1 2 3 Previous Next 35 Replies Latest reply on May 13, 2015 11:51 AM by Maahjoor

    how to restart post installation step

    Maahjoor

      dear all,

       

      i was installing EBS R12, when i got the following page

       

      unfortunately, my laptop batery gone down and my laptop turned off.

       

      now what should i do?

      the EBS installation is done or not?

      how to reopen the above page?

       

      thank you/

        • 1. Re: how to restart post installation step
          Kj - Kiran Jadhav

          Hi,

           

          Yes, your installation is done. However it seems that issue with Login Page test.

          Please try to restart DB and application services and perform apps check test as per below note

           

          How to locate the log files and troubleshoot Rapid Install for Release 12.0.x and 12.1.x (Doc ID 452120.1)

          -->Step 5 of 5: System Check Status --> Refer : The Apps Home test runs the command

           

          Regards,

          Kiran

          1 person found this helpful
          • 2. Re: how to restart post installation step
            ;) ApPsMasTi ;)

            please see all installation log files

            Note 452120.1 : How to locate the log files and troubleshoot RapidWiz for R12

            make sure you did not encounter any installation error

             

            If AutoConfig complete successfully and you are able to access the application then I believe everything should be OK.

            please run autoconfig on both the tier

            Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12(Doc ID 387859.1)

            then check if everything is working fine or not

             

            or

             

            restart using rapidwiz -restart option (not available in 12.2 )

            See Restart the Installation, page 2-33 in Standard Installations, page 2-1

            http://docs.oracle.com/cd/B53825_03/current/acrobat/121oaig.pdf

            or

             

            Cleaning The failed installation on R12 :

                1. Shutdown all R12 processes, including the DB and verify that no more processes of this Install are active.

             

                2. Run OUI and de-install ALL products from the 10.1.2, 10.1.3 and 10.2.0 belonging to the failed R12.1.1 Installation ORACLE_HOMES from the Inventory.

             

                3. Remove the remaining R12 files for the DB- and APPS-Tier

             

             

            ApPsMaStI

            sharing is Caring

            1 person found this helpful
            • 3. Re: how to restart post installation step
              Maahjoor

              hi

              i dont have oracle support identifier, so please tell me how to reinitiate autoconfig please

               

              thanks.

              • 4. Re: how to restart post installation step
                Maahjoor

                the issue is not only with the login page, i have copy this image for you from internet.

                mine one raise 5 different problems, inlcuding JSP and http etc.

                 

                i dont have oracle support, please guide me from where and how i could reinitiate the autoconfig wizard.

                 

                thank you.

                • 5. Re: how to restart post installation step
                  Kj - Kiran Jadhav

                  Please run autoconfig as below and confirm if its getting completed successfully.

                   

                  For DB:

                  Set environment variable by executing env file $INSTALL_BASE/db/tech_st/[11.1.0 or 10.2.0]/[$SID]_[$hostname].env

                  cd $ORACLE_HOME/appsutil/scripts/$CONTEXT_NAME

                  ./adautocfg.sh

                   

                   

                  For Apps:

                  Set environment variable by executing env file $INSTALL_BASE/apps/apps_st/appl/APPL[$SID]_[$hostname].env

                  cd $ADMIN_SCRIPTS_HOME 

                  ./adautocfg.sh

                   

                  Regards,

                  Kiran

                  1 person found this helpful
                  • 6. Re: how to restart post installation step
                    Maahjoor

                    hi dear,

                     

                    i tried for DB,

                     

                    open terminal from oracle user

                    cd /u01/oracle/VIS/11.2.0/

                    ./VIS_ebs.env

                     

                    it says, Permission denied.

                     

                    how to fix please?

                     

                    thanks.

                    • 7. Re: how to restart post installation step
                      Kj - Kiran Jadhav

                      Please source the environement as below:

                       

                      . ./VIS_ebs.env

                       

                      Regards,

                      Kiran

                      1 person found this helpful
                      • 8. Re: how to restart post installation step
                        Maahjoor

                        hi,

                        i did it by changing the permission of the env file.

                        it says autoconfig completed with errors.

                         

                        where is the logfile to check?

                         

                        thanks.

