In the configuration example discussed in this guide, two floating addresses
are used to each of the WebLogic Managed Servers and to the Administration
Server. The first type of floating IP address uses the IPoIB (BOND0) interface,
and the second type of floating IP uses the EoIB (BOND1) interface.
The above are excerpts from this document: http://docs.oracle.com/cd/E18476_01/doc.220/e18479.pdf page 3-10
My question is, why do I have to use 2 floating IP's, one uses bond0 and the other uses bond1? can I just create one floating on bond1 and for all purposes, for instance? For what reasons, do I have to use 2 floating IP's?
Edited by: 943714 on Jan 29, 2013 12:01 PM
Two floating IP's should be used because on an Exalogic machine there are multiple network interfaces. As it says on that document, bond0 is for IPoIB and bond1 is EoIB.
bond1 is the interface available outside the Exalogic machine. But, for example, if you need to connect to an Exadata machine (using Weblogic with JDBC/GridLink) that must be done through InfiniBand (IPoIB - bond0 interface).
Hope this helps.