4 Replies Latest reply on Dec 12, 2002 9:40 PM by 3004

    MS .NET client error for a Workshop web service

    3004

      Hi,

      I have a WL Workshop Web service and a MS .NET web service in turn using the Workshop
      web service. I sometime get the following error when the .NET service invokes
      the Workshop service. But after I re-start WebLogic the whole thing works fine.
      Can somebody please help me.

      Thanks.

      Aalap.


      DotNetClient exception: System.Web.Services.Protocols.SoapException: Server was
      unable to process request. ---> System.InvalidOperationException: Namespace pref
      ix '{0}' not defined
      at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
      Reader reader)
      at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
      ntMessage message, WebResponse response, Stream responseStream)
      at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodN
      ame, Object[] parameters)
      at PSP.pspintermediary_webservice.getDocument(String authToken) in c:\inetpub
      \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
      at PSP.PSPWebService.printRequest(String pspAuthToken, String documentName,
      S
      tring printQuality, Int32 numberOfCopies, String paperSize, String emailAddress,
      String emailWebServiceURL) in c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
      75
      --- End of inner exception stack trace ---
      javax.xml.rpc.soap.SOAPFaultException: System.Web.Services.Protocols.SoapExcepti
      on: Server was unable to process request. ---> System.InvalidOperationException:
      Namespace prefix '{0}' not defined
      at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
      Reader reader)
      at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
      ntMessage message, WebResponse response, Stream responseStream)
      at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodN
      ame, Object[] parameters)
      at PSP.pspintermediary_webservice.getDocument(String authToken) in c:\inetpub
      \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
      at PSP.PSPWebService.printRequest(String pspAuthToken, String documentName,
      S
      tring printQuality, Int32 numberOfCopies, String paperSize, String emailAddress,
      String emailWebServiceURL) in c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
      75
      --- End of inner exception stack trace ---
      at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
      a:459)
      at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
      a:359)
      at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:416)
      at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:290)
      at gui.DotNetClient.sendRequest(DotNetClient.java:247)
      at gui.PrintRequestServlet.doPost(PrintRequestServlet.java:81)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
      at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
      (ServletStubImpl.java:1058)
      at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
      pl.java:401)
      at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
      pl.java:306)
      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5412)
      at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
      eManager.java:744)
      at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
      rvletContext.java:3086)
      at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
      pl.java:2544)
      at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
      at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)



        • 1. Re: MS .NET client error for a Workshop web service
          3004
          Aalap,

          Have you been able to narrow down the problem to check whether there is any
          particular type of webservice which causes this error? Also, are you able to
          resolve the problem everytime by restarting WebLogic Server.

          I have seen this problem a few times, when the DOT Net client was unable to
          run the Workshop service due to some incompatibility in the support for
          particular WSDL features. However, I do not recall it getting resolved on
          restarting the WebLogic Server.

          It will be great if you could test whether this occurs for any particular
          webservice and then please attach the concerned WSDL.

          Do let me know if you need any further help.

          Regards,
          Anurag




          "Aalap Parikh" <aloo77@yahoo.com> wrote in message
          news:3df034ee@newsgroups.bea.com...
          >
          Hi,

          I have a WL Workshop Web service and a MS .NET web service in turn using
          the Workshop
          web service. I sometime get the following error when the .NET service
          invokes
          the Workshop service. But after I re-start WebLogic the whole thing works
          fine.
          Can somebody please help me.

          Thanks.

          Aalap.


          DotNetClient exception: System.Web.Services.Protocols.SoapException:
          Server was
          unable to process request. ---> System.InvalidOperationException:
          Namespace pref
          ix '{0}' not defined
          at
          System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
          Reader reader)
          at
          System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
          ntMessage message, WebResponse response, Stream responseStream)
          at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
          methodN
          ame, Object[] parameters)
          at PSP.pspintermediary_webservice.getDocument(String authToken) in
          c:\inetpub
          \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
          at PSP.PSPWebService.printRequest(String pspAuthToken, String
          documentName,
          S
          tring printQuality, Int32 numberOfCopies, String paperSize, String
          emailAddress,
          String emailWebServiceURL) in
          c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
          75
          --- End of inner exception stack trace ---
          javax.xml.rpc.soap.SOAPFaultException:
          System.Web.Services.Protocols.SoapExcepti
          on: Server was unable to process request. --->
          System.InvalidOperationException:
          Namespace prefix '{0}' not defined
          at
          System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
          Reader reader)
          at
          System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
          ntMessage message, WebResponse response, Stream responseStream)
          at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
          methodN
          ame, Object[] parameters)
          at PSP.pspintermediary_webservice.getDocument(String authToken) in
          c:\inetpub
          \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
          at PSP.PSPWebService.printRequest(String pspAuthToken, String
          documentName,
          S
          tring printQuality, Int32 numberOfCopies, String paperSize, String
          emailAddress,
          String emailWebServiceURL) in
          c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
          75
          --- End of inner exception stack trace ---
          at
          weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
          a:459)
          at
          weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
          a:359)
          at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:416)
          at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:290)
          at gui.DotNetClient.sendRequest(DotNetClient.java:247)
          at gui.PrintRequestServlet.doPost(PrintRequestServlet.java:81)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          at
          weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
          (ServletStubImpl.java:1058)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
          pl.java:401)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
          pl.java:306)
          at
          weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
          ebAppServletContext.java:5412)
          at
          weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
          eManager.java:744)
          at
          weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
          rvletContext.java:3086)
          at
          weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
          pl.java:2544)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)


