This content has been marked as final. Show 4 replies
V240 platform can only support 4 local disks.1 person found this helpful
Yes, I saw the datasheet, but all eight are similar, I really coudn't differentatie.
Can any one help, what are the other disks are.
In the output from your format command and from your cfgadm command ...
Please take notice of the references to controller 3 and controller 4 ( for example c3t0d0 and c4t0d0). That suggests you have two additional SCSI cards (or one dual-ported card) installed into an expansion slot.
You need to walk up to the system and glance at its rear, else have someone that is local to that box go do it for you. I predict there will be SCSI cables attached to the rear of the system. They will lead to the storage peripheral(s) you're using for that additional capacity.
Lastly, when you have time you can go read the contents of your /var/adm/messages file. Find the timestamp for a boot event and read it line by line to see the SCSI card(s) become a recognized active device.
Yes, in this case, c3 and c4 are from storage array, each controller has 3 disks. only 2 local disks are available.
thanks to both of you.