0 Replies Latest reply: Mar 18, 2013 5:55 AM by User368268 RSS

    Creation of IPMP Group failure

    User368268
      Hi All,

      I used the following commands to create the IPMP Group for 10 Gbe interfaces but it seems to fail:

      root@ebsprdb1 # ipadm create-ipmp ipmp1
      root@ebsprdb1 # ipadm create-ip net16
      root@ebsprdb1 # ipadm create-ip net33
      root@ebsprdb1 # ipadm add-ipmp -i net16 -i net33 ipmp1
      root@ebsprdb1 # ipadm create-addr -T static -a ebsprdb1-data/16 ipmp1/data1
      root@ebsprdb1 # ipadm create-addr -T static -a ebsprdb1-vsw2-test1/16 net16/test
      root@ebsprdb1 # ipadm create-addr -T static -a ebsprdb1-vsw3-test1/16 net33/test

      root@ebsprdb1 # cat /etc/hosts
      #
      # Copyright 2009 Sun Microsystems, Inc. All rights reserved.
      # Use is subject to license terms.
      #
      # Internet host table
      #
      ::1 localhost
      127.0.0.1 localhost loghost
      172.16.4.51 ebsprdb1.oocep.com ebsprdb1
      172.16.4.52 ebsprdb1-vsw0-test1.oocep.com ebsprdb1-vsw0-test1
      172.16.4.53 ebsprdb1-vsw1-test1.oocep.com ebsprdb1-vsw1-test1

      10.0.0.130 ebsprdb1-data
      10.0.0.131 ebsprdb1-vsw2-test1
      10.0.0.132 ebsprdb1-vsw3-test1

      root@ebsprdb1 # ipadm
      NAME CLASS/TYPE STATE UNDER ADDR
      ipmp0 ipmp ok -- --
      ipmp0/data1 static ok -- 172.16.4.51/24
      ipmp1 ipmp ok -- --
      ipmp1/data1 static ok -- 10.0.0.130/16
      lo0 loopback ok -- --
      lo0/v4 static ok -- 127.0.0.1/8
      lo0/v6 static ok -- ::1/128
      net14 ip ok ipmp0 --
      net14/test static ok -- 172.16.4.52/24
      net16 ip failed ipmp1 --
      net16/test static ok -- 10.0.0.131/16
      net25 ip ok -- --
      net25/v4 static ok -- 169.254.182.77/24
      net29 ip ok ipmp0 --
      net29/test static ok -- 172.16.4.53/24
      net33 ip ok ipmp1 --
      net33/test static ok -- 10.0.0.132/16

      As soon as I add the net16 device to the IPMP group, there is a failure.

      Can anyone please help?

      Regards.