          • 2. URGENT !!! Re: MS .NET client error for a Workshop web service
            3004

            Hi Anurag,

            Sorry for getting back late...

            First, the problem does not get resolved everytime by restarting weblogic....sometimes
            after restarting the same problem has occured...then i restated the 3rd time and
            it is fine...

            i got the same problem once again today...and this time after getting the message,
            I fired up the Workshop test harness for that web service...and look what I found...in
            the "Test Form" message log I the message logged for the request that had come
            from the Dot NET client...and message is pasted below...the request is getDocument()
            method with a single string passed in...
            the two error messages can be seen as "Exception" and "Service Response".

            I am also attaching the WSDL of this WL Workshop web service as an attachment
            to this message.

            From the message it looks like something to do with jndi...the dot NET client
            looks ok to me now...

            Please help Anurag...This demo of this stuff is due a day from tomorrow (Wed.)
            and I absolutely need to deliver it on that day...I can't have this error creeping
            up...

            Thanks.

            Aalap.



            Service Request
            Submitted at Mon Dec 09 15:44:36 PST 2002

            getDocument

            <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <soap:Body>
            <getDocument xmlns="http://www.pspinter.com/">
            <authToken>dfgh5678</authToken>
            </getDocument>
            </soap:Body>
            </soap:Envelope>


            Exception
            Submitted at Mon Dec 09 15:44:36 PST 2002

            getDocument

            weblogic.jws.control.ControlException: jndi:UserManagerEJB.UserManagerHome is
            not a valid JNDI URL[unknown protocol: jndi] at weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:273)
            at weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext.java:220)
            at weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at PspIntermediaryControl.getDocumentPath(PspIntermediaryControl.ctrl)
            at pspintermediary_webservice.getDocument(pspintermediary_webservice.jws:24)


            Service Response
            Submitted at Mon Dec 09 15:44:36 PST 2002

            getDocument

            <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SOAP-ENV:Body>
            <SOAP-ENV:Fault>
            <faultcode> SOAP-ENV:JWS Error </faultcode>
            <faultstring> jndi:UserManagerEJB.UserManagerHome is not a valid JNDI URL[unknown
            protocol: jndi] </faultstring>
            <detail> weblogic.jws.control.ControlException: jndi:UserManagerEJB.UserManagerHome
            is not a valid JNDI URL[unknown protocol: jndi] at weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:273)
            at weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext.java:220)
            at weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at PspIntermediaryControl.getDocumentPath(PspIntermediaryControl.ctrl)
            at pspintermediary_webservice.getDocument(pspintermediary_webservice.jws:24) </detail>
            </SOAP-ENV:Fault>
            </SOAP-ENV:Body>
            </SOAP-ENV:Envelope>



            "Anurag Pareek" <Reply@ToNewsgroups.Only> wrote:
            Aalap,

            Have you been able to narrow down the problem to check whether there
            is any
            particular type of webservice which causes this error? Also, are you
            able to
            resolve the problem everytime by restarting WebLogic Server.

            I have seen this problem a few times, when the DOT Net client was unable
            to
            run the Workshop service due to some incompatibility in the support for
            particular WSDL features. However, I do not recall it getting resolved
            on
            restarting the WebLogic Server.

            It will be great if you could test whether this occurs for any particular
            webservice and then please attach the concerned WSDL.

            Do let me know if you need any further help.

