device attachments exist

      The following is listing od devices.
      Any ideas?
      lsdev -l
      raid_0n_2:
      Device type: tape
      Model: Ultrium 5-SCSI
      Serial number: HU1130HJ12
      In service: no
      Automount: yes
      Query frequency: [undetermined]
      Debug mode: no
      Blocking factor: (default)
      Max blocking factor: (default)
      UUID: e2714954-be61-102f-a081-9b963650cb32
      Attachment 1:
      Host: raid
      Raw device: /dev/rmt/0o
      raid_c4t500143801604051Cd0:
      Device type: library
      Model: MSL
      Serial number: 1135BRZ048
      In service: yes
      Debug mode: no
      Barcode reader: default (hardware-selected)
      Barcodes required: no
      Auto clean: no
      Clean interval: (not set)
      Clean using emptiest: no
      Unload required: yes
      Ejection type: auto
      Min writable volumes: 0
      UUID: 948d7ec8-bd04-102f-a12a-e47c91d2ca8e
      Attachment 1:
      Host: raid
      Raw device: /dev/scsi/changer/c4t500143801604051Cd0
      raid_0n:
      Device type: tape
      Model: Ultrium
      Serial number: HU1130HJ12
      In service: yes
      Library: raid_c4t500143801604051Cd0
      DTE: 1
      Automount: yes
      Error rate: 8
      Query frequency: [undetermined]
      Debug mode: no
      Blocking factor: (default)
      Max blocking factor: (default)
      Current tape: [unknown]
      Use list: all
      Drive usage: 38 minutes, 2 seconds
      Cleaning required: no
      UUID: 948e249a-bd04-102f-a12a-e47c91d2ca8e
      Attachment 1:
      Host: raid
      Raw device: /dev/rmt/0n
      raid_c4t500143801604051Cd0_2:
      Device type: library
      Model: MSL G3 Series
      Serial number: 1135BRZ048
      In service: no
      Debug mode: no
      Barcode reader: default (hardware-selected)
      Barcodes required: no
      Auto clean: no
      Clean interval: (not set)
      Clean using emptiest: no
      Ejection type: ??
      Min writable volumes: 0
      UUID: e2710c82-be61-102f-a081-9b963650cb32
      Attachment 1:
      Host: raid
      Raw device: /dev/scsi/changer/c4t500143801604051Cd0
      sasl48-lib:
      Device type: library
      Model: [none]
      Serial number: 1135BRZ048
      In service: no
      Debug mode: no
      Barcode reader: default (hardware-selected)
      Barcodes required: no
      Auto clean: no
      Clean interval: (not set)
      Clean using emptiest: no
      Unload required: yes
      Ejection type: auto
      Min writable volumes: 0
      UUID: ea045e60-bcd4-102f-a12a-e47c91d2ca8e
      Attachment 1:
      Host: denver
      Raw device: /dev/obl0
      ST lun: 1
      sasl48-tape:
      Device type: tape
      Model: [none]
      Serial number: HU1130HJ12
      In service: no
      Library: sasl48-lib
      DTE: 1
      Automount: yes
      Error rate: 8
      Query frequency: [undetermined]
      Debug mode: no
      Blocking factor: (default)
      Max blocking factor: (default)
      Current tape: [unknown]
      Use list: all
      Drive usage: 30 seconds
      Cleaning required: no
      UUID: 9dbdc2de-bcd5-102f-a12a-e47c91d2ca8e
      Attachment 1:
      Host: denver
      Raw device: /dev/obt0
      ST lun: 0
      ob>