                        • 9. Re: how to restart post installation step
                          Kj - Kiran Jadhav

                          Please check : [$RDBMS_ORACLE_HOME]/appsutil/log/[$CONTEXT_NAME]/[$MMDDhhmm]/adconfig.log

                          1 person found this helpful
                          • 10. Re: Re: how to restart post installation step
                            Maahjoor

                            Starting AutoConfig at Wed May 13 09:25:13 2015

                            Using adconfig.pl version 120.32

                             

                                Classpath                   : :/u01/oracle/VIS/11.2.0/jdbc/lib/ojdbc6.jar:/u01/oracle/VIS/11.2.0/appsutil/java/xmlparserv2.jar:/u01/oracle/VIS/11.2.0/appsutil/java:/u01/oracle/VIS/11.2.0/jlib/netcfg.jar:/u01/oracle/VIS/11.2.0/jlib/ldapjclnt11.jar

                             

                            ===========================================================================

                            Starting Utility to Report Version Conflicts at Wed May 13 09:25:14 GST 2015

                            Using VersionConflictListGenerator.java version 120.4

                              

                            All driver files processed.

                             

                            No version conflict encountered.

                            ===========================================================================

                             

                                Using Context file          : /u01/oracle/VIS/11.2.0/appsutil/VIS_ebs.xml

                             

                            Attempting to create a back up of the Context file

                            Created back up file of name :

                                  /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/VIS_ebs.xml

                            ===========================================================================

                            Starting synchronization of file system Context file and its templates with those in the database

                             

                               Database connection     : Failed

                               OAM Context editing support feature: Unverified

                               OAM Customization support feature  : Unverified

                             

                               File system template    : /u01/oracle/VIS/11.2.0/appsutil/template/adxdbctx.tmp

                             

                               Checking for customizations to Context template

                               Warning: Unable to connect to Database.

                                       If the system is OAM enabled, this may result in loss of customizations.

                               Looking for custom template at : /u01/oracle/VIS/11.2.0/appsutil/template/custom/adxdbctx.tmp

                               Custom template         : Not Available

                               Customizations found    : None

                                      ----------------------------------------------------------------         

                               File system Context file :/u01/oracle/VIS/11.2.0/appsutil/VIS_ebs.xml

                             

                               Checking the Context file for possible updates from the Database

                               Warning: Unable to connect to Database.

                                       If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized

                             

                            ===========================================================================

                            Starting Updates of Context file Wed May 13 09:25:15 GST 2015

                                 

                                  found context version     : 120.52.12020000.2

                                  available update version  : 120.52.12020000.2

                             

                            No updates to apply

                             

                            Ending Updates of Context file

                            ===========================================================================

                             

                            ===========================================================================

                            Config Tool CVMHelper started at Wed May 13 09:25:15 GST 2015

                            ===========================================================================

                             

                             

                            Updating local context file variables for Database Tier

                            Getting listener port from /u01/oracle/VIS/11.2.0/network/admin/VIS_ebs/listener.ora

                            New Port: 1521

                            Old Port: 1521

                            Current Listener Name: VIS

                            New Listener Name: VIS

                            New Port and existing port are the same.

                            The new listener name and existing listener name are the same.

                            No updates will be done.

                             

                            Making database connection using DBUtil

                             

                            ---------------------------------------------------------------

                                               ADX Database Utility                       

                            ---------------------------------------------------------------

                             

                            getConnectionUsingAppsJDBCConnector() -->

                                APPS_JDBC_URL='null'

                                Trying to get connection using SID based connect descriptor

                            getConnection() -->

                                sDbHost    : ebs

                                sDbDomain  : org

                                sDbPort    : 1521

                                sDbSid     : VIS

                                sDbUser    : APPS

                                Trying to connect using SID...