            Regards,
            Anurag




            "Aalap Parikh" <aloo77@yahoo.com> wrote in message
            news:3df034ee@newsgroups.bea.com...
            Hi,

            I have a WL Workshop Web service and a MS .NET web service in turn
            using
            the Workshop
            web service. I sometime get the following error when the .NET service
            invokes
            the Workshop service. But after I re-start WebLogic the whole thing
            works
            fine.
            Can somebody please help me.

            Thanks.

            Aalap.


            DotNetClient exception: System.Web.Services.Protocols.SoapException:
            Server was
            unable to process request. ---> System.InvalidOperationException:
            Namespace pref
            ix '{0}' not defined
            at
            System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
            Reader reader)
            at
            System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
            ntMessage message, WebResponse response, Stream responseStream)
            at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
            methodN
            ame, Object[] parameters)
            at PSP.pspintermediary_webservice.getDocument(String authToken)
            in
            c:\inetpub
            \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
            at PSP.PSPWebService.printRequest(String pspAuthToken, String
            documentName,
            S
            tring printQuality, Int32 numberOfCopies, String paperSize, String
            emailAddress,
            String emailWebServiceURL) in
            c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
            75
            --- End of inner exception stack trace ---
            javax.xml.rpc.soap.SOAPFaultException:
            System.Web.Services.Protocols.SoapExcepti
            on: Server was unable to process request. --->
            System.InvalidOperationException:
            Namespace prefix '{0}' not defined
            at
            System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
            Reader reader)
            at
            System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
            ntMessage message, WebResponse response, Stream responseStream)
            at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
            methodN
            ame, Object[] parameters)
            at PSP.pspintermediary_webservice.getDocument(String authToken)
            in
            c:\inetpub
            \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
            at PSP.PSPWebService.printRequest(String pspAuthToken, String
            documentName,
            S
            tring printQuality, Int32 numberOfCopies, String paperSize, String
            emailAddress,
            String emailWebServiceURL) in
            c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
            75
            --- End of inner exception stack trace ---
            at
            weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
            a:459)
            at
            weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
            a:359)
            at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:416)
            at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:290)
            at gui.DotNetClient.sendRequest(DotNetClient.java:247)
            at gui.PrintRequestServlet.doPost(PrintRequestServlet.java:81)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
            at
            weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
            (ServletStubImpl.java:1058)
            at
            weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
            pl.java:401)
            at
            weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
            pl.java:306)
            at
            weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
            ebAppServletContext.java:5412)
            at
            weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
            eManager.java:744)
            at
            weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
            rvletContext.java:3086)
            at
            weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
            pl.java:2544)
            at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
            at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)


            [pspintermediary_webserviceContract.wsdl]
            • 3. Same error on using Test Harness Re: MS .NET client error for a Workshop web service
              3004

              Hi ANurag,

              I get the same error as described before even when I use the WL Workshop Test
              Harness for the web service, leave aside using a dot NET client for this service...this
              and the error message conform that it is something within the WL Workshop and
              not a dot NET client issue...

              please respond...
              SOS

              thanks in advance.

              Regards,
              Aalap.

              "Anurag Pareek" <Reply@ToNewsgroups.Only> wrote:
              Aalap,

              Have you been able to narrow down the problem to check whether there
              is any
              particular type of webservice which causes this error? Also, are you
              able to
              resolve the problem everytime by restarting WebLogic Server.

              I have seen this problem a few times, when the DOT Net client was unable
              to
              run the Workshop service due to some incompatibility in the support for
              particular WSDL features. However, I do not recall it getting resolved
              on
              restarting the WebLogic Server.

              It will be great if you could test whether this occurs for any particular
              webservice and then please attach the concerned WSDL.

              Do let me know if you need any further help.

              Regards,
              Anurag




              "Aalap Parikh" <aloo77@yahoo.com> wrote in message
              news:3df034ee@newsgroups.bea.com...
              Hi,

              I have a WL Workshop Web service and a MS .NET web service in turn
              using
              the Workshop
              web service. I sometime get the following error when the .NET service
              invokes
              the Workshop service. But after I re-start WebLogic the whole thing
              works
              fine.
              Can somebody please help me.

              Thanks.

              Aalap.


