1 2 Previous Next 25 Replies Latest reply on Oct 19, 2009 8:19 AM by 631368 Go to original post
      • 15. Re: 500 Internal server error
        Hussein Sawwan-Oracle
        Hi,

        I cannot post the contents of the document for obvious reasons. However, to enable debug please do the following:

        Change the following parameter to "debug" in the application context file, and run AutoConfig then. If you could not find "s_apache_loglevel" in the context file, then just update httpd.conf to contain "LogLevel debug" and bounce the application services.

        <apache_loglevel oa_var="s_apache_loglevel">warn</apache_loglevel>

        Regards,
        Hussein
        • 16. Re: 500 Internal server error
          708463
          Hii,

          Thanks so much, I am very grateful. Will try this and get back to you.
          • 17. Re: 500 Internal server error
            708463
            Hii,

            I found httpd but it is a fairly large file and i dont know the exact place to add 'Loglevel debug' as insructed. I would have post the content here but it may be too large.

            Can you please tell me the exact place to insert the 'Loglevel debug'. I have sent the httpd folder to your mailbox Pls do check ur mail. Thanks.
            • 18. Re: 500 Internal server error
              708463
              Hii,

              This is the httpd.conf file kind tell me where precisely i am suppose to insert the "Loglevel debug". Thanks


              ##
              ## $Header: httpd_conf_1013_nt.tmp 120.13 2008/07/03 12:57:32 sbandla ship $
              ## httpd.conf -- Oracle HTTP Server (powered by Apache) configuration file
              ##

              # ###############################################################
              #
              # This file is automatically generated by AutoConfig. It will be read and
              # overwritten. If you were instructed to edit this file, or if you are not
              # able to use the settings created by AutoConfig, refer to Metalink Note
              # 387859.1 for assistance.
              #
              # ###############################################################

              #
              # Based upon the NCSA server configuration files originally by Rob McCool.
              #
              # This is the main Apache server configuration file. It contains the
              # configuration directives that give the server its instructions.
              # See <URL:http://www.apache.org/docs/> for detailed information about
              # the directives.
              #
              # Do NOT simply read the instructions in here without understanding
              # what they do. They're here only as hints or reminders. If you are unsure
              # consult the online docs. You have been warned.
              #
              # After this file is processed, the server will look for and process
              # E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/conf/srm.conf and then E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/conf/access.conf
              # unless you have overridden these with ResourceConfig and/or
              # AccessConfig directives here.
              #
              # The configuration directives are grouped into three basic sections:
              # 1. Directives that control the operation of the Apache server process as a
              # whole (the 'global environment').
              # 2. Directives that define the parameters of the 'main' or 'default' server,
              # which responds to requests that aren't handled by a virtual host.
              # These directives also provide default values for the settings
              # of all virtual hosts.
              # 3. Settings for virtual hosts, which allow Web requests to be sent to
              # different IP addresses or hostnames and have them handled by the
              # same Apache server process.
              #
              # Configuration and logfile names: If the filenames you specify for many
              # of the server's control files begin with "/" (or "drive:/" for Win32), the
              # server will use that explicit path. If the filenames do not begin
              # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
              # with ServerRoot set to "/usr/local/apache" will be interpreted by the
              # server as "/usr/local/apache/logs/foo.log".
              #

              ### Section 1: Global Environment
              #
              # The directives in this section affect the overall operation of Apache,
              # such as the number of concurrent requests it can handle or where it
              # can find its configuration files.
              #

              #
              # ServerType is either inetd, or standalone. Inetd mode is only supported on
              # Unix platforms.
              #
              ServerType standalone

              #
              # ServerRoot: The top of the directory tree under which the server's
              # configuration, error, and log files are kept.
              #
              # NOTE! If you intend to place this on an NFS (or otherwise network)
              # mounted filesystem then please read the LockFile documentation
              # (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
              # you will save yourself a lot of trouble.
              #
              # Do NOT add a slash at the end of the directory path.
              #
              ServerRoot "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache"

              #
              # The following directive controls the directory to which Apache attempts to
              # switch before dumping core.
              #

              CoreDumpDirectory "E:\oracle\VIS\inst\apps\VIS_dominion\logs\ora\10.1.3\Apache"


              #
              # The LockFile directive sets the path to the lockfile used when Apache
              # is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
              # USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
              # its default value. The main reason for changing it is if the logs
              # directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
              # DISK. The PID of the main server process is automatically appended to
              # the filename.
              #
              LockFile E:\oracle\VIS\inst\apps\VIS_dominion\pids\10.1.3\Apache\logs/httpd.lock

              #
              # PidFile: The file in which the server should record its process
              # identification number when it starts.
              #
              PidFile E:\oracle\VIS\inst\apps\VIS_dominion\pids\10.1.3\Apache\httpd.pid

              #
              # ScoreBoardFile: File used to store internal server process information.
              # Not all architectures require this. But if yours does (you'll know because
              # this file will be created when you run Apache) then you must ensure that
              # no two invocations of Apache share the same scoreboard file.
              #
              ScoreBoardFile E:\oracle\VIS\inst\apps\VIS_dominion\pids\10.1.3\Apache\logs/httpd.scoreboard