                            getConnectionUsingSID() -->

                                JDBC URL: jdbc:oracle:thin:@ebs.org:1521:VIS

                                Exception occurred: java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection

                                Trying to connect using SID as ServiceName

                            getConnectionUsingServiceName() -->

                                JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebs.org)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))

                                Exception occurred: java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection

                                Trying to connect using SID as ServiceName.DomainName

                            getConnectionUsingServiceName() -->

                                JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebs.org)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS.org)))

                                Exception occurred: java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection

                                Connection could not be obtained; returning null

                             

                            -------------------ADX Database Utility Finished---------------

                             

                            Exception occurred while preseeding variables in the context file: java.sql.SQLException: Could not get connection to the database

                             

                             

                            StackTrace:

                            java.sql.SQLException: Could not get connection to the database

                                at oracle.apps.ad.tools.configuration.CVMHelper.processNewContextFile(CVMHelper.java:908)

                                at oracle.apps.ad.context.CtxValueMgt.preSeed2Ctx(CtxValueMgt.java:1849)

                                at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1641)

                                at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:784)

                             

                            ===========================================================================

                            Starting Context Value Management System at Wed May 13 09:25:15 GST 2015

                            Using version 120.14

                            Options:

                             

                               Force               : no

                               Contextfile         : /u01/oracle/VIS/11.2.0/appsutil/VIS_ebs.xml

                               Templatefile        : /u01/oracle/VIS/11.2.0/appsutil/template/adxdbctx.tmp

                               ValueUpdateFile     : /u01/oracle/VIS/11.2.0/appsutil/template/adcvmdb.xml

                             

                            Verifying value management system requirements:

                               ContextFile         : VALID

                               Template File       : VALID

                               ValueUpdateFile     : VALID

                              

                            Parsing the ValueUpdateFile

                             

                            [ s_contextfile ]

                               Action             : seed

                               Change reason      : Setting the location to what has been specified by user

                               New value          : /u01/oracle/VIS/11.2.0/appsutil/VIS_ebs.xml

                             

                            [ s_adperlprg ]

                               Action             : seed

                               Change reason      : Setting the location to what has been specified by user

                               New value          : /u01/oracle/VIS/11.2.0/perl/bin/perl

                             

                            [ s_perl5lib ]

                               Action             : seed

                               Change reason      : Setting the location to what has been specified by user

                               New value          : /u01/oracle/VIS/11.2.0/perl/lib/5.10.0:/u01/oracle/VIS/11.2.0/perl/lib/site_perl/5.10.0:/u01/oracle/VIS/11.2.0/appsutil/perl

                             

                            ===========================================================================

                            [ Config tool : /u01/oracle/VIS/11.2.0/appsutil/bin/adgentns.pl ]

                               Command            : /u01/oracle/VIS/11.2.0/perl/bin/perl -I /u01/oracle/VIS/11.2.0/perl/lib/5.10.0 -I /u01/oracle/VIS/11.2.0/perl/lib/site_perl/5.10.0 -I /u01/oracle/VIS/11.2.0/appsutil/perl  /u01/oracle/VIS/11.2.0/appsutil/bin/adgentns.pl PASSWORD  contextfile=/u01/oracle/VIS/11.2.0/appsutil/VIS_ebs.xml  logdir=/u01/oracle/VIS/11.2.0/appsutil/log/VIS_ebs/05130925  outdir=/u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925

                               Action             : execute

                             

                            SCRIPT RETURNED:

                            ##########################################################################

                                               Generate Tns Names

                            ##########################################################################

                                Classpath                   : :/u01/oracle/VIS/11.2.0/jdbc/lib/ojdbc6.jar:/u01/oracle/VIS/11.2.0/appsutil/java/xmlparserv2.jar:/u01/oracle/VIS/11.2.0/appsutil/java:/u01/oracle/VIS/11.2.0/jlib/netcfg.jar:/u01/oracle/VIS/11.2.0/jlib/ldapjclnt11.jar

                             

                            Loading ORACLE_HOME environment from /u01/oracle/VIS/11.2.0

                            Logfile: /u01/oracle/VIS/11.2.0/appsutil/log/VIS_ebs/05130925/NetServiceHandler.log

                            tnsnames.ora instantiated

                             

                            *** RAC is NOT configured. Generating listener.ora from the template ad8ilsnr.ora ***

                            listener.ora instantiated

                             

                            adgentns.pl exiting with status 0

                            ERRORCODE = 0 ERRORCODE_END

                            .end std out.

                             

                            .end err out.

                             

                             

                               Result             : SUCCEEDED

                            ===========================================================================

                             

                            Ending Context Value Management System.

                            ===========================================================================

                            ===========================================================================

                            No uploading of Context file and its templates to database. Database conection failed

                            ===========================================================================

                            Updating rdbms version in Context file to db112

                            Updating rdbms type in Context file to 64 bits

                            Configuring templates from ORACLE_HOME ...