              DotNetClient exception: System.Web.Services.Protocols.SoapException:
              Server was
              unable to process request. ---> System.InvalidOperationException:
              Namespace pref
              ix '{0}' not defined
              at
              System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
              Reader reader)
              at
              System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
              ntMessage message, WebResponse response, Stream responseStream)
              at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
              methodN
              ame, Object[] parameters)
              at PSP.pspintermediary_webservice.getDocument(String authToken)
              in
              c:\inetpub
              \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
              at PSP.PSPWebService.printRequest(String pspAuthToken, String
              documentName,
              S
              tring printQuality, Int32 numberOfCopies, String paperSize, String
              emailAddress,
              String emailWebServiceURL) in
              c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
              75
              --- End of inner exception stack trace ---
              javax.xml.rpc.soap.SOAPFaultException:
              System.Web.Services.Protocols.SoapExcepti
              on: Server was unable to process request. --->
              System.InvalidOperationException:
              Namespace prefix '{0}' not defined
              at
              System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
              Reader reader)
              at
              System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
              ntMessage message, WebResponse response, Stream responseStream)
              at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
              methodN
              ame, Object[] parameters)
              at PSP.pspintermediary_webservice.getDocument(String authToken)
              in
              c:\inetpub
              \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
              at PSP.PSPWebService.printRequest(String pspAuthToken, String
              documentName,
              S
              tring printQuality, Int32 numberOfCopies, String paperSize, String
              emailAddress,
              String emailWebServiceURL) in
              c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
              75
              --- End of inner exception stack trace ---
              at
              weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
              a:459)
              at
              weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
              a:359)
              at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:416)
              at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:290)
              at gui.DotNetClient.sendRequest(DotNetClient.java:247)
              at gui.PrintRequestServlet.doPost(PrintRequestServlet.java:81)
              at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
              at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
              at
              weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
              (ServletStubImpl.java:1058)
              at
              weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
              pl.java:401)
              at
              weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
              pl.java:306)
              at
              weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
              ebAppServletContext.java:5412)
              at
              weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
              eManager.java:744)
              at
              weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
              rvletContext.java:3086)
              at
              weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
              pl.java:2544)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)


              • 4. Re: URGENT !!! Re: MS .NET client error for a Workshop web service
                3004
                Aalap,

                Apologies for missing out on this message. I could only see it today.

                Unfortunately, we are unable to open the attachments in this message of
                yours. Could you please send the error message again.

                When you test with a Workshop client, do you get the error everytime, or
                does it occur randomly?

                Regards,
                Anurag

                "Aalap Parikh" <aloo77@yahoo.com> wrote in message
                news:3df53013@newsgroups.bea.com...
                >
                Hi Anurag,

                Sorry for getting back late...

                First, the problem does not get resolved everytime by restarting
                weblogic....sometimes
                after restarting the same problem has occured...then i restated the 3rd
                time and
                it is fine...

                i got the same problem once again today...and this time after getting the
                message,
                I fired up the Workshop test harness for that web service...and look what
                I found...in
                the "Test Form" message log I the message logged for the request that had
                come
                from the Dot NET client...and message is pasted below...the request is
                getDocument()
                method with a single string passed in...
                the two error messages can be seen as "Exception" and "Service Response".

                I am also attaching the WSDL of this WL Workshop web service as an
                attachment
                to this message.

                From the message it looks like something to do with jndi...the dot NET
                client
                looks ok to me now...

                Please help Anurag...This demo of this stuff is due a day from tomorrow
                (Wed.)
                and I absolutely need to deliver it on that day...I can't have this error
                creeping
                up...

                Thanks.

                Aalap.



                Service Request
                Submitted at Mon Dec 09 15:44:36 PST 2002

                getDocument

                <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
                xmlns:xsd="http://www.w3.org/2001/XMLSchema"
                xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <soap:Body>
                <getDocument xmlns="http://www.pspinter.com/">
                <authToken>dfgh5678</authToken>
                </getDocument>
                </soap:Body>
                </soap:Envelope>


                Exception
                Submitted at Mon Dec 09 15:44:36 PST 2002

                getDocument

                weblogic.jws.control.ControlException: jndi:UserManagerEJB.UserManagerHome
                is
                not a valid JNDI URL[unknown protocol: jndi] at
                weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
                3)
                at
                weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
                .java:220)
                at weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
                PspIntermediaryControl.getDocumentPath(PspIntermediaryControl.ctrl)
                at
                pspintermediary_webservice.getDocument(pspintermediary_webservice.jws:24)
                >
                >
                Service Response
                Submitted at Mon Dec 09 15:44:36 PST 2002

