This content has been marked as final. Show 2 replies
Hi guys, I have noticed the communication between machines is not so good as before !
Check this out :
64 bytes from ballistic (192.168.216.33): icmp_seq=2 ttl=64 time=46.8 ms
These machines are on the same network swtich, it should be less than 1 ms or equal ! Anyway, I don´t know why the memory maintenance has to do with communication problem, My weblogic cluster is UNICAST , i would like to know if there is some configuration issue missed over here !
The machine with 8GB ram was faster, but for 16 GB maintenance it was necessary reboot !
Have you guys some clue about it ?
Thanks in advance
I don´t know why the memory maintenance has to do with communication problemI don't think this has anything to do with the memory maintenance... probably some network parameters got changed after the reboot... I suggest you firstly reboot the host again to see if anything changes... Then, set it back to 8GB, and test it again... It's unlikely your faster startup will come back... But at least you'll know it's not the memory...