8 Replies Latest reply: Jun 28, 2013 4:38 AM by Hemant K Chitale RSS

    problem during installation oracle 10g on linux

    26225403-4a05-4a00-9e13-271074c3d0b4

      When I try to install oracle 10g on linux, I have got the error as below.

       

       

      ./runInstaller: /oracle/cds/database/install/.oui: /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory


      Can some one resolve this issue..


      Thank you...

        • 1. Re: problem during installation oracle 10g on linux
          Dizwell

          Yes, well... we're lacking a bit of detail, don't you think?

           

          What distro are you using, for example? 32-bit? 64-bit? And are you trying to install 32-bit or 64-bit Oracle 10g?

           

          Generally, though, I've seen this error on a 64-bit operating system and you haven't installed all the proper 32-bit prerequisites needed by Oracle.

          Your best bet is to therefore go back to the documentation and make sure you've fulfilled all the prerequisites.

           

          You could try a yum install glibc.i386 to try and fix the immediate problem (though that assumes you're on a Red Hat-like O/S)

           

          You could also try visiting http://dizwell.com/downloads and grabbing a copy of Gladstone. Makes 10g and 11g 64-bit Oracle installations on a number of distros more-or-less a piece of cake.

          • 2. Re: problem during installation oracle 10g on linux
            26225403-4a05-4a00-9e13-271074c3d0b4

            tanks for the reply with helpful solution...ya I trying to install....32bit oracle 10g...

            • 3. Re: problem during installation oracle 10g on linux
              Hemant K Chitale

              10g 32bit is only certified on specific 32bit Linux platforms  (not on 64bit Linux)

               

              Hemant K Chitale

              • 5. Re: problem during installation oracle 10g on linux
                Dizwell

                Oh, come on.

                It's only supported on Red Hat, Suse and OEL too... but that hasn't stopped me (or lots of other people) installing it on CentOS, Sabayon, Ubuntu, Mint, Debian and heap of other stuff, too.

                 

                Lacking any real information from the original poster, I grant you that whether something is certified or not may be important to him, but I think he's owed the facts: a 32-bit installation on 64-bit Linux for 10g is very do-able. (Though why you'd want to cripple yourself with 10g in the first place and then compound the problem by sticking to 32-bits is a good question!)

                • 6. Re: problem during installation oracle 10g on linux
                  Abdul Moyed

                  1.1 Oracle/ Red Hat /Centos Enterprise Linux 5.8

                  1. Sr. No

                  Task to be performed

                  1

                  Identify CPU (i.e. Cabinet) for server Installation

                  2

                  Attach CD Rom to Cabinet and connect Data bus and Power Cable to CD Drive

                  3

                  Plug Monitor, Keyboard and Mouse to CPU and Power on.

                  4

                  Insert Oracle /Centos/Red Hat Enterprise Linux 5 DVD  in the DVD Rom

                  5

                  Press Del/F2 to enter setup

                  6

                  Set first boot device to CD/DVD Rom and Second boot device to HDD0

                  7

                  Press F10 to save changes and exit from setup

                  8

                  If prompted, Press any key to boot from CD

                  Note: Now Oracle/Red Hat/Centos Enterprise Linux5 installation begins.

                  9

                  Choose installation mode.

                  To Install and Upgrade in Graphic Press Enter.

                  1. 9.1

                  Check Media(CD,DVD) Before Installation Click on Test after that continue  

                  10

                  On the Welcome to Setup screen It asking to check DVD media, press OK. Note: It Take few minute.

                  11

                  Now Installation start In Graphic mode Press Next.

                  1. 11.1

                  What language would you like during installation process

                  Select English and press Next.

                  12

                  Now Select Keyboard Which You like Select US English.

                  13

                  Now Select Language Which You like during Installation 

                  Select English.

                  14

                  Enter Installation Number (key) and press Ok.

                  Note: - This step for Red hat Only.

                  15

                  Select the option from the dropdown list Remove All partition on select drive & Create Default layout. 

                  16

                  Do Not Select Encrypt System

                  Select Review and modification layout .Press Next.

                  17

                  A message box popup & ask are you sure Select YES.

                  1. 17.1

                  The appearing screen shows the hard disk size partition & allocated partition (boot, swap, /).Click on Next button. 

                  1. 17.2

                  The Next appearing screen shows the Grub Boot Loader screen. Click on Next button. 

                   

                  Network Devices

                  18

                  Now Network Devices screen open (It Shows the Lan card e.g. eth0, eth1, etc). Press edit button and set following.

