This discussion is archived
3 Replies Latest reply: Jan 22, 2013 8:20 PM by 720834 RSS

Listing incident log information using WLST commands

720834 Newbie
Currently Being Moderated
Hi,
Following this page, I tried to get all the list of incident logs using listIncidents() WLST command.
Inspite of some existing incidents on the 'adr/diag/ofm....incident' directory, the command output nothing.
Could someone point me out if there is any issue with the command.

Here is the console output for WLST command run

wls:/offline> connect('weblogic', 'weblogic1', 't3://slc02jtl.us.oracle.com:7101')
Connecting to t3://slc02jtl.us.oracle.com:7101 with userid weblogic ...
Successfully connected to Admin Server 'DefaultServer' that belongs to domain 'DefaultDomain'.

Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.

wls:/DefaultDomain/serverConfig> listIncidents()
Incident Id Problem Key Incident Time


Here is the listing actual existing incidents

[vsingava@slc02jtl incident]$ pwd
/scratch/vsingava/view_storage/vsingava_CRC_Impl2/.jdev_user_home/system11.1.1.7.40.64.11/DefaultDomain/servers/DefaultServer/adr/diag/ofm/fusionapps/Configurator/incident
[vsingava@slc02jtl incident]$ ls -lrt
total 4
drwxr----- 2 vsingava dba 4096 Jan 11 08:45 incdir_1
[vsingava@slc02jtl incident]$

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points