1 2 Previous Next 24 Replies Latest reply on Aug 22, 2017 12:49 PM by Beauty_and_dBest

    emctl start dbconsole

    Beauty_and_dBest

      Hi ALL,

       

      11gR1

      OL6

       

      I was able to configure dbconsole in my database, and I was able to start it.

      Then I reboot the server then startup database and listener (which are successful).

      Then I startup my dbconsole, but now it failed

       

      [oradev2@fittrn ~]$ emctl start dbconsole

      Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

      Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.

      https://fittrn.myoracle.com:5502/em/console/aboutApplication

      Starting Oracle Enterprise Manager 11g Database Control ............................................................................................. failed.

      ------------------------------------------------------------------

      Logs are generated in directory /u02/oradev2/DEV2/11.2.0/fittrn.myoracle.com_DEV2/sysman/log

       

      I check the logs, and I found below errors:

       

      2017-08-21 15:44:51,684 Thread-2729395968 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5502): Connection refused (error = 111)

      2017-08-21 15:44:51,684 Thread-2729395968 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://fittrn.myoracle.com:5502/em/upload/: retStatus=-1

      2017-08-21 15:44:51,685 Thread-2729395968 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5502): Connection refused (error = 111)

      2017-08-21 15:44:51,685 Thread-2729395968 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://fittrn.myoracle.com:5502/em/upload/: retStatus=-1

      2017-08-21 15:44:52,510 Thread-2742785792 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5502): Connection refused (error = 111)

      2017-08-21 15:44:52,510 Thread-2742785792 ERROR command: nmejcn: failed http connection to https://fittrn.myoracle.com:5502/em/upload/: retStatus=-1

      2017-08-21 15:45:22,381 Thread-2732545792 ERROR recvlets: Recvlet AQMetrics reported invalid column pxdwngrd99_ps for DEV2 oracle_database instance_efficiency

      2017-08-21 15:45:22,381 Thread-2732545792 ERROR recvlets.aq: Failed (-1) to report clear severity on instance_efficiency.pxdwngrd99_ps [] for oracle_database DEV2

      2017-08-21 15:45:22,512 Thread-2732545792 WARN  recvlets.aq: no matching registered alert type for instance_efficiency.pxdwngrd_ps

      2017-08-21 15:45:22,512 Thread-2732545792 WARN  recvlets.aq: no matching registered alert type for instance_efficiency.pxdwngrdserial_pt

      2017-08-21 15:45:22,515 Thread-2732545792 WARN  recvlets.aq: no matching registered alert type for wait_bottlenecks.userio_wait_cnt

      2017-08-21 15:45:22,515 Thread-2732545792 WARN  recvlets.aq: no matching registered alert type for wait_bottlenecks.other_wait_cnt

      2017-08-21 16:07:56,587 Thread-2726246144 ERROR fetchlets.os: Process stderr = em_error= Invalid number of arguments passed

       

      2017-08-21 16:07:56,587 Thread-2726246144 ERROR engine: [oracle_database,DEV2,pwd_expiry] : nmeegd_GetMetricData failed : em_error= Invalid number of arguments passed

       

      2017-08-21 16:07:56,588 Thread-2726246144 WARN  collector: <nmecmc.c> Error exit. Error message: em_error= Invalid number of arguments passed

      2017-08-21 16:45:30,484 Thread-2732545792 WARN  recvlets.aq: Duplicate threshold key instance_throughput.logons_ps.  for [oracle_database DEV2]

      2017-08-21 17:00:05,483 Thread-2751239936 WARN  http: nmehl_httpListener: signaled to exit from emctl

      2017-08-21 17:00:06,484 Thread-2751239936 WARN  : Signalled to Exit Normally. Signaled to exit from emctl

      2017-08-21 19:27:57,142 Thread-2692859648 ERROR http: snmehl_allocateListenerPort: failed to listen on all sockets for hostname  and port 3938

      2017-08-21 19:27:57,143 Thread-2692859648 ERROR http: nmehl_startHttpListener: failed to listen to HTTP(s) port for https://fittrn.myoracle.com:3938/emd/main

      2017-08-21 19:27:57,143 Thread-2692859648 ERROR main: nmehl_startHttpListener failed starting http listener.

      2017-08-21 20:21:07,777 Thread-2577336064 ERROR http: snmehl_allocateListenerPort: failed to listen on all sockets for hostname  and port 3938

      2017-08-21 20:21:07,777 Thread-2577336064 ERROR http: nmehl_startHttpListener: failed to listen to HTTP(s) port for https://fittrn.myoracle.com:3938/emd/main

      2017-08-21 20:21:07,777 Thread-2577336064 ERROR main: nmehl_startHttpListener failed starting http listener.

