0 Replies Latest reply: Aug 7, 2013 5:20 PM by 1029516 RSS

    luxadm probe

    1029516

      hello, after the zoning and lun creation on the 7420, I am seeing double in luxadm output, for every LUN, it shows up 2 times, there are only 2 luns, one from each pool.  I am supposedly to see 4 disks, one standby and two active.  I am not sure why the ....d1s2 and d0s2 both showing up, I am out of idea now, also the luxadm display is not displaying any controller information.  where can I start to debug this?

       

      root@yorkt5_a:/var/adm# luxadm probe

      No Network Array enclosures found in /dev/es

       

       

      Found Fibre Channel device(s):

        Node WWN:20000024ff448f20  Device Type:Disk device

          Logical Path:/dev/rdsk/c4t21000024FF448F20d0s2

        Node WWN:20000024ff448f20  Device Type:Disk device

          Logical Path:/dev/rdsk/c4t21000024FF448F20d1s2

        Node WWN:20000024ff46656e  Device Type:Disk device

          Logical Path:/dev/rdsk/c4t21000024FF46656Ed0s2

        Node WWN:20000024ff46656e  Device Type:Disk device

          Logical Path:/dev/rdsk/c4t21000024FF46656Ed1s2

        Node WWN:20000024ff448f84  Device Type:Disk device

          Logical Path:/dev/rdsk/c5t21000024FF448F84d0s2

        Node WWN:20000024ff448f84  Device Type:Disk device

          Logical Path:/dev/rdsk/c5t21000024FF448F84d1s2

        Node WWN:20000024ff4428fc  Device Type:Disk device

          Logical Path:/dev/rdsk/c5t21000024FF4428FCd0s2

        Node WWN:20000024ff4428fc  Device Type:Disk device

          Logical Path:/dev/rdsk/c5t21000024FF4428FCd1s2

       

      really appreciate your help!