I have OID 10.1.4.3.0 and RedHat 4 UP5 in the server, and I'm trying to configure the server with
I started the script to configure the server with SSL mode:
OAS4OS: Release 10.1.4.0.1 - Production
Copyright (c) 2008 Oracle. All rights reserved.
Configuring Linux Authentication on OID server side ...
Please make sure that your OID server is currently up and running. Please also make sure that your OID server processes are brought up by opmnctl.
Please specify the realm
E.g. dc=us,dc=oracle,dc=com: dc=vm,dc=oracle,dc=com
Please specify OID non-SSL port: 389
Please enter OID cn=orcladmin password:
Please enter the Password for your new Oracle wallet:
opmnctl: restarting opmn managed processes...
Note that the script asks for the non-SSL port, instead of the SSL port.
Then, the script for SSL mode configure the script for the client with the non-SSL port:
[INFRA:~/infra/ldap/bin]$ grep -i oidServerPort= sslConfig_OIDclient.sh
After that, I copied the files again (the fresh files), and I run the script for SSL again,
and when the script asked to me by the non-SSL portl I entered the SSL-port 636, but the
script didn't finished to execute anymore.
Then, appears to be a problem with this.
As the configuration for SSL uses TSL, I mean, the ldap operation uses TLS from the client side, then the ldap connection uses the non-SSL port under TLS.
Then, when the configuration with SSL ask you by the non-SSL port, this is good.
The configuration script for SSL can takes some seconds before release the command line, I just wait for some more seconds, and the configuration was executed without problems.
I am also working on the OAS4OS 10.1.4.3.
I ran into some issues similar to what you have described.
Could you please let me know if you are successful in doing the OAS4OS?
I am some what confused to which version of OID to be used as the OAS4OS package installabled downloaded file(ReadME.txt) says it needs OID 10.1.4.3 version where as its Admin Guide says that it needs to be upgraded to OID 10.1.4.2.
But I have upgraded to 10.1.4.3 and I have no idea whether this version does not require any config tools to migrate the users, to add the users etc., to OID.
I would appreciate any help on this.
Thanks in advance,
I configured OAS4OS 10.1.4.3.0 with OID 10.1.4.3.0 sucessfully.
And yes, you need OID 10.1.4.3.0.
As far as I know, the OAS4OS guide that we have until this moment is for OAS4OS 10.1.4.2.0, then, for that reason you saw that.
But the fact, is that you have to upgrade OID to 10.1.4.3.0 before install/reinstall OAS4OS 10.1.4.3.0.