cfgadm -al shows L1400 robot as type 'disk and not as 'med-changer'
Output of cfgadm -al command
c6::100000e00224083d disk connected unconfigured unknown
luxadm command also list it out as Disk. Please see below:
luxadm -e dump_map /devices/pci@8,700000/SUNW,emlxs@3/fp@0,0:devctl
Pos Port_ID Hard_Addr Port WWN Node WWN Type
0 610313 0 100000e00224083d 100000e00204083d 0x0 (Disk device)
Does anyone has clue about this or if anyone has faced this issue before?
This is not a new configuration and this setup was running fine earlier. However i noticed that sgen drivers are not running on the server now. Is is necessary to have sgen running on the server to show robot as type 'med-changer' in cfgadm.