                  Option

                  Action & Details

                  Select Enable IP4 support

                  Enabled

                  Choose manual configurations

                  Enabled

                  IP

                  1. 192.168.50.1 OR The IP may change as per client requirement.

                  Net mask

                  1. 255.255.255.0

                  Uncheck Enable IP6 support

                  Disabled

                  & Press OK.

                   

                  Host /Server/Machine Name Configuration

                  19

                  Now Select manually option under Host Name to Set Machine/Host/Server Name Like dbserver.

                  Note: - The Host/Machine/Server Name may change as per client requirement.

                   

                  Miscellaneous settings (Gateway & DNS Configuration)

                  20

                  Now Enter configuration details 

                  Configuration

                  Details

                  Gate Way

                  1. 192.168.50.1 OR may be change as per client

                  Primary DNS

                  1. 192.168.50.1 OR may be change as per client

                  Secondary DNS

                  1. 192.168.50.2 OR may be change as per client

                  & Press Next.

                  21

                  Set Time Zone to Asia/Kolkata and Select System clock user UTC press Next.

                  22

                  Set root passwords to Rajdeep_99 And Confirm Rajdeep_99

                  Note: - Password may be change as per requirement.

                  & Press Next.

                  23

                  To customize  the packages installation Select Option “Customize Now”

                  & Press Next.

                   

                  Package Installation

                  1. 23.1

                  Package Name Desktop Environment

                  Package

                  Selection

                  GNOME

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  KDE

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Select Next package Using Scroll Up/down key Or Mouse.

                  1. 23.2

                  Package Name Applications

                  Package

                  Selection

                  Authority & Publishing

                  No

                  Editor

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Emacs

                  No

                  Engineering & scientific

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Games & Entertainment

                  No

                  Graphic Internet

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Graphic

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Office / Productivity

                  No

                  Sound & Video

                  No

                  Text based Internet

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Select Next package Using Scroll Up/down key Or Mouse.

                  1. 23.3

                  Package Name Development

                  Package

                  Selection

                  Development Library 

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Developments Tools

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  GNOME Development Library

                  No

                  Java Development

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  KDE development

                  No

                  Legacy Soft Development 

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Ruby

                  No

                  X Soft Development

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Select Next package Using Scroll Up/down key Or Mouse.

                  1. 23.4

                  Package Name Server

                  Package

                  Selection

                  DNS Name Server

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Mail Server

                  No

                  FTP Name Server

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Legacy Network Server

                  No

                  Webserver

                  No

                  MY SQL database

                  No

                  Network Server

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  News Server

                  No

                  Postgre SQL database

                  No

                  Printer support

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Server Configuration Tools

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Web Server

                  No

                  Windows Files Server

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Select Next package Using Scroll Up/down key Or Mouse.

                  1. 23.5

                  Package Name Base System

                  Package

                  Selection

                  Administration Tools 

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Base

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Dial-up Network Support

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Java

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Legacy Soft Support

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Open fabric Enterprise Distruster

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  System Tools

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  X Windows System

                  1. Yes. Now Click on Optional package button and Select all optional packages.

                  Select Next package Using Scroll Up/down key Or Mouse.

                  1. 23.6

                  Package Name Cluster Storage

                  Package

                  Selection

                  Cluster Storage

                  1. Yes. Now Click on Optional package button and Select all optional packages.
                  2. 23.7

                  Package Name Cluster

                   

                  Package

                  Selection

                  Clustering

                  No

                  Clustering Storage

                  No

                  Select Next package Using Scroll Up/down key Or Mouse.

                  1. 23.8

                  Package Name Virtualization

                   

                  Package

                  Selection

                   

                   

                  Virtualization

                  No

                   

                  KVM /Xen

                  No

                   

                  Select Next package Using Scroll Up/down key Or Mouse.

                   

                  1. 23.9

                  Package Name Language

                   

                  Package

                  Selection

                  Language

                  No To ALL

                   

                   

                  & Press Next. (It Takes 1 Or 2 minute ) It checks for dependency package.

                  24

                  Now Press & It will Install selected Packages

                  Note: It takes 30 to 40 minute.

                   

                  25

                  After Completion package Installation Press reboot Button.  

                   

                  26

                  Now Eject DVD from DVD ROM.

                   

                   

                  Problem to load ORACLE /REH/CETOS/ EL5

                   

                  27

                  If After Restart U have problem to load REHEL5 and your Server machine Hang then again restart & press(hold) I continually

                  Manually start services press No to cpuspeed process & Yes to remaining all process.

                  Note: - After installation disable cpuspeed process using setup command.