       

      2017-08-21 15:44:49,503 Thread-2853852928 Starting Agent 10.2.0.4.2 from /u02/oradev2/DEV2/11.2.0 (00701)

      2017-08-21 15:44:49,614 Thread-2853852928 [Oracle Exadata Storage Server] InstanceProperty (MgmtIPAddr2) is marked OPTIONAL but is being used (00506)

      2017-08-21 15:44:49,774 Thread-2853852928 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used (00506)

      2017-08-21 15:44:51,683 Thread-2853852928 EMAgent started successfully (00702)

      2017-08-21 17:00:05,483 Thread-2751239936 <HTTP Listener> Agent Signaled to EXIT by emctl (00800)

      2017-08-21 17:00:06,484 Thread-2853852928 EMAgent normal shutdown (00703)

      2017-08-21 19:27:57,140 Thread-2692859648 Starting Agent 10.2.0.4.2 from /u02/oradev2/DEV2/11.2.0 (00701)

      2017-08-21 19:27:57,143 Thread-2692859648 <Agent Startup> : Startup of HTTP LISTENER failure (00716)

      2017-08-21 20:21:07,776 Thread-2577336064 Starting Agent 10.2.0.4.2 from /u02/oradev2/DEV2/11.2.0 (00701)

      2017-08-21 20:21:07,777 Thread-2577336064 <Agent Startup> : Startup of HTTP LISTENER failure (00716)

       

      unknown external name for the following patchset: Patchset: internal name: <oracle.iappserver.patchset>; external name: <UNKNOWN>; version: <10.1.2.2.0>; install time: <>; description: <>

      ) while inserting it into repository for: Information of type Host Configuration for Host fittrn.myoracle.com at 2017-08-21 15:44:55 (PHT)

      2017-08-21 15:45:51,812 [XMLLoader0 00000000012.xml] ERROR eml.XMLLoader LoadFiles.696 - Error while processing 00000000012.xml:

      java.sql.SQLException: ORA-20101: Metric PhysAddress for target type netapp_filer not configured

      ORA-06512: at "SYSMAN.ECM_CT", line 718

      ORA-06512: at line 1

      ORA-06512: at "SYSMAN.EMD_LOADER", line 4931

      ORA-06512: at line 1

              at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:73)

              at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:111)

              at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)

              at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:472)

              at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:422)

              at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1089)

              at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:200)

              at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1029)

              at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1347)

       

      2017-08-21 20:21:10,818 Thread-2242397952 ERROR http: 5: Unable to initialize ssl connection with server, aborting connection attempt

      2017-08-21 20:21:10,818 Thread-2242397952 ERROR main: nmectla_agentctl: Error connecting to https://fittrn.myoracle.com:3938/emd/main. Returning status code 1

      2017-08-21 20:21:15,889 Thread-2745521920 ERROR ssl: nzos_Handshake failed, ret=28864

      2017-08-21 20:21:15,890 Thread-2745521920 ERROR http: 6: Unable to initialize ssl connection with server, aborting connection attempt

      2017-08-21 20:21:17,920 Thread-4253734656 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5502): Connection refused (error = 111)

      2017-08-21 20:21:19,950 Thread-1765336832 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5502): Connection refused (error = 111)

      2017-08-21 20:21:21,980 Thread-975136512 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5502): Connection refused (error = 111)

       

       

      Please help....

       

       

      Kind regards,

      kc

        • 1. Re: emctl start dbconsole
          Ian Baugaard

          Hi,

           

          Are there any conflicts on those ports?

           

          $ netstat -an | grep 3938

          $ netstat -an | grep 5502

           

          Is it the only database on that host running DB console?

           

          Regards

           

          Ian

          • 2. Re: emctl start dbconsole
            dataseven

            Hello,

             

            Is firewall or iptables enabled?

             

            BEst regards,

             

             

             

            • 3. Re: emctl start dbconsole
              Beauty_and_dBest

              Thanks ALL,

               

              [root@fittrn ~]# netstat -an | grep 3938

              tcp        0      0 0.0.0.0:3938                0.0.0.0:*                   LISTEN

              [root@fittrn ~]# netstat -an | grep 5502

              none

               

              How do I know if firewall is enabled or how do I disable the firewall?  Since this is just a test server.

