This discussion is archived
0 Replies Latest reply: Mar 18, 2013 3:55 AM by User368268 RSS

Creation of IPMP Group failure

User368268 Newbie
Currently Being Moderated
Hi All,

I used the following commands to create the IPMP Group for 10 Gbe interfaces but it seems to fail:

root@ebsprdb1 # ipadm create-ipmp ipmp1
root@ebsprdb1 # ipadm create-ip net16
root@ebsprdb1 # ipadm create-ip net33
root@ebsprdb1 # ipadm add-ipmp -i net16 -i net33 ipmp1
root@ebsprdb1 # ipadm create-addr -T static -a ebsprdb1-data/16 ipmp1/data1
root@ebsprdb1 # ipadm create-addr -T static -a ebsprdb1-vsw2-test1/16 net16/test
root@ebsprdb1 # ipadm create-addr -T static -a ebsprdb1-vsw3-test1/16 net33/test

root@ebsprdb1 # cat /etc/hosts
#
# Copyright 2009 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# Internet host table
#
::1 localhost
127.0.0.1 localhost loghost
172.16.4.51 ebsprdb1.oocep.com ebsprdb1
172.16.4.52 ebsprdb1-vsw0-test1.oocep.com ebsprdb1-vsw0-test1
172.16.4.53 ebsprdb1-vsw1-test1.oocep.com ebsprdb1-vsw1-test1

10.0.0.130 ebsprdb1-data
10.0.0.131 ebsprdb1-vsw2-test1
10.0.0.132 ebsprdb1-vsw3-test1

root@ebsprdb1 # ipadm
NAME CLASS/TYPE STATE UNDER ADDR
ipmp0 ipmp ok -- --
ipmp0/data1 static ok -- 172.16.4.51/24
ipmp1 ipmp ok -- --
ipmp1/data1 static ok -- 10.0.0.130/16
lo0 loopback ok -- --
lo0/v4 static ok -- 127.0.0.1/8
lo0/v6 static ok -- ::1/128
net14 ip ok ipmp0 --
net14/test static ok -- 172.16.4.52/24
net16 ip failed ipmp1 --
net16/test static ok -- 10.0.0.131/16
net25 ip ok -- --
net25/v4 static ok -- 169.254.182.77/24
net29 ip ok ipmp0 --
net29/test static ok -- 172.16.4.53/24
net33 ip ok ipmp1 --
net33/test static ok -- 10.0.0.132/16

As soon as I add the net16 device to the IPMP group, there is a failure.

Can anyone please help?

Regards.

Legend

  • Correct Answers - 10 points
  • Helpful Answers - 5 points