This content has been marked as final. Show 3 replies
Hello;1 person found this helpful
I would double check to make sure I have Standby Redo Logs on the Standby system.
Also check the alert logs for LGWR errors.
Also keep in mind these two things :
It's a requirement to have the redo transport configured to LGWR SYNC AFFIRM to at least one Standby Database in order to raise the Protection Mode.
If the Data Guard Broker is used (controlled by Grid Control or DGMGRL), it won't let you increase the Protection Mode if not all requirements are met.
This note may provide some insight :
Unable To Recreate Data Guard Fast Start Failover Configuration With DGMGRL [ID 454418.1]
Edited by: mseberg on Jan 1, 2013 5:28 AM
952909 wrote:Post from primary
Hi to all;
When trying to configure maximum protection mode getting following error ,
Destination log_archive_dest_2 is synchronized
Destination log_archive_dest_1 is not serviced ny lgwr
ARC1 stared with pid= xx OS id=xxxxx
LNSB stared with pid= xx OS id=xxxxx.
destination log_archive_dest_2 is unsynchronized
LGWR: MIN of 1 applicable standby database required.
I think , PRIMARY &STANDBY configured correctly.
SQL> show parameter log_archive_dest_2
set linesize 200 set numwidth 15 column ID format 99 column "SRLs" format 99 column active format 99 col type format a4 select ds.dest_id id , ad.status , ds.database_mode db_mode , ad.archiver type , ds.recovery_mode , ds.protection_mode , ds.standby_logfile_count "SRLs" , ds.standby_logfile_active active , ds.archived_seq# from v$archive_dest_status ds , v$archive_dest ad where ds.dest_id = ad.dest_id and ad.status != 'INACTIVE' order by ds.dest_id /
Post the output for the follow script. it will check all DG configuration
(Please keep in mind you should change the spool location)
set echo off set feedback off column timecol new_value timestamp column spool_extension new_value suffix select to_char(sysdate,'Mondd_hhmi') timecol, '.out' spool_extension from sys.dual; column output new_value dbname select value || '_' output from v$parameter where name = 'db_name'; spool /tmp/dg_prim_diag_&&dbname&×tamp&&suffix set linesize 790 set pagesize 35 set trim on set trims on alter session set nls_date_format = 'MON-DD-YYYY HH24:MI:SS'; set feedback on select to_char(sysdate) time from dual; set echo on -- In the following the database_role should be primary as that is what -- this script is intended to be run on. If protection_level is different -- than protection_mode then for some reason the mode listed in -- protection_mode experienced a need to downgrade. Once the error -- condition has been corrected the protection_level should match the -- protection_mode after the next log switch. column role format a7 tru column name format a10 wrap select name,database_role role,log_mode, protection_mode,protection_level from v$database; -- ARCHIVER can be (STOPPED | STARTED | FAILED). FAILED means that the -- archiver failed to archive a log last time, but will try again within 5 -- minutes. LOG_SWITCH_WAIT The ARCHIVE LOG/CLEAR LOG/CHECKPOINT event log -- switching is waiting for. Note that if ALTER SYSTEM SWITCH LOGFILE is -- hung, but there is room in the current online redo log, then value is -- NULL column host_name format a20 tru column version format a9 tru select instance_name,host_name,version,archiver,log_switch_wait from v$instance; -- The following query give us information about catpatch. -- This way we can tell if the procedure doesn't match the image. select version, modified, status from dba_registry where comp_id = 'CATPROC'; -- Force logging is not mandatory but is recommended. Supplemental -- logging must be enabled if the standby associated with this primary is -- a logical standby. During normal operations it is acceptable for -- SWITCHOVER_STATUS to be SESSIONS ACTIVE or TO STANDBY. column force_logging format a13 tru column remote_archive format a14 tru column dataguard_broker format a16 tru select force_logging,remote_archive, supplemental_log_data_pk,supplemental_log_data_ui, switchover_status,dataguard_broker from v$database; -- This query produces a list of all archive destinations. It shows if -- they are enabled, what process is servicing that destination, if the -- destination is local or remote, and if remote what the current mount ID -- is. column destination format a35 wrap column process format a7 column archiver format a8 column ID format 99 column mid format 99 select dest_id "ID",destination,status,target, schedule,process,mountid mid from v$archive_dest order by dest_id; -- This select will give further detail on the destinations as to what -- options have been set. Register indicates whether or not the archived -- redo log is registered in the remote destination control file. set numwidth 8 column ID format 99 select dest_id "ID",archiver,transmit_mode,affirm,async_blocks async, net_timeout net_time,delay_mins delay,reopen_secs reopen, register,binding from v$archive_dest order by dest_id; -- The following select will show any errors that occured the last time -- an attempt to archive to the destination was attempted. If ERROR is -- blank and status is VALID then the archive completed correctly. column error format a55 wrap select dest_id,status,error from v$archive_dest; -- The query below will determine if any error conditions have been -- reached by querying the v$dataguard_status view (view only available in -- 9.2.0 and above): column message format a80 select message, timestamp from v$dataguard_status where severity in ('Error','Fatal') order by timestamp; -- The following query will determine the current sequence number -- and the last sequence archived. If you are remotely archiving -- using the LGWR process then the archived sequence should be one -- higher than the current sequence. If remotely archiving using the -- ARCH process then the archived sequence should be equal to the -- current sequence. The applied sequence information is updated at -- log switch time. select ads.dest_id,max(sequence#) "Current Sequence", max(log_sequence) "Last Archived" from v$archived_log al, v$archive_dest ad, v$archive_dest_status ads where ad.dest_id=al.dest_id and al.dest_id=ads.dest_id group by ads.dest_id; -- The following select will attempt to gather as much information as -- possible from the standby. SRLs are not supported with Logical Standby -- until Version 10.1. set numwidth 8 column ID format 99 column "SRLs" format 99 column Active format 99 select dest_id id,database_mode db_mode,recovery_mode, protection_mode,standby_logfile_count "SRLs", standby_logfile_active ACTIVE, archived_seq# from v$archive_dest_status; -- Query v$managed_standby to see the status of processes involved in -- the shipping redo on this system. Does not include processes needed to -- apply redo. select process,status,client_process,sequence# from v$managed_standby; -- The following query is run on the primary to see if SRL's have been -- created in preparation for switchover. select group#,sequence#,bytes from v$standby_log; -- The above SRL's should match in number and in size with the ORL's -- returned below: select group#,thread#,sequence#,bytes,archived,status from v$log; -- Non-default init parameters. set numwidth 5 column name format a30 tru column value format a48 wra select name, value from v$parameter where isdefault = 'FALSE'; spool off