1 Reply Latest reply on Dec 16, 2019 11:49 AM by Nik

    can't open library PhysicalSRV2_lib_1 via host PhysicalSRV2 - device file not found

    3480068

      Warning: no hardware info is available for library PhysicalSRV2_lib_1 - device file not found

      PhysicalSRV2_lib_1:

          Device type:            library

          Model:                  STK     SL150

          Serial number:          464970G+1506SY3866

          In service:             yes

          Debug mode:             no

          Barcode reader:         default (hardware-selected)

          Barcodes required:      no

          Auto clean:             no

          Clean interval:         (not set)

          Clean using emptiest:   no

          Unload required:        yes

          Ejection type:          auto

          Min writable volumes:   0

          UUID:                   4987235a-be84-1032-bc89-dceb8018777c

          Attachment 1:

              Host:               PhysicalSRV2

              Raw device:         /dev/scsi/changer/c5t500104F000D81C5Bd1

          Attachment 2:

              Host:               PhysicalSRV2

              Raw device:         /dev/scsi/changer/c4t500104F000D81C5Bd1

          Connection type:        [unknown]

          Inquiry data:

              Vendor:             STK

              Product:            SL150

              Firmware:           0225

              Serial number:      464970G+1506SY3866

      opening handler - device file not found

      Warning: no hardware info is available for drive PhysicalSRV2_tape_1 - device file not found

      PhysicalSRV2_tape_1:

          Device type:            tape

          Model:                  HP      Ultrium 6-SCSI

          Serial number:          HUJ4502LNR

          In service:             yes

          Library:                PhysicalSRV2_lib_1

          DTE:                    1

          Automount:              yes

          Error rate:             8

          Position interval:      [undetermined]

          Debug mode:             no

          Blocking factor:        (default)

          Max blocking factor:    (default)

          Current tape:           [unknown]

          Use list:               all

          Drive usage:            3 days, 3 hours

          Cleaning required:      no

          UUID:                   499689bc-be84-1032-bc89-dceb8018777c

          Attachment 1:

              Host:               PhysicalSRV2

              Raw device:         /dev/scsi/sequential/c5t500104F000D81C5Bd0

          Attachment 2:

              Host:               PhysicalSRV2

              Raw device:         /dev/scsi/sequential/c4t500104F000D81C5Bd0

          Connection type:        [unknown]

          Inquiry data:

              Vendor:             HP

              Product:            Ultrium 6-SCSI

              Firmware:           22GS

              Serial number:      HUJ4502LNR

          Hardware compression:   not available

          Hardware encryption:    not available

        • 1. Re: can't open library PhysicalSRV2_lib_1 via host PhysicalSRV2 - device file not found
          Nik

          Hi.

          It's look like output of command  obtool lsdev --long

          I am not sure that Solaris 11 is correct section for you question. 

           

          From post is not clear:

             - What  problem you  have ?

             - Is it new installatoin of Oracle Secure Backup or  not ?

             - What connections used to library ? ( FC or SAS.  Direct connection or via FC switch, how many path used for every drive, how many tape drives installed at library )

           

          From Solaris show result of command:

          cfgadm -al -o show_FCP_dev

           

           

          Regards,

             Nik.