                            AutoConfig is running in the multithreaded mode.

                            Processing DriverFile = /u01/oracle/VIS/11.2.0/appsutil/template/addbtmpl.drv

                            AutoConfig Profile Phase

                            Running Instantiation Drivers for AppsUtil

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adstopdb.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adstopdb.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adstopdb.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adstopdb.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/addbccnv.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbccnv.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbccnv.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/addbccnv.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adupdlib_ux.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adupdlib.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adupdlib.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adupdlib.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adexecsql.pl

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adexecsql.pl

                               backup : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adexecsql.pl to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adexecsql.pl

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adchknls.pl

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adchknls.pl

                               backup : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adchknls.pl to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adchknls.pl

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adsvdb.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adsvdb.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adsvdb.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adsvdb.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adcrobj.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcrobj.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcrobj.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adcrobj.sql

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adstrtdb.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adstrtdb.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adstrtdb.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adstrtdb.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/txkEBSWrapper.pl

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/txkEBSWrapper.pl

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/txkEBSWrapper.pl to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/txkEBSWrapper.pl

                               setting permissions: 755

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/ad8idbux.env

                               dest   : /u01/oracle/VIS/11.2.0/VIS_ebs.env

                               backup : /u01/oracle/VIS/11.2.0/VIS_ebs.env to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/VIS_ebs.env

                               setting permissions: 644

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adsvdlsn.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adsvdlsn.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adsvdlsn.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adsvdlsn.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adsvdcnv.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adsvdcnv.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adsvdcnv.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adsvdcnv.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            File /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/txkConfigDbOcm.pl of type INSTALL_APPLY already exists, this file will not be instantiated.

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/addbprf.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbprf.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbprf.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/addbprf.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            File /u01/oracle/VIS/11.2.0/dbs/initVIS.ora of type INSTALL already exists, this file will not be instantiated.

                             

                            File /u01/oracle/VIS/11.2.0/network/admin/VIS_ebs/listener.ora of type INSTALL already exists, this file will not be instantiated.

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/afdbprf.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/afdbprf.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/afdbprf.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/afdbprf.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/addbprf.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbprf.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbprf.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/addbprf.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            File /u01/oracle/VIS/11.2.0/network/admin/VIS_ebs/tnsnames.ora of type INSTALL already exists, this file will not be instantiated.

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/config_ux.tmp

                               dest   : /u01/oracle/VIS/11.2.0/rdbms/lib/config.c

                               backup : /u01/oracle/VIS/11.2.0/rdbms/lib/config.c to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/config.c

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/afdbprf.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/afdbprf.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/afdbprf.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/afdbprf.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/txkcreateACL.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/txkcreateACL.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/txkcreateACL.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/txkcreateACL.sql

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/addbctl.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/addbctl.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/addbctl.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/addbctl.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/addlnctl.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/addlnctl.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/addlnctl.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/addlnctl.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adlsnodes_ux.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adlsnodes.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adlsnodes.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adlsnodes.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adcrobj.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcrobj.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcrobj.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adcrobj.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/addbperms.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbperms.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbperms.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/addbperms.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/txkcreateACL.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/txkcreateACL.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/txkcreateACL.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/txkcreateACL.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/txkDBSecUserAuditActionBanner_pl.tmp

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/bin/txkDBSecUserAuditActionBanner.pl

                               backup : /u01/oracle/VIS/11.2.0/appsutil/bin/txkDBSecUserAuditActionBanner.pl to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/txkDBSecUserAuditActionBanner.pl

                               setting permissions: 755

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adclobconv.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adclobconv.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adclobconv.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adclobconv.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adautocfg_ux.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adautocfg.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adautocfg.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adautocfg.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adclobtmp.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adclobtmp.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adclobtmp.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adclobtmp.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/addbupdgsm.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbupdgsm.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbupdgsm.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/addbupdgsm.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adcrdb.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcrdb.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcrdb.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adcrdb.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adlicnse.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adlicnse.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adlicnse.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adlicnse.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adpreclone.pl

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adpreclone.pl

                               backup : /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adpreclone.pl to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adpreclone.pl

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adlnkoh.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/adlnkoh.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/adlnkoh.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adlnkoh.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/afmkinit.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/afmkinit.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/afmkinit.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/afmkinit.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adcrdbrdlg.sh