              #
              # In the standard configuration, the server will process httpd.conf (this
              # file, specified by the -f command line option), srm.conf, and access.conf
              # in that order. The latter two files are now distributed empty, as it is
              # recommended that all directives be kept in a single file for simplicity.
              # The commented-out values below are the built-in defaults. You can have the
              # server ignore these files altogether by using "/dev/null" (for Unix) or
              # "nul" (for Win32) for the arguments to the directives.
              #
              #ResourceConfig conf/srm.conf
              #AccessConfig conf/access.conf

              #
              # Timeout: The number of seconds before receives and sends time out.
              #
              Timeout 300

              #
              # KeepAlive: Whether or not to allow persistent connections (more than
              # one request per connection). Set to "Off" to deactivate.
              #
              KeepAlive ON

              #
              # MaxKeepAliveRequests: The maximum number of requests to allow
              # during a persistent connection. Set to 0 to allow an unlimited amount.
              # We recommend you leave this number high, for maximum performance.
              #
              MaxKeepAliveRequests 0

              #
              # KeepAliveTimeout: Number of seconds to wait for the next request from the
              # same client on the same connection.
              #
              KeepAliveTimeout 15

              #
              # Server-pool size regulation. Rather than making you guess how many
              # server processes you need, Apache dynamically adapts to the load it
              # sees --- that is, it tries to maintain enough server processes to
              # handle the current load, plus a few spare servers to handle transient
              # load spikes (e.g., multiple simultaneous requests from a single
              # Netscape browser).
              #
              # It does this by periodically checking how many servers are waiting
              # for a request. If there are fewer than MinSpareServers, it creates
              # a new spare. If there are more than MaxSpareServers, some of the
              # spares die off. The default values are probably OK for most sites.
              #
              MinSpareServers 5
              MaxSpareServers 10

              #
              # Number of servers to start initially --- should be a reasonable ballpark
              # figure.
              #
              StartServers 5

              #
              # Limit on total number of servers running, i.e., limit on the number
              # of clients who can simultaneously connect --- if this limit is ever
              # reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
              # It is intended mainly as a brake to keep a runaway server from taking
              # the system with it as it spirals down...
              #
              ThreadsPerChild 512

              #
              # MaxRequestsPerChild: the number of requests each child process is
              # allowed to process before the child dies. The child will exit so
              # as to avoid problems after prolonged use when Apache (and maybe the
              # libraries it uses) leak memory or other resources. On most systems, this
              # isn't really needed, but a few (such as Solaris) do have notable leaks
              # in the libraries. For these platforms, set to something like 10000
              # or so; a setting of 0 means unlimited.
              #
              # NOTE: This value does not include keepalive requests after the initial
              # request per connection. For example, if a child process handles
              # an initial request and 10 subsequent "keptalive" requests, it
              # would only count as 1 request towards this limit.
              #
              MaxRequestsPerChild 0

              #
              # Listen: Allows you to bind Apache to specific IP addresses and/or
              # ports, in addition to the default. See also the <VirtualHost>
              # directive.
              #
              #Listen 3000
              #Listen 12.34.56.78:80

              #
              # BindAddress: You can support virtual hosts with this option. This directive
              # is used to tell the server which IP address to listen to. It can either
              # contain "*", an IP address, or a fully qualified Internet domain name.
              # See also the <VirtualHost> and Listen directives.
              #
              #BindAddress *

              #
              # Dynamic Shared Object (DSO) Support
              #
              # To be able to use the functionality of a module which was built as a DSO you
              # have to place corresponding `LoadModule' lines at this location so the
              # directives contained in it are actually available before they are used.
              # Please read the file README.DSO in the Apache 1.3 distribution for more
              # details about the DSO mechanism and run `httpd -l' for the list of already
              # built-in (statically linked and thus always available) modules in your httpd
              # binary.
              #
              # Note: The order in which modules are loaded is important. Don't change
              # the order below without expert advice.
              #
              # Example:
              # LoadModule foo_module libexec/mod_foo.so
              LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
              LoadModule mime_module          modules/ApacheModuleMime.dll
              #LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
              #LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
              #LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
              #LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
              #LoadModule digest_module      modules/ApacheModuleDigest.dll
              LoadModule expires_module      modules/ApacheModuleExpires.dll
              LoadModule headers_module      modules/ApacheModuleHeaders.dll
              #LoadModule proxy_module      modules/ApacheModuleProxy.dll
              #LoadModule speling_module      modules/ApacheModuleSpeling.dll
              LoadModule status_module      modules/ApacheModuleStatus.dll
              LoadModule info_module          modules/ApacheModuleInfo.dll
              LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
              LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
              LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
              LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
              #LoadModule perl_module      modules/ApacheModulePerl.DLL
              #LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
              #LoadModule php4_module modules/ApacheModulePHP4.dll
              LoadModule onsint_module      modules/ApacheModuleOnsint.dll
              LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll

              ClearModuleList
              AddModule mod_so.c
              AddModule mod_onsint.c
              AddModule mod_mime_magic.c
              AddModule mod_mime.c
              AddModule mod_access.c
              AddModule mod_auth.c
              AddModule mod_negotiation.c
              AddModule mod_include.c
              AddModule mod_autoindex.c
              AddModule mod_dir.c
              AddModule mod_cgi.c
              #AddModule mod_userdir.c
              AddModule mod_alias.c
              AddModule mod_env.c
              AddModule mod_log_config.c
              AddModule mod_asis.c
              AddModule mod_imap.c
              AddModule mod_actions.c
              AddModule mod_setenvif.c
              AddModule mod_isapi.c
              AddModule mod_vhost_alias.c
              AddModule mod_log_referer.c
              AddModule mod_log_agent.c
              #AddModule mod_auth_anon.c
              #AddModule mod_auth_dbm.c
              #AddModule mod_auth_digest.c
              #AddModule mod_cern_meta.c
              #AddModule mod_digest.c
              AddModule mod_expires.c
              AddModule mod_headers.c
              #AddModule mod_proxy.c
              #AddModule mod_speling.c
              AddModule mod_info.c
              AddModule mod_status.c
              AddModule mod_usertrack.c
              #AddModule mod_perl.c
              #AddModule mod_fastcgi.c
              #AddModule mod_php4.c
              AddModule mod_wchandshake.c

              <IfDefine SSL>
              LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
              </IfDefine>

              #
              # ExtendedStatus controls whether Apache will generate "full" status
              # information (ExtendedStatus On) or just basic information (ExtendedStatus
              # Off) when the "server-status" handler is called. The default is Off.
              #
              ExtendedStatus On

              #Turn off TraceEnable to Fix Cross Site Tracing Vulnerability (bug 6416086)

              TraceEnable Off

              ### Section 2: 'Main' server configuration
              #
              # The directives in this section set up the values used by the 'main'
              # server, which responds to any requests that aren't handled by a
              # <VirtualHost> definition. These values also provide defaults for
              # any <VirtualHost> containers you may define later in the file.
              #
              # All of these directives may appear inside <VirtualHost> containers,
              # in which case these default settings will be overridden for the
              # virtual host being defined.
              #

              #
              # If your ServerType directive (set earlier in the 'Global Environment'
              # section) is set to "inetd", the next few directives don't have any
              # effect since their settings are defined by the inetd configuration.
              # Skip ahead to the ServerAdmin directive.
              #

              #
              # Port: The port to which the standalone server listens. For
              # ports < 1024, you will need httpd to be run as root initially.
              #
              # This port is used when starting without SSL
              Port 8000
              Listen 8000

              #
              # If you wish httpd to run as a different user or group, you must run
              # httpd as root initially and it will switch.
              #
              # User/Group: The name (or #number) of the user/group to run httpd as.
              # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
              # . On HPUX you may not be able to use shared memory as nobody, and the
              # suggested workaround is to create a user www and use that user.
              # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
              # when the value of (unsigned)Group is above 60000;
              # don't use Group nobody on these systems!
              #
              User %s_appsuser%
              Group %s_appsgroup%

              #
              # ServerAdmin: Your address, where problems with the server should be
              # e-mailed. This address appears on some server-generated pages, such
              # as error documents.
              #
              ServerAdmin ohs_admin@rehoboth.com

              #
              # ServerName allows you to set a host name which is sent back to clients for
              # your server if it's different than the one the program would get (i.e., use
              # "www" instead of the host's real name).
              #
              # Note: You cannot just invent host names and hope they work. The name you
              # define here must be a valid DNS name for your host. If you don't understand
              # this, ask your network administrator.
              # If your host doesn't have a registered DNS name, enter its IP address here.
              # You will have to access it by its address (e.g., http://123.45.67.89/)
              # anyway, and this will make redirections work in a sensible way.
              #
              # 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
              # machine always knows itself by this address. If you use Apache strictly for
              # local testing and development, you may use 127.0.0.1 as the server name.
              #
              ServerName dominion.rehoboth.com

              #
              # DocumentRoot: The directory out of which you will serve your
              # documents. By default, all requests are taken from this directory, but
              # symbolic links and aliases may be used to point to other locations.
              #
              DocumentRoot "E:\oracle\VIS\inst\apps\VIS_dominion\portal"

              #
              # Each directory to which Apache has access, can be configured with respect
              # to which services and features are allowed and/or disabled in that
              # directory (and its subdirectories).
              #
              # First, we configure the "default" to be a very restrictive set of
              # permissions.
              #
              <Directory />
              Options FollowSymLinks MultiViews
              AllowOverride None
              </Directory>

              #
              # Note that from this point forward you must specifically allow
              # particular features to be enabled - so if something's not working as
              # you might expect, make sure that you have specifically enabled it
              # below.
              #

              #
              # This should be changed to whatever you set DocumentRoot to.
              #
              <Directory "E:\oracle\VIS\inst\apps\VIS_dominion\portal">

              #
              # This may also be "None", "All", or any combination of "Indexes",
              # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
              #
              # Note that "MultiViews" must be named explicitly --- "Options All"
              # doesn't give it to you.
              #
              Options FollowSymLinks MultiViews

              #
              # This controls which options the .htaccess files in directories can
              # override. Can also be "All", or any combination of "Options", "FileInfo",
              # "AuthConfig", and "Limit"
              #
              AllowOverride None

              #
              # Controls who can get stuff from this server.
              #
              Order allow,deny
              Allow from all
              </Directory>

              #
              # UserDir: The name of the directory which is appended onto a user's home
              # directory if a ~user request is received.
              #
              <IfModule mod_userdir.c>
              UserDir public_html
              </IfModule>

              #
              # Control access to UserDir directories. The following is an example
              # for a site where these directories are restricted to read-only.
              #
              #<Directory /home/*/public_html>
              # AllowOverride FileInfo AuthConfig Limit
              # Options MultiViews SymLinksIfOwnerMatch IncludesNoExec
              # <Limit GET POST OPTIONS PROPFIND>
              # Order allow,deny
              # Allow from all
              # </Limit>
              # <LimitExcept GET POST OPTIONS PROPFIND>
              # Order deny,allow
              # Deny from all
              # </LimitExcept>
              #</Directory>

