5 Replies Latest reply: Jun 30, 2014 6:30 AM by qwe25256 RSS

    FC SAN configuration on Solaris 11 - LUNs not visible

    1518530

      Hi,

       

      I have one T4-1 with two QLogic manufactured 2-port HBAs. I successfully installed Solaris 11 (fully updated). Single port of each HBAs is connected to NetApp SAN via Brocade FC Switch.

      >fcinfo hba-port shows the status of respective ports as online.


      The problem is i can't see any LUNs although my SAN guy told me everything correctly configured at FC switch & SAN (Zoning, igroups & LUNs mapping etc).

       

      >fcinfo remote-port -sl -p 21000024xxxxxxxxx    shows absolutely nothing.

       

      >luxadm probe says NO FC devices found.

       

      >luxadm -e port shows all 4 ports NOT CONNECTED

       

      Already installed latest version of NetApp FC Host utilities and done with provided host_config script, configured stmsboot & rebooted as well. Also tried devfsadm so many times so that it may be detected.....

       

      >cfgadm -al shows all occupants of App_Ids of Type fc-fabric as unconfigured

       

      >cfgadm -f -c configure cx for corresponding App_Ids changes nothing.

       

      This SAN is in production environment & I have already installed one logical domain inside this T4-1 which is sort of production now....

       

      Is there anything i can try to figure out where lies the problem....  or anything i have missed during configuration? I have spent around 2 days on this issue and still no progress...

       

      Thanks & Regards

       

      ------------------------------------------------------------------------------------------------