9 Replies Latest reply: Oct 8, 2012 6:42 AM by 966549 RSS

    Applying patch

    966549
      I have installed Oracle 10.2.0.1 on SLES 10, Can I apply the 10.2.0.4 patch directly on it ?? Or I have to apply the 10.2.0.2 patch first ??
        • 1. Re: Applying patch
          Srini Chavali-Oracle
          You can directly apply 10.2.0.4 on top of 10.2.0.1 - these patch sets are cumulative - pl check the README of patch 10.2.0.4

          HTH
          Srini
          • 2. Re: Applying patch
            Veeresh.S
            Yes, you can.

            ref : http://www.oracleflash.com/29/Upgrade-Oracle-10g-Release-2-from-10201-to-10204.html
            • 3. Re: Applying patch
              966549
              Srini Chavali wrote:
              You can directly apply 10.2.0.4 on top of 10.2.0.1 - these patch sets are cumulative - pl check the README of patch 10.2.0.4

              HTH
              Srini
              I did the same thing .. but at 80% it got stucked and it didnt move further. And below is the log I found.

              Using paramFile: /usr/local/Oracle10204_x86_64_Patch/install/oraparam.ini


              Checking installer requirements...

              Checking operating system version: must be redhat-3, SuSE-9, SuSE-10, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1, asianux-2 or asianux-3
              Passed


              All installer requirements met.

              Checking Temp space: must be greater than 80 MB. Actual 5923 MB Passed
              Checking swap space: 0 MB available, 150 MB required. Failed <<<<
              Checking monitor: must be configured to display at least 256 colors Failed <<<<
              >>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set.

              Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n]
              The commandline for unzip:
              /usr/local/Oracle10204_x86_64_Patch/install/unzip -qqqo ../stage/Components/oracle.swd.jre/1.4.2.14.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-10-05_02-46-21PM
              The commandline for unzip:
              /usr/local/Oracle10204_x86_64_Patch/install/unzip -qqqo ../stage/Components/oracle.swd.oui/10.2.0.4.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-10-05_02-46-21PM
              The commandline for unzip:
              /usr/local/Oracle10204_x86_64_Patch/install/unzip -qqqo ../stage/Components/oracle.swd.oui.core/10.2.0.4.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-10-05_02-46-21PM

              The number of files bootstrapped for the jre is 613.

              The number of files bootstrapped for the oui is 66.
              No umask is available from oraparam.ini. Using the default value '007'.

              Execvp of the child jre : the cmdline is /tmp/OraInstall2012-10-05_02-46-21PM/jre/1.4.2/bin/java, and the argv is
              /tmp/OraInstall2012-10-05_02-46-21PM/jre/1.4.2/bin/java
              -Doracle.installer.library_loc=/tmp/OraInstall2012-10-05_02-46-21PM/oui/lib/linux
              -Doracle.installer.oui_loc=/tmp/OraInstall2012-10-05_02-46-21PM/oui
              -Doracle.installer.bootstrap=TRUE
              -Doracle.installer.startup_location=/usr/local/Oracle10204_x86_64_Patch/install
              -Doracle.installer.jre_loc=/tmp/OraInstall2012-10-05_02-46-21PM/jre/1.4.2
              -Doracle.installer.nlsEnabled="TRUE"
              -Doracle.installer.prereqConfigLoc=/tmp/OraInstall2012-10-05_02-46-21PM/prereq
              -Doracle.installer.unixVersion=2.6.18-028stab089.1
              -mx150m
              -cp
              /tmp/OraInstall2012-10-05_02-46-21PM:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/oneclick.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/srvm.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/share.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/xml.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/emCfg.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstImages.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/help4.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/ewt3.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/swingaccess.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/classes12.jar::/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/jewt4.jar:/tmp/OraInstall2012-10-05_02-46-21PM/oui/jlib/jewt4-nls.jar
              oracle.sysman.oii.oiic.OiicInstaller
              -scratchPath
              /tmp/OraInstall2012-10-05_02-46-21PM
              -sourceLoc
              /usr/local/Oracle10204_x86_64_Patch/install/../stage/products.xml
              -sourceType
              network
              -timestamp
              2012-10-05_02-46-21PM
              INFO: Environment Variables:

              INFO: ORACLE_HOME = /user/oracle/OraHome

              INFO: PATH = /usr/bin:/usr/ccs/bin:/usr/bin:/usr/ccs/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:/opt/oracle/product/10.2/db_1/bin:.:/user/oracle/OraHome/bin:/usr/java/jre1.6.0_14/bin:/usr/local/Oracle10204_x86_64_Patch//install:/usr/local/Oracle10204_x86_64_Patch/install

              INFO: CLASSPATH =

              INFO: Username:oracle

              INFO: Install area Control created with access level 1

              INFO: Oracle Universal Installer version is 10.2.0.4.0

              INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to '/tmp/OraInstall2012-10-05_02-46-21PM/prereq'. Received the value from variable association.
              INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
              INFO:
              *** Welcome Page***
              INFO: Initializing install inventory
              INFO: Setting up install inventory
              INFO:
              *** Specify Source Location Page***
              INFO: Initializing OUI Shiphome access setup
              SEVERE: OUI-10133:Invalid staging area. There are no top level components for Linux available for installation in this staging area.
              INFO: User Selected: Yes/OK