                   

                  28

                  After restart Press Forward button.

                   

                  29

                  Now Red hat ask for License Agreements Select ‘Yes, I agree to license agreement’ & Press Forward Button

                   

                   

                  Firewall Configuration

                   

                  30

                  Now It show Firewall Configuration Screen

                   

                  Services

                  Action(Trusted Or Not)

                  SSH

                  Yes

                  FTP

                  No

                  Samba

                  Yes

                  Nfs4

                  No

                  Secure WWW(https)

                  Yes

                  Mail (smtp)

                  No

                  Telnet

                  Yes

                  WWW(http)

                  Yes

                  1. 30.1

                  Add New port

                   

                  Port No

                  Port Type

                  Use For

                   

                   

                  1521

                  TCP

                  SQL Plus *

                   

                  5560

                  TCP

                  ISQL PLUS

                   

                  2901

                  TCP

                  Hamachi

                   

                  1158

                  TCP

                  Enterprise Manger

                   

                  10000

                  TCP

                  WEB MIN

                   

                  5901

                  TCP

                  VNC For root

                   

                  5902

                  TCP

                  VNC For oracle

                   

                   

                   

                   

                   

                  & Press Next.

                   

                  31

                  Now Selinux Settings make this disable & Press Forward.

                   

                  32

                  After that kdump Screen open select uncheck option & Press Forward button.

                   

                  33

                  Set Date and Time & Give Check Mark Network time Protocol Press Forward button.

                   

                  34

                  Now Select ‘No thanks I wish connect later’ & Press Forward button.

                   

                   

                  User Creation

                   

                  35

                  Create User If any

                   

                  Option

                  Value

                  User Name

                   

                  Full Name

                   

                  Password

                   

                  Conform password

                   

                  & Press Forward.

                  35

                  Sound cards Press Forward button.

                   

                  36

                  Additional Cd’s Press Finish button.

                   

                  37

                  Now Red hat show message ‘The system must now re boot for some your selection to make effective ‘Press Ok.

                   

                  38

                  After Restart login as root and ready to use.

                   

                   

                  Webmin Installation 

                   

                  39

                  Insert Utility cd Open Webmin folder and double click on webmin-1.510-1.noarch.rpm and execute.

                  OR

                  Download Webmin rpm file from http://prdownloads.sourceforge.net/webadmin/webmin-1.510-1.noarch.rpm.

                  Double Click on rpm file and execute.

                   

                  40

                  Configure Firewall Settings add port 10000 in firewall.

                   

                  41

                  Check in browser http://192.168.50.1:10000 on another machine.

                  Note:- IP may be change .

                   

                  42

                  Insert user name and password.

                   

                   

                  Oracle User Account Creation

                   

                   

                  Create a oracle user account following steps:-Open terminal run following command.

                         /usr/sbin/groupadd oinstall

                  /usr/sbin/groupadd dba

                  /usr/sbin/useradd -m -g oinstall -G dba oracle

                  Note:-For Oracle Enterprise Linux no need to create Oracle user account.

                   

                   

                  Set a passwd to oracle user:-

                              passwd oracle (set passwd ‘oracle’ & confirm the password)

                   

                   

                  VNC Server Installation For root User

                   

                  1. 43.1

                  Open terminal login as root and type vncserver start and set new password for Root as password = root123 and confirm password=root123.

                   

                  1. 44.2

                  Now Edit VNC Server file using vi or gedit /etc/sysconfig/vncservers edit as

                  VNCSERVERS="1:root 2:oracle"

                  VNCSERVERARGS[1]="-geometry 1024x764"

                  VNCSERVERARGS[2]="-geometry 1024x764"

                  and save.

                   

                  44

                  Run following command in terminal.

                  service vncserver start

                  and press enter.

                   

                  45

                  Now change directory as cd /root/.vnc/

                   

                  46

                  Edit gedit or vi editor xstartup file and uncomment two line like this

                  # Uncomment the following two lines for normal desktop:

                  unset SESSION_MANAGER

                  exec /etc/X11/xinit/xinitrc

                  and save .

                   

                  47

                  Open terminal start  services vncserver start

                   

                  48

                  Add 5901:tcp ,5902:tcp into firewall settings

                   

                   

                  VNC Server Installation For oracle User

                   

                  49

                  Log out from root  user

                   

                   

                  Log in as oracle using GUI

                   

                  50

                  Open terminal login as oracle and type vncserver start and set new password for oracle as password = oracle123 and confirm password=oracle123.

                   

                   

                  Open terminal Login as root and run following command.