              #
              # DirectoryIndex: Name of the file or files to use as a pre-written HTML
              # directory index. Separate multiple entries with spaces.
              #
              <IfModule mod_dir.c>
              DirectoryIndex index.html
              </IfModule>

              #
              # AccessFileName: The name of the file to look for in each directory
              # for access control information.
              #
              AccessFileName .htaccess

              #
              # The following lines prevent .htaccess files from being viewed by
              # Web clients. Since .htaccess files often contain authorization
              # information, access is disallowed for security reasons. Comment
              # these lines out if you want Web visitors to see the contents of
              # .htaccess files. If you change the AccessFileName directive above,
              # be sure to make the corresponding changes here.
              #
              # Also, folks tend to use names such as .htpasswd for password
              # files, so this will protect those as well.
              #
              <Files ~ "^\.ht">
              Order allow,deny
              Deny from all
              </Files>

              #
              # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
              # document that was negotiated on the basis of content. This asks proxy
              # servers not to cache the document. Uncommenting the following line disables
              # this behavior, and proxies will be allowed to cache the documents.
              #
              #CacheNegotiatedDocs

              #
              # UseCanonicalName: (new for 1.3) With this setting turned on, whenever
              # Apache needs to construct a self-referencing URL (a URL that refers back
              # to the server the response is coming from) it will use ServerName and
              # Port to form a "canonical" name. With this setting off, Apache will
              # use the hostname:port that the client supplied, when possible. This
              # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
              #
              UseCanonicalName On

              #
              # TypesConfig describes where the mime.types file (or equivalent) is
              # to be found.
              #
              <IfModule mod_mime.c>
              TypesConfig E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/conf/mime.types
              </IfModule>

              #
              # DefaultType is the default MIME type the server will use for a document
              # if it cannot otherwise determine one, such as from filename extensions.
              # If your server contains mostly text or HTML documents, "text/plain" is
              # a good value. If most of your content is binary, such as applications
              # or images, you may want to use "application/octet-stream" instead to
              # keep browsers from trying to display binary files as though they are
              # text.
              #
              DefaultType text/plain

              #
              # The mod_mime_magic module allows the server to use various hints from the
              # contents of the file itself to determine its type. The MIMEMagicFile
              # directive tells the module where the hint definitions are located.
              # mod_mime_magic is not part of the default server (you have to add
              # it yourself with a LoadModule [see the DSO paragraph in the 'Global
              # Environment' section], or recompile the server and include mod_mime_magic
              # as part of the configuration), so it's enclosed in an <IfModule> container.
              # This means that the MIMEMagicFile directive will only be processed if the
              # module is part of the server.
              #
              <IfModule mod_mime_magic.c>
              MIMEMagicFile E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/conf/magic
              </IfModule>

              #
              # HostnameLookups: Log the names of clients or just their IP addresses
              # e.g., www.apache.org (on) or 204.62.129.132 (off).
              # The default is off because it'd be overall better for the net if people
              # had to knowingly turn this feature on, since enabling it means that
              # each client request will result in AT LEAST one lookup request to the
              # nameserver.
              #
              HostnameLookups Off

              #
              # ErrorLog: The location of the error log file.
              # If you do not specify an ErrorLog directive within a <VirtualHost>
              # container, error messages relating to that virtual host will be
              # logged here. If you do define an error logfile for a <VirtualHost>
              # container, that host's errors will be logged there and not here.
              #
              ErrorLog "|E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/bin/rotatelogs E:\oracle\VIS\inst\apps\VIS_dominion\logs/ora/10.1.3/Apache/error_log 86400"

              #
              # LogLevel: Control the number of messages logged to the error_log.
              # Possible values include: debug, info, notice, warn, error, crit,
              # alert, emerg.
              #
              LogLevel warn

              #
              # The following directives define some format nicknames for use with
              # a CustomLog directive (see below).
              #
              # Alternate "common" format to use when fronted by webcache:
              #
              # LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
              #
              # When webcache is forwarding requests to OHS, %h becomes the IP of
              # the originating webcache server and the real client IP is stored
              # in the ClientIP header. The common_webcache format can be used
              # in place of the common format when using webcache but with one
              # important caveat: if clients are capable of bypassing webcache
              # then it is possible to spoof the client IP by manually setting
              # the ClientIP header so the %h field should be monitored in such
              # an environment. Another alternative to specifying the ClientIP
              # header directly in a LogFormat is to use the "UseWebCacheIp"
              # directive:
              #
              # UseWebCacheIp On
              #
              # When this is specified, %h is derived internally from the ClientIP
              # header and the access log format does not need to be modified.
              #
              LogFormat "%h %l %u %t \"%r\" %>s %b %T \"%{Referer}i\" \"%{User-Agent}i\"" combined
              LogFormat "%h %l %u %t \"%r\" %>s %b" common
              LogFormat "%{Referer}i -> %U" referer
              LogFormat "%{User-agent}i" agent

