This content has been marked as final. Show 3 replies
Physically plumb in network cables to spare ports in the Physical server which are connected to the new subnet.
Then create a new vswitch on the control domain and then assign as a new vnic to the ldom.
The Conrtrol Domain will usually have 4 onboard ports. If they are already allocated then install a network card in one of the spare slots.
The technology "vlan tagging" allows you to use multiple subnets on the same physical port and cable.
Your network environment needs to support this.
To use this technology with ldom use
ldm add-vnet vid=<number> ...