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcrdbrdlg.sh

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcrdbrdlg.sh to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adcrdbrdlg.sh

                               setting permissions: 700

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adcmclean.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcmclean.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcmclean.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adcmclean.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            instantiate file:

                               source : /u01/oracle/VIS/11.2.0/appsutil/template/adcctclean.sql

                               dest   : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcctclean.sql

                               backup : /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcctclean.sql to /u01/oracle/VIS/11.2.0/appsutil/out/VIS_ebs/05130925/adcctclean.sql

                               setting permissions: 600

                               setting ownership: oracle:oinstall

                             

                            Executing script in InstantiateFile:

                            /u01/oracle/VIS/11.2.0/perl/bin/perl -I /u01/oracle/VIS/11.2.0/perl/lib/5.10.0 -I /u01/oracle/VIS/11.2.0/perl/lib/site_perl/5.10.0 -I /u01/oracle/VIS/11.2.0/appsutil/perl /u01/oracle/VIS/11.2.0/appsutil/scripts/VIS_ebs/adchknls.pl

                            script returned:

                            ****************************************************

                            ##########################################################################

                                         Validating information needed for NLS........

                            ##########################################################################

                            DATABASE version : db112

                             

                            Looking for the directory : /u01/oracle/VIS/11.2.0/nls/data/9idata

                            Directory exists

                             

                            Looking for file : /u01/oracle/VIS/11.2.0/nls/data/old/cr9idata.pl

                            File exists

                             

                            Validation complete

                            ERRORCODE = 0 ERRORCODE_END

                            .end std out.

                             

                            .end err out.

                            ****************************************************

                             

                             

                            Executing script in InstantiateFile:

                            /u01/oracle/VIS/11.2.0/perl/bin/perl -I /u01/oracle/VIS/11.2.0/perl/lib/5.10.0 -I /u01/oracle/VIS/11.2.0/perl/lib/site_perl/5.10.0 -I /u01/oracle/VIS/11.2.0/appsutil/perl /u01/oracle/VIS/11.2.0/appsutil/bin/txkDBSecUserAuditActionBanner.pl

                            script returned:

                            ****************************************************

                             

                             

                            Script Name    : txkDBSecUserAuditActionBanner.pl

                            Banner file /u01/oracle/VIS/11.2.0/appsutil/template/txkDBSecUserAuditActionBanner.txt already exists

                            Successfully Completed the script

                            ERRORCODE = 0 ERRORCODE_END

                            .end std out.

                             

                            .end err out.

                            ****************************************************

                             

                             

                            Executing script in InstantiateFile:

                            /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/afmkinit.sh

                            script returned:

                            ****************************************************

                             

                            afmkinit.sh started at Wed May 13 09:25:23 GST 2015

                             

                             

                            The environment settings are as follows ...

                             

                                   ORACLE_HOME : /u01/oracle/VIS/11.2.0

                                    ORACLE_SID : VIS

                                      TWO_TASK :

                                          PATH : /u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:.:.

                                  Library Path : /u01/oracle/VIS/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/VIS/11.2.0/lib:/usr/dt/lib:/u01/oracle/VIS/11.2.0/ctx/lib

                             

                            afmkinit.sh exiting with status 0

                             

                            .end std out.

                             

                            .end err out.

                            ****************************************************

                             

                             

                            Executing script in InstantiateFile:

                            /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/afdbprf.sh

                            script returned:

                            ****************************************************

                             

                            afdbprf.sh started at Wed May 13 09:25:24 GST 2015

                             

                             

                            The environment settings are as follows ...

                             

                                   ORACLE_HOME : /u01/oracle/VIS/11.2.0

                                    ORACLE_SID : VIS

                                          PATH : /u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:.:.

                                  Library Path : /u01/oracle/VIS/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/VIS/11.2.0/lib:/usr/dt/lib:/u01/oracle/VIS/11.2.0/ctx/lib

                             

                            Executable : /u01/oracle/VIS/11.2.0/bin/sqlplus

                             

                             

                            SQL*Plus: Release 11.2.0.3.0 Production on Wed May 13 09:25:24 2015

                             

                            Copyright (c) 1982, 2011, Oracle.  All rights reserved.

