We are trying to set up a RAC blade server in which they are 2nodes and runs under Linux x86-64 machine. We will be installing 22.214.171.124. The ASM disk has been created and we are in stage of installtion of GRID software. During the GUI installation we are getting below error.
INS-06003: Failed to setup passwordless SSH connectivity with the following
The SSH are working fine when we do manually. But through GUI during installtion it is not. The port which we are using here for connectivity is 2222 instead of the default ports. As per the one of thread in OTN discussion I checked port specification of /etc/ssh/ssh_config file in both the servers. It is 2222. I couldnt find out any other proper suggestion or solution from anywhere. Kindly help me out.
I had a same issue. I was receiving SSH connectivity is ok during grid ssh setup, but when I pressed test or next I got INS-06003 or INS-06006. In my case 2nd node could connect to 1st, but 1st couldn't. I solved it by manually configuring ssh. Execute on both nodes:
rm -rf .ssh/
chmod 700 ~/.ssh
ssh-keygen -t rsa
Then copy keys from one node to another:
Edited by: nnarimanov on Nov 20, 2012 10:30 PM