ST2540 Drive Tray.xx.Drive.xx lost redundancy, IOM N/A
edited Mar 22, 2013 5:17PM in Disk Storage 2000, 3000, 6000 RAID Arrays & JBODs (MOSC) 4 commentsAnswered
Hi All,
We have a hard disk failure Tray.00.Drive09. The hot spare automatically took over for that failed disk successfully, so then we have performed to replace this failed disk. But after following up the disk replacement procedure in Service Advisor completed successfully, the action copy back from hot spare to the new disk is in progressing, the array has raised a critical warning that this new disk has lost redundancy. I have already checked stateCaptureData.dmp and see that only this new drive is seen with single path and all the other drives in the same tray have both paths available. So
We have a hard disk failure Tray.00.Drive09. The hot spare automatically took over for that failed disk successfully, so then we have performed to replace this failed disk. But after following up the disk replacement procedure in Service Advisor completed successfully, the action copy back from hot spare to the new disk is in progressing, the array has raised a critical warning that this new disk has lost redundancy. I have already checked stateCaptureData.dmp and see that only this new drive is seen with single path and all the other drives in the same tray have both paths available. So
0