               

              [root@fittrn ~]#  vi /etc/sysconfig/iptables

              # Generated by iptables-save v1.4.7 on Wed Mar  4 07:31:05 2015

              *filter

              :INPUT ACCEPT [0:0]

              :FORWARD ACCEPT [0:0]

              :OUTPUT ACCEPT [2630387:139159675]

              -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT

              -A INPUT -p icmp -j ACCEPT

              -A INPUT -i lo -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 1521 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 3938 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 1158 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5500 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5501 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5502 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5503 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5504 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5505 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5900 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5901 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5902 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5903 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5904 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5905 -j ACCEPT

              -A INPUT -p tcp -m state --state NEW -m tcp --dport 5906 -j ACCEPT

              -A INPUT -j REJECT --reject-with icmp-host-prohibited

              -A FORWARD -j REJECT --reject-with icmp-host-prohibited

              COMMIT

              # Completed on Wed Mar  4 07:31:05 2015

               

              Kind regards,

              • 4. Re: emctl start dbconsole
                dataseven

                [root@rhel7 ~]# systemctl status firewalld

                firewalld.service - firewalld - dynamic firewall daemon

                  Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled)

                  Active: active (running) since Thu 2014-09-04 19:18:47 EST; 3 months 28 days ago

                Main PID: 539 (firewalld)

                  CGroup: /system.slice/firewalld.service

                  └─539 /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid

                 

                Sep 04 19:18:45 rhel7 systemd[1]: Starting firewalld - dynamic firewall daemon...

                Sep 04 19:18:47 rhel7 systemd[1]: Started firewalld - dynamic firewall daemon.

                 

                [root@rhel7 ~]# service firewalld stop

                Redirecting to /bin/systemctl stop firewalld.service

                 

                [root@rhel7 ~]# systemctl disable firewalld

                • 5. Re: emctl start dbconsole
                  Beauty_and_dBest

                  Thanks all,

                   

                  Anyways I add the ports to iptables

                   

                  But still the error persist

                   

                   

                  Please help...

                  • 6. Re: emctl start dbconsole
                    jgarry

                    You might consider having a special minimal environment for dbconsole.

                     

                    See if some bogus dbconsole got started even though it said failed (or was left up from previous try that didn't shut down): ps -efx|grep java (or yours might be ps aux)

                     

                    Check your emagent file owner and protection, it should be 755, and the owner depends on your installation.

                     

                    Check if something already has port 5502 in use; this can be confusing if you try multiple times to start dbconsole, or fail to stop.

                     

                    Check if there are error messages from it trying to start dbconsole on system startup (I've seen this on other platforms due to incompatibilities with Linux shells, perhaps you have something analogous with your system config, or even perl).

                    • 7. Re: emctl start dbconsole
                      Beauty_and_dBest

                      Hi Jgarry, and ALL,

                       

                      I have done this many times before, and it worked. Because this is a training server. I keep of installing/deinstalling database and dbconsole for next batch of students. I created minimum of 5 databases for 5 students on the same server.  Before, I can run simultaneously 5 dbconsole  for the corresponding 5  databases.

                      But now only one does startup and the others do not .

                      Each have similar error below  each port 5500, 5501, 5502, 5503 :

                      2017-08-21 20:21:21,980 Thread-975136512 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5500): Connection refused (error = 111)

                      2017-08-21 20:21:21,980 Thread-975136512 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5501): Connection refused (error = 111)

                      2017-08-21 20:21:21,980 Thread-975136512 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5502): Connection refused (error = 111)

                      2017-08-21 20:21:21,980 Thread-975136512 WARN  http: nmehl_connect_internal: connect failed to (fittrn.myoracle.com:5503): Connection refused (error = 111)

                       

                      And why it is pointing to port 3938? Do they share this port? Ho to I kill or release this port?

                       

                       

                       

                      Please help....

                       

                      Kind regards,

                      • 8. Re: emctl start dbconsole
                        dataseven

                        Did you check agabend or emdb.nohup logs? Can it be related to timezone mismatch?

                         

                        Best Regards,

                        • 9. Re: emctl start dbconsole
                          Beauty_and_dBest

                          Thanks D7,

                           

                          But I already posted of the logs above. How can it mismatch a timezone when it just connecting to a single server?

                           

                           

                          This is the emdb.nohup logs for DEV1, and DEV2  which do not start if DEV3 is already successfully up.