                             

                            Enter value for 1: Enter value for 2: Enter value for 3: ERROR:

                            ORA-12541: TNS:no listener

                             

                             

                            ERRORCODE = 1 ERRORCODE_END

                            .end std out.

                             

                            .end err out.

                            ****************************************************

                             

                             

                            File /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/txkConfigDbOcm.pl not instantiated in the current pass, this file will not be executed

                             

                            Executing script in InstantiateFile:

                            /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/adcrobj.sh

                            script returned:

                            ****************************************************

                             

                            adcrobj.sh started at Wed May 13 09:25:24 GST 2015

                             

                            Parameters passed are : -nopromptmsg

                             

                            The environment settings are as follows ...

                             

                                   ORACLE_HOME : /u01/oracle/VIS/11.2.0

                                    ORACLE_SID : VIS

                                      TWO_TASK :

                                          PATH : /u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:.:.

                                  Library Path : /u01/oracle/VIS/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/VIS/11.2.0/lib:/usr/dt/lib:/u01/oracle/VIS/11.2.0/ctx/lib

                             

                            SQLPLUS Executable : /u01/oracle/VIS/11.2.0/bin/sqlplus

                             

                             

                            SQL*Plus: Release 11.2.0.3.0 Production on Wed May 13 09:25:24 2015

                             

                            Copyright (c) 1982, 2011, Oracle.  All rights reserved.

                             

                            Enter value for 1: Enter value for 2: Enter value for 3: ERROR:

                            ORA-12541: TNS:no listener

                             

                             

                            adcrobj.sh exiting with status 1

                            ERRORCODE = 1 ERRORCODE_END

                            .end std out.

                             

                            .end err out.

                            ****************************************************

                             

                             

                            Executing script in InstantiateFile:

                            /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/addbperms.sh

                            script returned:

                            ****************************************************

                             

                            addbperms.sh started at Wed May 13 09:25:24 GST 2015

                             

                             

                            The environment settings are as follows ...

                             

                                   ORACLE_HOME : /u01/oracle/VIS/11.2.0

                                    ORACLE_SID : VIS

                                      TWO_TASK :

                                          PATH : /u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:.:.

                                  Library Path : /u01/oracle/VIS/11.2.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u01/oracle/VIS/11.2.0/lib:/usr/dt/lib:/u01/oracle/VIS/11.2.0/ctx/lib

                             

                            SQLPLUS Executable : /u01/oracle/VIS/11.2.0/bin/sqlplus

                             

                                Changing permissions for file sqlplus.

                                Changing permissions for file extproc.

                                Changing permissions for file tkprof.

                             

                            addbperms.sh exiting with status 0

                             

                            .end std out.

                             

                            .end err out.

                            ****************************************************

                             

                             

                            Executing script in InstantiateFile:

                            /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs/txkcreateACL.sh

                            script returned:

                            ****************************************************

                             

                            You are running txkcreateACL.sh version 120.1

                             

                             

                            The environment settings are as follows ...

                             

                                   ORACLE_HOME : /u01/oracle/VIS/11.2.0

                                    ORACLE_SID : VIS

                                          PATH : /u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/perl/bin:/u01/oracle/VIS/11.2.0/bin:/usr/bin:/usr/sbin:/u01/oracle/VIS/11.2.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin:.:.

                            Executable : /u01/oracle/VIS/11.2.0/bin/sqlplus

                             

                             

                            Executing txkcreateACL.sql ...

                             

                             

                            SQL*Plus: Release 11.2.0.3.0 Production on Wed May 13 09:25:24 2015

                             

                            Copyright (c) 1982, 2011, Oracle.  All rights reserved.

                             

                            Connected to an idle instance.

                            DECLARE

                            *

                            ERROR at line 1:

                            ORA-01034: ORACLE not available

                            Process ID: 0

                            Session ID: 0 Serial number: 0

                             

                             

                            ERROR:

                            ORA-01012: not logged on

                            Process ID: 0

                            Session ID: 0 Serial number: 0

                             

                             

                            Disconnected

                             

                            txkcreateACL.sh: exiting with status 1

                             

                             

                            .end std out.

                             

                            .end err out.

