Task Audit did not provide any useful infos. Looked like all tasks were done.
The System messages did not show any warnings before the problem occurred.
I don't know if any user changed rules. But the problem already occured a few times in the past.
The problem is that there are working multiple users at the same time and if we detect the problem the CPU is already at 100% and RAM is increasing.
So it is hard to find the exact trigger for this in the logs.
But i found the following entry :
<Reportname> - Started
<Reportname> - Analyzing data
<Reportname> - Report(s) finished.
So this should be the problem or?
Another strange thing is, although i set in registry: NumConsolidationThreads=2
and the setting is successfully loaded at startup, it consumes 99% (we have 4 cores).
Shouldn't it be limited on 50% then? Or can we conclude that the reason is not a consolidations because they should be limited?
Have you narrowed down to a particular application.
Yes, always the same application
Have you waited to see what happened eventually?
yes waited several hours and looked in consolidation administration for running tasks but all task were done.
Only suspicious entry was in system messages where there was an entry "analyzing data" without "reports finished"
If you suspect rules is the issue, try loading a blank rule.
i suspect its the mentioned report, but until now the error did not occured again
Is this classic or EPMA application, migrated or newly created app?
migrated from 184.108.40.206