                           

                          DEV2 emdb.nohup

                          ===============

                          ----- Tue Aug 22 14:58:19 2017::omsRecvDir is set? =  1 -----

                          ----- Tue Aug 22 14:58:19 2017::Console Launched with PID 5061 at time Tue Aug 22 14:58:19 2017 -----

                          ----- Tue Aug 22 14:58:19 2017::osname is linux -----

                          ----- Tue Aug 22 14:58:19 2017::heap size used is 384M -----

                          ----- Tue Aug 22 14:58:19 2017::perm size used is 400M -----

                          ----- Tue Aug 22 14:58:19 2017::joptions used are -server -Xmx384M -XX:MaxPermSize=400M -XX:MinHeapFreeRatio=20 -XX:MaxHeapFreeRatio=40  -----

                          ----- Tue Aug 22 14:58:19 2017::Agent Launched with PID 5079 at time Tue Aug 22 14:58:19 2017 -----

                          (pid=5079): starting emagent version 10.2.0.4.2

                          (pid=5079): emagent now exiting abnormally - initialization failure. Consult '.trc' and '.log' files.

                          ----- Tue Aug 22 14:58:22 2017::Checking status of EMAgent : 5079 -----

                          ----- Tue Aug 22 14:58:22 2017::EMAgent exited at Tue Aug 22 14:58:22 2017 with return value 55. -----

                          ----- Tue Aug 22 14:58:22 2017::EMAgent has exited due to initialization failure. -----

                          ----- Tue Aug 22 14:58:22 2017::Stopping other components. -----

                          ----- Tue Aug 22 14:58:22 2017::EMWD Stopping DBConsole. -----

                          WARNING: Code-source /u02/oradev2/DEV2/11.2.0/lib/xml.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev2/DEV2/11.2.0/oc4j/lib/xml.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/home/oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev2/DEV2/11.2.0/lib/xmlmesg.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev2/DEV2/11.2.0/oc4j/lib/xmlmesg.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/home/oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev2/DEV2/11.2.0/lib/xmlparserv2.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev2/DEV2/11.2.0/oc4j/lib/xmlparserv2.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/home/oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev2/DEV2/11.2.0/lib/oraclexsql.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev2/DEV2/11.2.0/oc4j/lib/oraclexsql.jar (from <library> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/OC4J_DBConsole_fittrn.myoracle.com_DEV2/config/application.xml). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev2/DEV2/11.2.0/sysman/jlib/j2ee/jsch.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev2/DEV2/11.2.0/oui/jlib/jsch.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev2/DEV2/11.2.0/sysman/jlib/j2ee/ssh.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev2/DEV2/11.2.0/oui/jlib/ssh.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev2/DEV2/11.2.0/sysman/jlib/j2ee/remoteinterfaces.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev2/DEV2/11.2.0/oui/jlib/remoteinterfaces.jar (from <classpath> in /u02/oradev2/DEV2/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          17/08/22 14:58:23 securePort = 5502

                          17/08/22 14:58:23 isOMSSecure = 1 isOMSSecureLocked = 1

                          17/08/22 14:58:26 ExtendClusterIntegration: init: start

                          17/08/22 14:58:26 ExtendClusterIntegration: init: end

                          17/08/22 14:58:26 ProvCommonIntegration.init, registering the Page Handlers and Page Segment Handlers

                          17/08/22 14:58:26 PAF Integration init BEGIN

                          17/08/22 14:58:26 PAF Integration init END

                          --- DBConsole internal stop. No OC4J admin passwd hence hard stop. ---

                          ----- Tue Aug 22 14:58:27 2017::Commiting Process death. -----

                          ----- Tue Aug 22 14:58:27 2017::Exiting watchdog loop

                          -----

                           

                           

                           

                          DEV1 emdb.nohup

                          ===============

                          ----- Tue Aug 22 12:37:39 2017::omsRecvDir is set? =  1 -----

                          ----- Tue Aug 22 12:37:39 2017::Console Launched with PID 18355 at time Tue Aug 22 12:37:39 2017 -----

                          ----- Tue Aug 22 12:37:39 2017::osname is linux -----

                          ----- Tue Aug 22 12:37:39 2017::heap size used is 384M -----

                          ----- Tue Aug 22 12:37:39 2017::perm size used is 400M -----

                          ----- Tue Aug 22 12:37:39 2017::joptions used are -server -Xmx384M -XX:MaxPermSize=400M -XX:MinHeapFreeRatio=20 -XX:MaxHeapFreeRatio=40  -----

                          ----- Tue Aug 22 12:37:39 2017::Agent Launched with PID 18367 at time Tue Aug 22 12:37:39 2017 -----

                          (pid=18367): starting emagent version 10.2.0.4.2

                          (pid=18367): emagent now exiting abnormally - initialization failure. Consult '.trc' and '.log' files.