              INFO: Performing operation for OUI Shiphome access setup
              INFO: Setting up install inventory
              INFO: Initializing install inventory
              INFO: Setting up install inventory
              INFO:
              *** Specify Source Location Page***
              INFO: Initializing OUI Shiphome access setup
              INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
              INFO: Performing operation for OUI Shiphome access setup
              INFO:
              *** Select a Product to Install Page***
              INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.server, 10.2.0.1.0, >0.0.0.0.0, [ 46 ][OH:2]'. Received the value from the default settings.
              INFO:
              *** Select Installation Type Page***
              INFO: Setting the 'InstallType ( DEP_MODE )' property to 'EE'. Received the value from the UI page.
              INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'EE'. Received the value from the UI page.
              INFO: The selected install type is "EE_ALL".
              INFO:
              *** Specify Home Details Page***
              INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to '/user/oracle/OraHome'. Received the value from the UI page.
              INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraDb10g_home1'. Received the value from the UI page.
              INFO: Initializing OUI Oracle Home access setup
              INFO: Setting variable 'ORACLE_HOME' to '/user/oracle/OraHome'. Received the value from the UI page.
              INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
              WARNING: Do you really want to exit?
              INFO: User Selected: Yes/OK
              • 4. Re: Applying patch
                Veeresh.S
                Checking swap space: 0 MB available, 150 MB required. Failed <<<<
                increase your swap space
                Checking monitor: must be configured to display at least 256 colors Failed <<<<
                Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set.
                As oracle user try

                export DISPLAY=<ipaddress or hostname>:0.0
                echo $DISPLAY
                $>xclock
                $> ./runInstaller

                --
                The above errors might also occur if rpm are not installed.
                Ref : http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml#Oracle10gLinuxErrorsAndProblems
                • 5. Re: Applying patch
                  966549
                  I am installing in a virtual environment. So no need of swap here. Also installed 10.2.0.1 with the same both swap and display error(used x manager) and it was success.

                  But during patch it just hanged with 80%.


                  and on xscreen its giving the error:

                  Warning: String to TranslationTable conversion encountered errors
                  Warning: translation table syntax error: Unknown keysym name: osfPrimaryPaste
                  Warning: ... found while parsing ':m <Key>osfPrimaryPaste:cut-primary()'
                  Warning: String to TranslationTable conversion encountered errors
                  Warning: translation table syntax error: Unknown keysym name: osfActivate
                  Warning: ... found while parsing ':<Key>osfActivate: PrimitiveParentActivate()'

                  Edited by: 963546 on Oct 5, 2012 10:24 PM

                  Edited by: 963546 on Oct 5, 2012 10:26 PM
                  • 6. Re: Applying patch
                    Veeresh.S
                    try this :

                         $ locate XKeysymDB
                         /usr/share/X11/XKeysymDB

                         $ cd /usr/X11R6/lib
                         $ ln -s /usr/share/X11

                    (this will create a soft link named X11 that points to the
                                             actual X11 directory within /usr/share)

                    make sure you have met all prerequisite before proceeding upgrade, Following readme correctly is enough to complete the upgrade task successfully.
                    • 7. Re: Applying patch
                      966549
                      It says file exists. Its not an X11 error certainly, as the OUI is emulated and after clicking next in case of patch it stops at 80%.

                      Actually after immediate installation of 10.2.0.1 , I tried to apply patch. I have not created a DB yet. Will this be an issue , as the link you provided in 1st post , says to stop all before patching. BUt in my case I have not created , so nothing to stop.

                      Edited by: 963546 on Oct 5, 2012 11:17 PM
                      • 8. Re: Applying patch
                        Srini Chavali-Oracle
                        963546 wrote:
                        I am installing in a virtual environment. So no need of swap here. Also installed 10.2.0.1 with the same both swap and display error(used x manager) and it was success.
                        Pl post host and guest OS details. A virtual machine requires swap just like a physical machine does. You will need to fix this error - you got lucky the first time.
                        But during patch it just hanged with 80%.
                        Pl follow all of the steps in the README of the 10.2.0.4 patch.

                        >
                        and on xscreen its giving the error:

                        Warning: String to TranslationTable conversion encountered errors
                        Warning: translation table syntax error: Unknown keysym name: osfPrimaryPaste
                        Warning: ... found while parsing ':m <Key>osfPrimaryPaste:cut-primary()'
                        Warning: String to TranslationTable conversion encountered errors
                        Warning: translation table syntax error: Unknown keysym name: osfActivate
                        Warning: ... found while parsing ':<Key>osfActivate: PrimitiveParentActivate()'

                        Edited by: 963546 on Oct 5, 2012 10:24 PM

                        Edited by: 963546 on Oct 5, 2012 10:26 PM
                        HTH
                        Srini
                        • 9. Re: Applying patch
                          966549
                          Dear Srini and Veeresh,thanks to all.

                          This issue is solved. The patch copied was corrupted, I copied the patch folder again and the patching is finished without any error.

                          Now I have to create DB using DBCA.