              #
              # The location and format of the access logfile (Common Logfile Format).
              # If you do not define any access logfiles within a <VirtualHost>
              # container, they will be logged here. Contrariwise, if you do
              # define per-<VirtualHost> access logfiles, transactions will be
              # logged therein and not in this file.
              #
              CustomLog "|E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/bin/rotatelogs E:\oracle\VIS\inst\apps\VIS_dominion\logs/ora/10.1.3/Apache/access_log 86400" combined

              #
              # If you would like to have agent and referer logfiles, uncomment the
              # following directives.
              #
              #CustomLog E:\oracle\VIS\inst\apps\VIS_dominion\logs/ora/10.1.3/Apache/referer_log referer
              #CustomLog E:\oracle\VIS\inst\apps\VIS_dominion\logs/ora/10.1.3/Apache/agent_log agent

              #
              # If you prefer a single logfile with access, agent, and referer information
              # (Combined Logfile Format) you can use the following directive.
              #
              #CustomLog E:\oracle\VIS\inst\apps\VIS_dominion\logs/ora/10.1.3/Apache/access_log combined

              #
              # Optionally add a line containing the server version and virtual host
              # name to server-generated pages (error documents, FTP directory listings,
              # mod_status and mod_info output etc., but not CGI generated documents).
              # Set to "EMail" to also include a mailto: link to the ServerAdmin.
              # Set to one of: On | Off | EMail
              #
              ServerSignature Off

              #
              # Aliases: Add here as many aliases as you need (with no limit). The format is
              # Alias fakename realname
              #
              <IfModule mod_alias.c>

              #
              # Note that if you include a trailing / on fakename then the server will
              # require it to be present in the URL. So "/icons" isn't aliased in this
              # example, only "/icons/"..
              #
              Alias /icons/ "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/icons/"
              Alias /javacachedocs/ "E:\oracle\VIS\apps\tech_st\10.1.3/javacache/javadoc/"
              <IfModule mod_perl.c>
              Alias /perl/ "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/cgi-bin/"
              </IfModule>

              <Directory "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/icons">
              Options MultiViews
              AllowOverride None
              Order allow,deny
              Allow from all
              </Directory>

              #
              # ScriptAlias: This controls which directories contain server scripts.
              # ScriptAliases are essentially the same as Aliases, except that
              # documents in the realname directory are treated as applications and
              # run by the server when requested rather than as documents sent to the client.
              # The same rules about trailing "/" apply to ScriptAlias directives as to
              # Alias.
              #
              ScriptAlias /cgi-bin/ "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/cgi-bin/"


              #
              # "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/cgi-bin" should be changed to whatever your ScriptAliased
              # CGI directory exists, if you have that configured.
              #
              <Directory "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/cgi-bin">
              AllowOverride None
              Options None
              Order allow,deny
              Allow from all
              </Directory>

              </IfModule>
              # End of aliases.

              #
              # Redirect allows you to tell clients about documents which used to exist in
              # your server's namespace, but do not anymore. This allows you to tell the
              # clients where to look for the relocated document.
              # Format: Redirect old-URI new-URL
              #

              #
              # Directives controlling the display of server-generated directory listings.
              #
              <IfModule mod_autoindex.c>

              #
              # FancyIndexing is whether you want fancy directory indexing or standard
              #
              IndexOptions FancyIndexing

              #
              # AddIcon* directives tell the server which icon to show for different
              # files or filename extensions. These are only displayed for
              # FancyIndexed directories.
              #
              AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

              AddIconByType (TXT,/icons/text.gif) text/*
              AddIconByType (IMG,/icons/image2.gif) image/*
              AddIconByType (SND,/icons/sound2.gif) audio/*
              AddIconByType (VID,/icons/movie.gif) video/*

              AddIcon /icons/binary.gif .bin .exe
              AddIcon /icons/binhex.gif .hqx
              AddIcon /icons/tar.gif .tar
              AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
              AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
              AddIcon /icons/a.gif .ps .ai .eps
              AddIcon /icons/layout.gif .html .shtml .htm .pdf
              AddIcon /icons/text.gif .txt
              AddIcon /icons/c.gif .c
              AddIcon /icons/p.gif .pl .py
              AddIcon /icons/f.gif .for
              AddIcon /icons/dvi.gif .dvi
              AddIcon /icons/uuencoded.gif .uu
              AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
              AddIcon /icons/tex.gif .tex
              AddIcon /icons/bomb.gif core

              AddIcon /icons/back.gif ..
              AddIcon /icons/hand.right.gif README
              AddIcon /icons/folder.gif ^^DIRECTORY^^
              AddIcon /icons/blank.gif ^^BLANKICON^^

              #
              # DefaultIcon is which icon to show for files which do not have an icon
              # explicitly set.
              #
              DefaultIcon /icons/unknown.gif

              #
              # AddDescription allows you to place a short description after a file in
              # server-generated indexes. These are only displayed for FancyIndexed
              # directories.
              # Format: AddDescription "description" filename
              #
              #AddDescription "GZIP compressed document" .gz
              #AddDescription "tar archive" .tar
              #AddDescription "GZIP compressed tar archive" .tgz

              #
              # ReadmeName is the name of the README file the server will look for by
              # default, and append to directory listings.
              #
              # HeaderName is the name of a file which should be prepended to
              # directory indexes.
              #
              # If MultiViews are amongst the Options in effect, the server will
              # first look for name.html and include it if found. If name.html
              # doesn't exist, the server will then look for name.txt and include
              # it as plaintext if found.
              #
              ReadmeName README
              HeaderName HEADER

              #
              # IndexIgnore is a set of filenames which directory indexing should ignore
              # and not include in the listing. Shell-style wildcarding is permitted.
              #
              IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

              </IfModule>
              # End of indexing directives.