                getDocument

                <SOAP-ENV:Envelope
                xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
                xmlns:xsd="http://www.w3.org/2001/XMLSchema"
                xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SOAP-ENV:Body>
                <SOAP-ENV:Fault>
                <faultcode> SOAP-ENV:JWS Error </faultcode>
                <faultstring> jndi:UserManagerEJB.UserManagerHome is not a valid JNDI
                URL[unknown
                protocol: jndi] </faultstring>
                <detail> weblogic.jws.control.ControlException:
                jndi:UserManagerEJB.UserManagerHome
                is not a valid JNDI URL[unknown protocol: jndi] at
                weblogic.knex.control.EJBControlImpl.acquireResources(EJBControlImpl.java:27
                3)
                at
                weblogic.knex.context.JwsInternalContext.acquireResources(JwsInternalContext
                .java:220)
                at weblogic.knex.control.ControlHandler.invoke(ControlHandler.java:260) at
                PspIntermediaryControl.getDocumentPath(PspIntermediaryControl.ctrl)
                at
                pspintermediary_webservice.getDocument(pspintermediary_webservice.jws:24)
                </detail>
                </SOAP-ENV:Fault>
                </SOAP-ENV:Body>
                </SOAP-ENV:Envelope>



                "Anurag Pareek" <Reply@ToNewsgroups.Only> wrote:
                Aalap,

                Have you been able to narrow down the problem to check whether there
                is any
                particular type of webservice which causes this error? Also, are you
                able to
                resolve the problem everytime by restarting WebLogic Server.

                I have seen this problem a few times, when the DOT Net client was unable
                to
                run the Workshop service due to some incompatibility in the support for
                particular WSDL features. However, I do not recall it getting resolved
                on
                restarting the WebLogic Server.

                It will be great if you could test whether this occurs for any particular
                webservice and then please attach the concerned WSDL.

                Do let me know if you need any further help.

                Regards,
                Anurag




                "Aalap Parikh" <aloo77@yahoo.com> wrote in message
                news:3df034ee@newsgroups.bea.com...
                Hi,

                I have a WL Workshop Web service and a MS .NET web service in turn
                using
                the Workshop
                web service. I sometime get the following error when the .NET service
                invokes
                the Workshop service. But after I re-start WebLogic the whole thing
                works
                fine.
                Can somebody please help me.

                Thanks.

                Aalap.


                DotNetClient exception: System.Web.Services.Protocols.SoapException:
                Server was
                unable to process request. ---> System.InvalidOperationException:
                Namespace pref
                ix '{0}' not defined
                at
                System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
                Reader reader)
                at
                System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
                ntMessage message, WebResponse response, Stream responseStream)
                at
                System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
                methodN
                ame, Object[] parameters)
                at PSP.pspintermediary_webservice.getDocument(String authToken)
                in
                c:\inetpub
                \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
                at PSP.PSPWebService.printRequest(String pspAuthToken, String
                documentName,
                S
                tring printQuality, Int32 numberOfCopies, String paperSize, String
                emailAddress,
                String emailWebServiceURL) in
                c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
                75
                --- End of inner exception stack trace ---
                javax.xml.rpc.soap.SOAPFaultException:
                System.Web.Services.Protocols.SoapExcepti
                on: Server was unable to process request. --->
                System.InvalidOperationException:
                Namespace prefix '{0}' not defined
                at
                System.Web.Services.Protocols.SoapHttpClientProtocol.ReadSoapException(Xml
                Reader reader)
                at
                System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClie
                ntMessage message, WebResponse response, Stream responseStream)
                at
                System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String
                methodN
                ame, Object[] parameters)
                at PSP.pspintermediary_webservice.getDocument(String authToken)
                in
                c:\inetpub
                \wwwroot\PSP\Web References\vaio\Reference.cs:line 37
                at PSP.PSPWebService.printRequest(String pspAuthToken, String
                documentName,
                S
                tring printQuality, Int32 numberOfCopies, String paperSize, String
                emailAddress,
                String emailWebServiceURL) in
                c:\inetpub\wwwroot\psp\pspwebservice.asmx.cs:line
                75
                --- End of inner exception stack trace ---
                at
                weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
                a:459)
                at
                weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.jav
                a:359)
                at
                weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:416)
                at
                weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:290)
                at gui.DotNetClient.sendRequest(DotNetClient.java:247)
                at gui.PrintRequestServlet.doPost(PrintRequestServlet.java:81)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                at
                weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
                (ServletStubImpl.java:1058)
                at
                weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
                pl.java:401)
                at
                weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
                pl.java:306)
                at
                weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(
                W
                ebAppServletContext.java:5412)
                at
                weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
                eManager.java:744)
                at
                weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
                rvletContext.java:3086)
                at
                weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
                pl.java:2544)
                at
                weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
                at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)