We are using a T4 attached to a 2530-M2 Disk Array.
We are not supporting the Web Based Cam application. So we need to use only CLI.
Currently I am preparing a document for Disk Replacement of the Disk Array via CLI.
- What are all the states and statuses of a DISK. A healthy and a faulted one's comparison output sample will be of great help.
- Suppose a disk has reported a 'predictive failure' alarm, how do we check it on CLI (my guess from sscs list alarm). I need a sample output of this too.
Any other inputs or details that can help me are most welcomed !!!
I would suggest you to install CAM on a test server and use the Online Help just to create your document. This Online Help is the main documentation which will provide you with the information you need, see below.
The state of the disk:
The status of the disk:
Otherwise, please load the document " [Sun Storage Common Array Manager Array Administration Guide, Version 6.9.0|http://docs.oracle.com/cd/E24008_01/pdf/E24011.pdf] " and look at the table 4-40 page 184.
In regards to the PFA alarm, please see the other thread Re: Disk Array 2530-M2 disk replacement procedure via CLI where I've put the details.