              #
              # Document types.
              #
              <IfModule mod_mime.c>

              #
              # AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
              # information on the fly. Note: Not all browsers support this.
              # Despite the name similarity, the following Add* directives have nothing
              # to do with the FancyIndexing customization directives above.
              #
              AddEncoding x-compress Z
              AddEncoding x-gzip gz tgz

              #
              # AddLanguage allows you to specify the language of a document. You can
              # then use content negotiation to give a browser a file in a language
              # it can understand.
              #
              • 19. Re: 500 Internal server error
                708463
                httpd.conf contd.

                # Note 1: The suffix does not have to be the same as the language
                # keyword --- those with documents in Polish (whose net-standard
                # language code is pl) may wish to use "AddLanguage pl .po" to
                # avoid the ambiguity with the common suffix for perl scripts.
                #
                # Note 2: The example entries below illustrate that in quite
                # some cases the two character 'Language' abbriviation is not
                # identical to the two character 'Country' code for its country,
                # E.g. 'Danmark/dk' versus 'Danish/da'.
                #
                # Note 3: In the case of 'ltz' we violate the RFC by using a three char
                # specifier. But there is 'work in progress' to fix this and get
                # the reference data for rfc1766 cleaned up.
                #
                # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
                # French (fr) - German (de) - Greek-Modern (el)
                # Italian (it) - Korean (kr) - Norwegian (no)
                # Portugese (pt) - Luxembourgeois* (ltz)
                # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
                # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
                # Russian (ru)
                #
                AddLanguage ar .ar
                AddLanguage da .dk .da
                AddLanguage nl .nl
                AddLanguage en .en
                AddLanguage et .ee
                AddLanguage fi .fi
                AddLanguage fr .fr
                AddLanguage de .de
                AddLanguage el .el
                AddLanguage es .es_ES .es
                AddLanguage he .he .iw
                AddLanguage hu .hu
                AddCharset ISO-8859-8 .iso8859-8
                AddLanguage it .it
                AddLanguage ja .ja
                AddCharset ISO-2022-JP .jis
                AddLanguage ko .ko
                AddLanguage kr .kr
                AddCharset ISO-2022-KR .iso-kr
                AddLanguage nn .nn
                AddLanguage no .no
                AddLanguage pl .po
                AddCharset ISO-8859-2 .iso-pl
                AddLanguage pt .pt
                AddLanguage pt-br .pt_BR .pt-br
                AddLanguage ltz .lu
                AddLanguage ca .ca
                AddLanguage sk .sk
                AddLanguage sv .sv
                AddLanguage th .th
                AddLanguage tr .tr
                AddLanguage cz .cz .cs
                AddLanguage ro .ro
                AddLanguage ru .ru
                AddLanguage zh-cn .zh_CN
                AddLanguage zh-tw .zh_TW
                AddCharset Big5 .Big5 .big5
                AddCharset WINDOWS-1251 .cp-1251
                AddCharset CP866 .cp866
                AddCharset ISO-8859-5 .iso-ru
                AddCharset KOI8-R .koi8-r
                AddCharset UCS-2 .ucs2
                AddCharset UCS-4 .ucs4
                AddCharset UTF-8 .utf8

                # LanguagePriority allows you to give precedence to some languages
                # in case of a tie during content negotiation.
                #
                # Just list the languages in decreasing order of preference. We have
                # more or less alphabetized them here. You probably want to change this.
                #
                <IfModule mod_negotiation.c>
                LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
                </IfModule>

                #
                # AddType allows you to tweak mime.types without actually editing it, or to
                # make certain files to be certain types.
                #
                # For example, the PHP 3.x module (not part of the Apache distribution - see
                # http://www.php.net) will typically use:
                #
                #AddType application/x-httpd-php3 .php3
                #AddType application/x-httpd-php3-source .phps
                #
                # And for PHP 4.x, use:
                #
                AddType application/x-httpd-php .php .phtml
                AddType application/x-httpd-php-source .phps

                AddType application/x-tar .tgz

                #
                # AddHandler allows you to map certain file extensions to "handlers",
                # actions unrelated to filetype. These can be either built into the server
                # or added with the Action command (see below)
                #
                # If you want to use server side includes, or CGI outside
                # ScriptAliased directories, uncomment the following lines.
                #
                # To use CGI scripts:
                #
                #AddHandler cgi-script .cgi

                #
                # To use server-parsed HTML files
                #
                #AddType text/html .shtml
                #AddHandler server-parsed .shtml

                #
                # Uncomment the following line to enable Apache's send-asis HTTP file
                # feature
                #
                #AddHandler send-as-is asis

                #
                # If you wish to use server-parsed imagemap files, use
                #
                #AddHandler imap-file map

                #
                # To enable type maps, you might want to use
                #
                #AddHandler type-map var

                </IfModule>
                # End of document types.

