This content has been marked as final. Show 12 replies
Yes, that should work.
Well, are the Linux server and your Windows computer the same machine?
Did you use the same DVD in the same Linux server before?
Is it erasable DVD media?
When I mount a DVD I usually just use e.g. "mount /dev/cdrom /cdrom" without specifying any options or file system and it usually works fine. The mount command examines the partition header and should automatically detect the files system. Can you try if this give the same error?
The windows and linux server are 2 different physical servers.
When I simply try mount /dev/cdrom /cdrom on the linux server it complains with
you must specify the filesystem type
When I try mount /dev/cdrom -t iso9660 /cdrom it complains with
wrong fs type, bad superblock on /dev/sr0 ... ( as I originally reported on my posting )
I am using a bog standard recordable DVD and I used this to install the server just a couple of days ago - stange indeed !
Checked the drive on my windows server ( where I burnt the DVD ) and on my Linux Server. Both have the same DVD formats written on them.
I burned the DVD using the native burning software of Windows 7 Professional.
I tried to mount an empty CD on my linux server and got the same error message ( reported in my earlier post ) as when trying to mount a DVD. Remember this is the same drive ( and DVD for that matter ) that I did the original Linux install from
In desperation I even tried to reinstall Linux 6-2 on my server - however the installer does not seem to fire up from the DVD drive ( even though I have checked that the BIOS has the drive at the first source in the boot order ) - this is the exact same DVD I did the original install from on this server. When I put other bootable DVD's in the drive it picks them up ok.
It is almost as if it is refusing to boot from the Linux 6-2 DVD because this is already installed on the server !
It is almost as if it is refusing to boot from the Linux 6-2 DVD because this is already installed on the server !No, that's not possible.
Something could be wrong in the burning process. I'd suggest to check the following:
Also make sure the ISO you have downloaded is not corrupted. - wasn't this a problem before?
You can compare the SHA-1 sum from the where you downloaded the file with your image file.
Btw, your problem is probably not Linux, but Windows. ;-)
I burned from the same ISO image again but this time I used a freeware burner app ( instead of Windows 7 native burner ) and just for good measure I used an external USB DVD drive instead of my internal.
Recently had my windows laptop forceably upgraded to Windows 7 in my absence, and as part of this helpful upgrade it screwed my Nero 6 install ( hence why I was using Windows 7 burner ! )
Seems to have made a difference. So it wasn't the ISO image itself but either the drive or Windows 7 - I think your appreciation of Windows may be spot on !!