In AD there is an OU called BIUsers holding a group BIusers. Refer following link: http://imageshare.web.id/images/cvxpbmhs64pmg7d7p2nd.jpg
The Group BIusers holds three members (users) from different OU. I have to import the three users in to BI console.
I was able to import the group using DN: OU=BIUsers,DC=CORP,DC=NET
what DN should I use to import list of Users inside a group?
Kindly help me to overcome this issue.
Try to add users into your BIUsers group (click on members tab and just add required users ) and try to keep it u r users and group as flat type then
Refer the below my blog
Along the same topic, what if I only want to import users from AD groups? I don't want any users pulled in from an OU, I just want them imported when I add them to a group in AD. (Example: BIConsumers security group in AD)
Would I use something like this:
All Users Filter
User From Name Filter
Edited by: ktaber on Nov 28, 2012 7:28 AM
If you want users only from particular AD groups you should use the following setup in Weblogic:
All Users Filter: (&(memberOf=cn=BIConsumers,cn=Users,dc=lab,dc=mydomain,dc=com))
User From Name Filter: (&(cn=%u)(objectclass=user))
where BIConsumers is the group name.
Hope this helps.Let me know if it doesn't. Pls mark if it does !!
Thanks for the replies.
_ The Solution is :_
User Base DN : DC=CORP,DC=NET
All user Filter : (&(memberof=CN=BIUsers,OU=BIUsers,DC=CORP,DC=NET)(cn=*)(objectclass=user))
User from name filter : (&(cn=%u)(objectclass=user))
Can I leave these empty then if I just want to grab from that one group as previously mentioned?
Group Base DN:
All Groups Filter: (&(sAMAccountName=*)(objectclass=group))
Group From Name Filter:
* All Groups Filter had the above by default. It won't let you save it as null/empty.
In the Groups section, update the Group Base DN to reflect where you want to search for groups in Active Directory.
See this example on how its configured : http://paulcannon-bi.blogspot.com/2012/07/configuring-ldap-authentication-for.html
Hope this helps. Pls mark if it does.