2 Replies Latest reply: Jan 24, 2013 11:22 PM by bigdelboy RSS

    install solaris 10 u9 in T4-1, some igb can not be bought to up

    987013
      Hallo all,

      We have installed Solaris 10 update 9 in T4-1 machine. But there is some anomalies in ethernet card. When we issue command "dladm show-dev", it shows as follow:

      igb4 link: up speed: 1000 Mbps duplex: full
      igb5 link: unknown speed: 0 Mbps duplex: half
      igb6 link: unknown speed: 0 Mbps duplex: half
      igb7 link: unknown speed: 0 Mbps duplex: half
      igb0 link: up speed: 1000 Mbps duplex: full
      igb1 link: down speed: 0 Mbps duplex: half
      igb2 link: unknown speed: 0 Mbps duplex: half
      igb3 link: unknown speed: 0 Mbps duplex: half

      As you can see, there are only 2 interfaces which are up, in fact, there are 3 cables pluged in to among the 8 ethernet port. We have tried exchanging the position of the cables but there are only 3 igb which can be brought to up when the cables plugged into it, those are igb0, igb1 and igb4.
      Anyone nows why the igb2, igb3, igb5, igb6 and igb7 can not be brought to up ?

      please advice....


      regard

      Bambang