                  1. 1. services vncserver stop
                  2. 2. services vncserver start

                   

                  51

                  Now change directory as cd /home/oracle/.vnc/

                   

                   

                  Edit gedit or vi editor xstartup file and uncomment line

                  # Uncomment the following two lines for normal desktop:

                  unset SESSION_MANAGER

                  exec /etc/X11/xinit/xinitrc

                  and save .

                   

                  52

                  Connect using vncviewer IP:PORT e.g.(192.168.5.1:5901)

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                   

                  Oracle11g Database scripting In Oracle/ Red hat /Centos 5

                   

                  1. Sr. No

                  Task to be performed

                  1

                  Software Requirement:-

                  Login as root in server:-

                  For installing following Packages Insert Redhat 5.5 DVD. In to DVD rom and run the following Command in terminal.

                  For Oracle Linux

                                cd /media/OEL-5.8-i386-dvd/Server

                  For Redhat  Linux

                                cd /media/RHEL-5.5-i386-dvd

                  For Centos  Linux

                                cd /media/CENTOS-5.5-i386-dvd/Centos

                   

                  Package Installation For Oracle Database

                  2

                  Then install following package

                   

                                rpm -Uvh setarch-2*                            press enter

                                rpm -Uvh make-3*                               press enter

                                rpm -Uvh glibc-2*                                press enter

                                rpm -Uvh libaio-0*                               press enter

                                rpm -Uvh compat-libstdc++-33-3*        press enter

                                rpm -Uvh compat-gcc-34-3*                 press enter

                                rpm -Uvh compat-gcc-34-c++-3*          press enter

                                rpm -Uvh gcc-4*                                  press enter

                                rpm -Uvh libXp-1*                               press enter

                                rpm -Uvh openmotif-2*                        press enter

                                rpm -Uvh compat-db-4*                       press enter

                                rpm -Uvh binutils-2.*                           press enter

                                rpm -Uvh compat-libstdc++-33-3.*       press enter

                                rpm -Uvh elfutils-libelf-*                       press enter

                                rpm -Uvh elfutils-libelf-devel-*              press enter

                                rpm -Uvh elfutils-libelf-devel-static-*      press enter

                                rpm -Uvh gcc-4.*                                 press enter

                                rpm -Uvh gcc-c++-4.*                          press enter

                                rpm -Uvh glibc-2.*                               press enter

                                rpm -Uvh glibc-common-*                    press enter

                                rpm -Uvh glibc-devel-*                         press enter

                                rpm -Uvh glibc-headers-*                     press enter

                                rpm -Uvh kernel-headers-*                   press enter

                                rpm -Uvh ksh-*                                   press enter

                                rpm -Uvh libaio-0.*                              press enter

                                rpm -Uvh libaio-devel-0.*                     press enter

                                rpm -Uvh libgcc-4.*                             press enter

                                rpm -Uvh libgomp-4.*                          press enter

                                rpm -Uvh libstdc++-4.*                        press enter

                                rpm -Uvh libstdc++-devel-4.*               press enter

                                rpm -Uvh make-3.*                              press enter

                                rpm -Uvh sysstat-7.*                            press enter

                                rpm -Uvh unixODBC-2.*                        press enter

                                rpm -Uvh unixODBC-devel-2.*               press enter

                   

                  Note:-If any package all ready install ignore same.   

                   

                  Changing Redhat Release

                  3

                  For changing redhat release run this command :-

                  echo "rhel4" > /etc/redhat-release

                   

                  Oracle User Account Creation

                  4

                  Create a oracle user account following steps:-

                         /usr/sbin/groupadd oinstall

                  /usr/sbin/groupadd dba

                  /usr/sbin/useradd -m -g oinstall -G dba oracle

                  Note :-No need create user in Oracle Enterprise Linux

                                                         

                  5

                  Set a passwd to oracle user:-

                  Type following command in terminal

                  passwd oracle

                  Changing password for user oracle.