                #
                # Action lets you define media types that will execute a script whenever
                # a matching file is called. This eliminates the need for repeated URL
                # pathnames for oft-used CGI file processors.
                # Format: Action media/type /cgi-script/location
                # Format: Action handler-name /cgi-script/location
                #

                #
                # MetaDir: specifies the name of the directory in which Apache can find
                # meta information files. These files contain additional HTTP headers
                # to include when sending the document
                #
                #MetaDir .web

                #
                # MetaSuffix: specifies the file name suffix for the file containing the
                # meta information.
                #
                #MetaSuffix .meta

                #
                # Customizable error response (Apache style)
                # these come in three flavors
                #
                # 1) plain text
                #ErrorDocument 500 "The server made a boo boo.
                # n.b. the single leading (") marks it as text, it does not get output
                #
                # 2) local redirects
                #ErrorDocument 404 /missing.html
                # to redirect to local URL /missing.html
                #ErrorDocument 404 /cgi-bin/missing_handler.pl
                # N.B.: You can redirect to a script or a document using server-side-includes.
                #
                # 3) external redirects
                #ErrorDocument 402 http://some.other_server.com/subscription_info.html
                # N.B.: Many of the environment variables associated with the original
                # request will not be available to such a script.

                #
                # Customize behaviour based on the browser
                #
                <IfModule mod_setenvif.c>

                #
                # The following directives modify normal HTTP response behavior.
                # The first directive disables keepalive for Netscape 2.x and browsers that
                # spoof it. There are known problems with these browser implementations.
                # The second directive is for Microsoft Internet Explorer 4.0b2
                # which has a broken HTTP/1.1 implementation and does not properly
                # support keepalive when it is used on 301 or 302 (redirect) responses.
                #
                BrowserMatch "Mozilla/2" nokeepalive
                BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0

                #
                # The following directive disables HTTP/1.1 responses to browsers which
                # are in violation of the HTTP/1.0 spec by not being able to grok a
                # basic 1.1 response.
                #
                BrowserMatch "RealPlayer 4\.0" force-response-1.0
                BrowserMatch "Java/1\.0" force-response-1.0
                BrowserMatch "JDK/1\.0" force-response-1.0

                </IfModule>
                # End of browser customization directives

                #
                # There have been reports of people trying to abuse an old bug from pre-1.1
                # days. This bug involved a CGI script distributed as a part of Apache.
                # By uncommenting these lines you can redirect these attacks to a logging
                # script on phf.apache.org. Or, you can record them yourself, using the script
                # support/phf_abuse_log.cgi.
                #
                #<Location /cgi-bin/phf*>
                # Deny from all
                # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
                #</Location>

                #
                # Proxy Server directives. Uncomment the following lines to
                # enable the proxy server:
                #
                #<IfModule mod_proxy.c>
                # ProxyRequests On

                # <Directory proxy:*>
                # Order deny,allow
                # Deny from all
                # Allow from .your_domain.com
                # </Directory>

                #
                # Enable/disable the handling of HTTP/1.1 "Via:" headers.
                # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
                # Set to one of: Off | On | Full | Block
                #
                # ProxyVia On

                #
                # To enable the cache as well, edit and uncomment the following lines:
                # (no cacheing without CacheRoot)
                #
                # CacheRoot "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/proxy"
                # CacheSize 5
                # CacheGcInterval 4
                # CacheMaxExpire 24
                # CacheLastModifiedFactor 0.1
                # CacheDefaultExpire 1
                # NoCache a_domain.com another_domain.edu joes.garage_sale.com

                #</IfModule>
                # End of proxy directives.

                ### Section 3: Virtual Hosts
                #
                # VirtualHost: If you want to maintain multiple domains/hostnames on your
                # machine you can setup VirtualHost containers for them. Most configurations
                # use only name-based virtual hosts so the server doesn't need to worry about
                # IP addresses. This is indicated by the asterisks in the directives below.
                #
                # Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
                # for further details before you try to setup virtual hosts.
                #
                # You may use the command line option '-S' to verify your virtual host
                # configuration.

                #
                # Use name-based virtual hosting.
                #
                #NameVirtualHost *
                #NameVirtualHost 12.34.56.78:80
                #NameVirtualHost 12.34.56.78

                #
                # VirtualHost example:
                # Almost any Apache directive may go into a VirtualHost container.
                # The first VirtualHost section is used for requests without a known
                # server name.
                #
                #<VirtualHost *>
                # ServerAdmin webmaster@dummy-host.example.com
                # DocumentRoot /www/docs/dummy-host.example.com
                # ServerName dummy-host.example.com
                # ErrorLog logs/dummy-host.example.com-error_log
                # CustomLog logs/dummy-host.example.com-access_log common
                #</VirtualHost>

                #<VirtualHost default:*>
                #</VirtualHost>

                # Required for cgi perl scripts that are run from /cgi-bin/.
                SetEnv PERL5LIB "E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread;E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib;E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread;E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib;E:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl;E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread"

                <IfModule mod_perl.c>
                #
                # Perl Directives
                #
                #     PerlWarn On
                #     PerlFreshRestart On
                #     PerlSetEnv PERL5OPT Tw
                #     PerlSetEnv PERL5LIB "E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib\MSWin32-x86-multi-thread;E:\oracle\VIS\apps\tech_st\10.1.3\perl\5.8.3\lib;E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib\MSWin32-x86-multi-thread;E:\oracle\VIS\apps\tech_st\10.1.3\perl\site\5.8.3\lib;E:\oracle\VIS\apps\apps_st\appl\au\12.0.0\perl;E:\oracle\VIS\apps\tech_st\10.1.3\Apache\Apache\mod_perl\site\5.8.3\lib\MSWin32-x86-multi-thread"
                     PerlModule Apache
                #     PerlModule Apache::Status
                     PerlModule Apache::Registry
                #     PerlModule Apache::CGI
                #     PerlModule Apache::DBI
                #     PerlRequire
                     <Location /perl>
                SetHandler perl-script
                     PerlHandler Apache::Registry
                     AddHandler perl-script .pl
                     Options +ExecCGI
                PerlSendHeader On
                     </Location>