                            ****************************************************

                             

                             

                             

                            ===========================================================================

                            Starting Restore Profile utility at Wed May 13 09:25:24 GST 2015

                            Using version 120.4

                             

                             

                            ---------------------------------------------------------------

                                               ADX Database Utility                       

                            ---------------------------------------------------------------

                             

                            getConnectionUsingAppsJDBCConnector() -->

                                APPS_JDBC_URL='null'

                                Trying to get connection using SID based connect descriptor

                            getConnection() -->

                                sDbHost    : ebs

                                sDbDomain  : org

                                sDbPort    : 1521

                                sDbSid     : VIS

                                sDbUser    : APPS

                                Trying to connect using SID...

                            getConnectionUsingSID() -->

                                JDBC URL: jdbc:oracle:thin:@ebs.org:1521:VIS

                                Exception occurred: java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection

                                Trying to connect using SID as ServiceName

                            getConnectionUsingServiceName() -->

                                JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebs.org)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))

                                Exception occurred: java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection

                                Trying to connect using SID as ServiceName.DomainName

                            getConnectionUsingServiceName() -->

                                JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebs.org)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS.org)))

                                Exception occurred: java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection

                                Connection could not be obtained; returning null

                             

                            -------------------ADX Database Utility Finished---------------

                             

                                Verifying connection to the Database   : Could not be stablished

                                No Restore Profile file created.

                             

                             

                            Restore Profile utility ran successfully

                             

                            ===========================================================================

                             

                             

                            adcvmlog.xml renamed to /u01/oracle/VIS/11.2.0/appsutil/log/VIS_ebs/05130925/adcvmlog.xml.05130925

                             

                             

                            [AutoConfig Error Report]

                            The following report lists errors AutoConfig encountered during each

                            phase of its execution.  Errors are grouped by directory and phase.

                            The report format is:

                                  <filename>  <phase>  <return code where appropriate>

                             

                              [PROFILE PHASE]

                              AutoConfig could not successfully execute the following scripts:

                                Directory: /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs

                                  afdbprf.sh              INSTE8_PRF         1

                             

                              [APPLY PHASE]

                              AutoConfig could not successfully execute the following scripts:

                                Directory: /u01/oracle/VIS/11.2.0/appsutil/install/VIS_ebs

                                  adcrobj.sh              INSTE8_APPLY       1

                                  txkcreateACL.sh         INSTE8_APPLY       1

                             

                             

                            AutoConfig is exiting with status 3

                             

                            AutoConfig execution completed on Wed May 13 09:25:25 2015

                             

                            Time taken for AutoConfig execution to complete : 0 mins  12 secs

                             

                             

                            any idea please..

                             

                            Thanks you.

                            • 11. Re: Re: how to restart post installation step
                              Kj - Kiran Jadhav

                              Enter value for 1: Enter value for 2: Enter value for 3: ERROR:

                              ORA-12541: TNS:no listener

                               

                               

                              ERRORCODE = 1 ERRORCODE_END

                               

                              Please make sure your database and listener is up and running.

                              1 person found this helpful
                              • 12. Re: Re: Re: how to restart post installation step
                                Maahjoor

                                okay,

                                 

                                now it is executed successfully.

                                 

                                regarding your second suggestion, i am a bit confused.  you said

                                 

                                For Apps:

                                Set environment variable by executing env file $INSTALL_BASE/apps/apps_st/appl/APPL[$SID]_[$hostname].env

                                cd $ADMIN_SCRIPTS_HOME

                                ./adautocfg.sh

                                but in my case, i have three folder,

                                11.2.0 (which i already executed and fixed as you said in your first suggestion, my database is installed in this folder)

                                fs1

                                fs2

                                fs_ne

                                 

                                now which one of the above 3 folder i check for the Apps env file?

                                 

                                thank you

                                • 13. Re: how to restart post installation step
                                  Bashar.

                                  Hi,

                                   

                                  For the apps environment, execute the following from the location "/u01/oracle/VIS":

                                   

                                  . EBSapps.env run

                                   

                                  Regards,

                                  Bashar

                                  1 person found this helpful
                                  • 14. Re: Re: Re: how to restart post installation step
                                    Kj - Kiran Jadhav

                                    I posted it for R12.1.

                                     

                                    For R12.2:

                                    Please check EBSapps.env exist in your BASE PATH.

                                     

                                     



                                    1 person found this helpful
                                    1 2 3 Previous Next