                  New UNIX password: oracle

                  and confirm password: oracle

                   

                  Create Installation Directory

                  6

                  Create a installation path & set the permission:-

                       mkdir -p /u01/app/oracle

                  chown -R oracle:oinstall /u01

                  chmod -R 775 /u01/

                   

                  Set Kernel Parameters

                  7

                  Configure kernel parameters:-

                  In linux_scripts pre installation folder copy sysctl file to /etc directory

                   

                  1. Like.    cp sysctl .conf  /etc/

                  8

                  For activating modification :-

                            /sbin/sysctl –p run this command in to terminal

                   

                  Set Configure Shell Limits

                  9

                  Configure shell limits:-

                  1. 1. Copy limits .conf from linux_scripts  folder paste  in to /etc/security
                  2. 2. Copy login from linux_scripts  folder paste  in to /etc/pam.d/
                  3. 3. Copy profile from linux_scripts  folder paste  in to /etc/
                  4. 4. Copy csh.login from linux_scripts  folder paste  in to /etc/

                   

                  Configure hang check timer

                  10

                  Configure hang check timer :-

                     modprobe hangcheck-timer hangcheck_tick=30 hangcheck_margin=180

                  After this command copy rc.local file from Linux_Script to at /etc/rc.d/rc.local

                  1. e.g. cp rc.local /etc/rc.d/rc.local

                  After this step your oracle user created

                   

                  Set Environment Variable With Profile

                  11

                  Now login  as oracle user(Graphic mode):-

                  Note: - First you have to logout from root then.

                                          User name :-oracle

                                          Passwd      :-oracle              

                  After login oracle user you show new oracle folder created In /home directory

                  12

                  Now Copy .bashrc & .bash_profile paste at /home/oracle folder

                  1. e.g cp .bashrc /home/oracle/

                  13

                  Copy file .bashrc  and paste at /etc directory(login as Root)

                  14

                  Activate this variable  use following command:-

                              source ~/.bash_profile (login as oracle)

                   

                  Copy Database and Other Installable

                  15

                  Then Copy Linux_script and oracle11 Database setup folder to:-

                                /home/oracle/Desktop/ (oracle user login)

                                                         (This step can take several Minutes.)

                  16

                  Open Terminal login as root Give permission:-

                              chmod -R 775 /home/oracle/Desktop/database/

                   

                  Oracle Database Installation

                  17

                  Now Login as oracle in terminal and open database folder:-

                                 cd /home/oracle/Desktop/database

                  18

                  Run:- ./runInstaller file

                  Note:-Now you can see oracle setup window on your Desktop.

                  19

                  Most Important things in installation check right Installation Path:-

                  /u01/app/oracle/product/11.2.0/db_1

                  Then type database name & passwd:-

                       name:- oracle11

                       Passwd:- you can type like as ‘sys’

                       Again confirm this passwd  ‘sys’ and click ‘next’

                  20

                  After Click Next You have  show Specify inventory directory and credentials Window Click ‘next’

                  22

                  After Click Next You have Show oracle universal Installer Summary Window ‘Click ‘Install’ (this may Take Several Minutes) Then setup Install database Configuration Assistant.

                  23

                  Then setup Display password management window in this Step you can lock-Unlock & Change database user Account Default password in this step.

                  1. Ex. Sys, sysdba.

                  ‘click ok’

                  24

                  Then You will face diaglog box which wants you to execute two sh scripts (login as root open a terminal and run those following two scripts.)

                  /u01/app/oracle/orainventory/orainstRoot.sh

                      /u01/app/oracle/product/11.2.0/db_/root.sh 

                  Click ‘ok’ after run this script.

                  25

                  End of installation setup show installation path window copy this path in Desktop create new file and Click ‘exit’    

                   

                  Post Installation Configuration

                  26

                  Copy dbora file from linux_script folder to location:-

                          /etc/init.d/dbora(login as root)

                  1. e.g cp dbora  /etc/init.d/

                  27

                  Give permission to file:- chmod 755 /etc/init.d/dbora

                  28

                  Make following links as root:-

                              ln -s /etc/init.d/dbora /etc/rc3.d/S99dbora

                              ln -s /etc/init.d/dbora /etc/rc4.d/S99dbora

                              ln -s /etc/init.d/dbora /etc/rc5.d/S99dbora

                              ln -s /etc/init.d/dbora /etc/rc0.d/K10dbora

                              ln -s /etc/init.d/dbora /etc/rc6.d/K10dbora

                  30

                  Open the /etc/oratab file and change the last letter from N to Y:

                  Oracle11:/u01/app/oracle/product/11.2.0/db_1:N

                  To

                                 Oracle11:/u01/app/oracle/product/11.2.0/db_1:Y

                  31

                  Restart System and check System log.

                  32

                  Services For Database is dbora:-

                                         service dbora stop

                                         service dbora start.

                   

                   

                   

                  Hope this help full...........

                  • 7. Re: problem during installation oracle 10g on linux
                    Hemant K Chitale

                    Oracle Support Note

                    • Running 32-bit Linux x86 Oracle Database server on Linux x86-64 AMD64/EM64T (64-bit OS) is not supported .

                    Hemant K Chitale