Thanks for the Report.
Can you tell us the error message.
To configure the MTU: If your network supports jumbo frames, increase the MTU value to the required size. The MTU is set to 1500 by default, and can be between 1500 and 9000 for a 1GbE NIC, and 1500 and 64000 for a 10GbE NIC. Setting the MTU field sets the maximum transmission rate, so a packet size of 5000 can be sent and received if the MTU is set to 9000 for a 1GbE NIC.
I hope this can help you.