                          ----- Tue Aug 22 12:37:42 2017::Checking status of EMAgent : 18367 -----

                          ----- Tue Aug 22 12:37:42 2017::EMAgent exited at Tue Aug 22 12:37:42 2017 with return value 55. -----

                          ----- Tue Aug 22 12:37:42 2017::EMAgent has exited due to initialization failure. -----

                          ----- Tue Aug 22 12:37:42 2017::Stopping other components. -----

                          ----- Tue Aug 22 12:37:42 2017::EMWD Stopping DBConsole. -----

                          WARNING: Code-source /u02/oradev1/DEV1/11.2.0/lib/xml.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev1/DEV1/11.2.0/oc4j/lib/xml.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/home/oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev1/DEV1/11.2.0/lib/xmlmesg.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev1/DEV1/11.2.0/oc4j/lib/xmlmesg.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/home/oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev1/DEV1/11.2.0/lib/xmlparserv2.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev1/DEV1/11.2.0/oc4j/lib/xmlparserv2.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/home/oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev1/DEV1/11.2.0/lib/oraclexsql.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev1/DEV1/11.2.0/oc4j/lib/oraclexsql.jar (from <library> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/OC4J_DBConsole_fittrn.myoracle.com_DEV1/config/application.xml). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev1/DEV1/11.2.0/sysman/jlib/j2ee/jsch.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev1/DEV1/11.2.0/oui/jlib/jsch.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev1/DEV1/11.2.0/sysman/jlib/j2ee/ssh.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev1/DEV1/11.2.0/oui/jlib/ssh.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          WARNING: Code-source /u02/oradev1/DEV1/11.2.0/sysman/jlib/j2ee/remoteinterfaces.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em) has the same filename but is not identical to /u02/oradev1/DEV1/11.2.0/oui/jlib/remoteinterfaces.jar (from <classpath> in /u02/oradev1/DEV1/11.2.0/oc4j/j2ee/oc4j_applications/applications/em/em). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader em.web.em:0.0.0.

                          17/08/22 12:37:45 securePort = 5501

                          17/08/22 12:37:45 isOMSSecure = 1 isOMSSecureLocked = 1

                          17/08/22 12:37:47 ExtendClusterIntegration: init: start

                          17/08/22 12:37:47 ExtendClusterIntegration: init: end

                          17/08/22 12:37:47 ProvCommonIntegration.init, registering the Page Handlers and Page Segment Handlers

                          17/08/22 12:37:47 PAF Integration init BEGIN

                          17/08/22 12:37:47 PAF Integration init END

                          --- DBConsole internal stop. No OC4J admin passwd hence hard stop. ---

                          ----- Tue Aug 22 12:37:47 2017::Commiting Process death. -----

                          ----- Tue Aug 22 12:37:47 2017::Exiting watchdog loop

                          -----

                          • 10. Re: emctl start dbconsole
                            Beauty_and_dBest

                            I noticed that I can only startup dbconsole to other databases, if I reboot the server

                             

                            For example ebconsole is running on database DEV3, then it cannot run anymore on DEV1, and DEV2. Even if I stop it from DEV3.

                            I need to reboot, so that dbconsole can be started at DEV1 Very weirddddd...

                            • 11. Re: emctl start dbconsole
                              dataseven

                              Can you try below?

                               

                              1. Unsecure the Dbconsole
                              – Unsecure database control using
                              $ORACLE_HOME/bin>emctl unsecure dbconsole

                              2. Force an upload:

                              $ORACLE_HOME/bin> emctl upload

                              3. Also consider Resecuring the Dbconsole
                              – Secure database control using
                              $ORACLE_HOME/bin>emctl secure dbconsole

                              • 12. Re: emctl start dbconsole
                                Beauty_and_dBest

                                Thanks D7,

                                 

                                Why need to secure back?

                                • 13. Re: emctl start dbconsole
                                  Beauty_and_dBest

                                  Wait...it started but I only see one running in ps -ef|grep dbconsole?

                                  • 14. Re: emctl start dbconsole
                                    dataseven

                                    İt is optional.

                                    if you want to support https browser you need to do it.

                                    I noticed that in your emlog there is a error regarding SSL connection

                                    maybe this workaround will solve your issue

                                     

                                    BEst regards,

                                    1 2 Previous Next