                #     <Location /perl-status>
                # SetHandler perl-script
                # PerlHandler Apache::Status
                # order deny,allow
                # deny from all
                # allow from .your_domain.com
                #     </Location>
                </IfModule>


                #Protect WEB-INF directory

                <DirectoryMatch /WEB-INF/>
                Order deny,allow
                Deny from all
                </DirectoryMatch>


                # Setup of FastCGI module


                <IfModule mod_fastcgi.c>
                Alias /fastcgi/ "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/fastcgi/"
                ScriptAlias /fcgi-bin/ "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/fcgi-bin/"
                <Directory "E:\oracle\VIS\apps\tech_st\10.1.3/Apache/Apache/fcgi-bin">
                AllowOverride None
                Options None
                Order allow,deny
                Allow from all
                SetHandler fastcgi-script
                     <IfModule mod_ossl.c>
                SSLOptions +StdEnvVars
                     </IfModule>
                </Directory>
                </IfModule>

                PassEnv ORACLE_HOME
                PassEnv LD_LIBRARY_PATH
                PassEnv LIBPATH
                PassEnv SHLIB_PATH
                PassEnv NLS_LANG
                PassEnv TNS_ADMIN



                # Include the configuration files needed for mod_oc4j
                include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/mod_oc4j.conf"

                # Include the configuration files needed for mod_dms
                #include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/dms.conf"

                # Loading mod_rewrite module here as it has to load before mod_oc4j
                LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
                # Turn on the rewrite engine
                RewriteEngine ON
                RewriteLog E:\oracle\VIS\inst\apps\VIS_dominion\logs/ora/10.1.3/Apache/mod_rewrite.log
                RewriteLogLevel 0

                # Include the configuration files needed for URL Firewall

                #include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/url_fw.conf"

                # Include the SSL definitions and Virtual Host container
                include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/ssl.conf"

                # Include the configuration files needed for mod_osso
                #include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/mod_osso.conf"

                # Include the Oracle configuration file for custom settings
                include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/oracle_apache.conf"

                # Include the configuration file for mod_security
                include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/security.conf"

                # Include the configuration file for custom configurations
                include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/custom.conf"

                # Include the module and configuration file for ssl terminator configurations
                #LoadModule certheaders_module modules/ApacheModuleCertHeaders.dll
                #include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/ssl_terminator.conf"

                # Include the configuration file for restricted mode
                #include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/restricted_mode_apache.conf"

                # Include the configuration file for trusted nodes
                include "E:\oracle\VIS\inst\apps\VIS_dominion\ora/10.1.3/Apache/Apache/conf/trusted.conf"
                • 20. Re: 500 Internal server error
                  Hussein Sawwan-Oracle
                  Hi,
                  #
                  # LogLevel: Control the number of messages logged to the error_log.
                  # Possible values include: debug, info, notice, warn, error, crit,
                  # alert, emerg.
                  #
                  LogLevel warn
                  Change this to "LogLevel debug" and bounce the services.

                  Regards,
                  Hussein
                  • 21. Re: 500 Internal server error
                    708463
                    Hii,

                    Thank you very much, I am most grateful. Its already working, yesterday i ran autoconfig on dbase and application layer, shut down and start windows and it started working.

                    God bless you really and too much, Amen.
                    • 22. Re: 500 Internal server error
                      693161
                      Tks!

                      Now I can run the script adautocfg.sh.
                      • 23. Re: 500 Internal server error
                        user10741759
                        How do we run the autoconfig on the db and application layer? I am able to run the autoconfig on the application layer. But when I run the autoconfig on the dblayer it asks for the context file name. I have installed r12.1 on windows vista. Everything finished successfull except the last check.

                        JSP

                        -----


                        checking URL = http://ravinder-pc.ravinder.us:8000/OA_HTML/jtfTestCookie.jsp

                        JSP is responding

                        Login Page

                        ------------


                        checking URL = http://ravinder-pc.ravinder.us:8000/OA_HTML/AppsLogin

                        RW-50016: Error: - {0} was not created:
                        File = {1}


                        500 Internal Server Error
                        Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
                        • 24. Re: 500 Internal server error
                          Hussein Sawwan-Oracle
                          Hi,
                          I have installed r12.1 on windows vista.
                          Vista is not a supported OS.

                          Regards,
                          Hussein
                          • 25. Re: 500 Internal server error
                            631368
                            Hi,

                            In my opinion please do the following steps. Although these steps are same as "hsawwan" posted in his first comment :

                            1. Firstly, over power your nervousness.
                            2. Shutdown application services.
                            3. run autoconfig from $ADMIN_SCRIPTS_HOME
                            4. give correct PASSWORD for the user apps, otherwise the apps account will get locked.
                            5. once autoconfig completes successfully (which is must), shutdown the database.
                            6. start the databse.
                            7. start application services. Services must be exited with status 0.
                            8. retest the issue.

                            regards,
                            UNA
                            1 2 Previous Next