Warehouse Management Business Intelligence
Discussion List
-
object storage Configuration to send Inventory Balance snapshot in CSVSummary: We need to send on hand inventory data using inventory balance snapshot by location or EPR bucket to Amazon S3, what all detailes are needed and what will the s…AKASH BAHETY 25 views 1 comment 0 points Most recent by Beth Crepeau- Support - Oracle-Oracle Warehouse Management -
Item unit cost not available at item facility.In OWMS, the unit cost are currently configured at the global item master level. This means the same unit cost is applied uniformly across all facilities. However, the c…Aniket Kadam-235775 21 views 4 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management -
Multifield Barcode not workingSummary: We have LPN barcodes with prefix 1D provided by manufacturer. How we can remove prefix while LPN scan. Current mfb setup: 1 = prefix D= field identifier Content…
-
Is there any api to update OBLPN route number?Is there any api to update OBLPN route number?
-
Issue in Repack ModuleThere is no explicit, direct parameter or configuration within the standard "Repack OBLPN" module that immediately surfaced in the documentation to prevent repacking an …
-
How to Handle Shipping and Receiving in WMS for OSP with Non-Transactable Service ItemsSummary: I’m working on an Outside Processing (OSP) scenario in Oracle Fusion, and I need some guidance on how to handle Shipping and Receiving activities in Oracle WMS …Shubham _Kumar1994 23 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Unable to understand Round Up One UOM flag vs (Round Up One UOM flag+Last Permanent Location Flag).Summary: When the Round Up one UOM flag is combined with the Ignore Capacity for Last Permanent Location Flag, the required need is replenished to the destination locati…
-
How to add validation to disable consolidation of orders in WMS if ship to address is differentSummary: In WMS, is there any configuration that we can enable to ensure orders with difference ship to address cannot be allowed to consolidate into a single shipment. …
-
Consolidated Pick Slip Report Auto PrintingSummary: The business currently uses a custom field at the order header level (ORDER_HDR_CUST_SHORT_TEXT_11) to capture a Grouping ID. This allows multiple orders to be …Prachi N. 23 views 1 comment 0 points Most recent by SOMA NARESH-Support-Oracle Warehouse Management -
cycle countWe want to understand the following error message that appears when we perform a cycle count and approve it once the cycle count is complete. "No se puede aprobar el reg…
-
Can PO Sequence number be decimal?If a PO line number contains a decimal value (e.g., 10.34), WMS cannot support it. I am storing this decimal value in a custom field (PO_DTL_CUST_FIELD1). However, the A…
-
Is there any way to map sales order number and internal replen order (REPL-ORD-AR-XX-XX)?Is there any way to map sales order number and internal replen order (REPL-ORD-AR-XX-XX) which is performed through movement request based replenishment?
-
Issue in Purchase Order Update through REST APISummary: Suppose one Purchase Order is having two lines, one line is in receiving and another line is in created status, so overall order is partially allocated. Custome…PARAMARTHA BARIK 42 views 7 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
In which OBLPN status Reconcile order status and oblpn job works?It's not working when oblpn is in packing statusPARAMARTHA BARIK 14 views 5 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
What is this field on the item pack_tolerance_percent screen for?Summary: Content (please ensure you mask any confidential information): Version (include the version you are using, if applicable): Code Snippet (add any code snippets t…PARAMARTHA BARIK 21 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Is there a way to see all eligible search parameters for a deeplink?Hi Oracle Support, Is there a value I can pass in the URL for a deep link which will show me the eligible parameter which I can use to filter the data set? As an example…
-
BICC: Can we Extract Data from WMS Cloud 24D?Summary: I came across Creating a Business Intelligence Cloud Extract 25A Document and want to extract data from my WMS Cloud 24D. But need some clarity on it if someone…
-
Need to develop full fletch Dashboard within WMSSummary: We would like to build a dashboard report using WMS data in Oracle WMS (cloud) 23B.07a. Content (required): We have checked web gen reports available functional…salman aslam 22 views 3 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Partially Received PO Shows all Lines In ReceivingPartially Received PO Shows all Lines In Receiving This line is not going to Recvd status. Activity Performed: 1. first order was for 200 qty. 2. Then we recvd 100. 3. A…PARAMARTHA BARIK 23 views 4 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Ability to get visibility of Unit of Measure in Inventory HistorySummary: Our business is currently has an ask to have a visibility of unit of measure in inventory history screen. How can we achieve this, what are different ways? Cont…Suyog Dhongade 11 views 1 comment 0 points Most recent by Sudarsan Royam-Support-Oracle Warehouse Management
-
What methods are available to print custom Web Gen 2 Reports?Summary: Other than scheduling and printing manually through UI, what methods are available to print custom Web Gen 2 Reports? For example, can a custom report be printe…J. McCracken 23 views 5 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
When updating an existing item in WMS getting error Unable to update Item Struct for Item : = 29694Summary: When update the Item in WMS Item Master using Template or using API we are getting this error "Unable to update Item Struct for Item : = 29694" what is the reas…Suyog Dhongade 11 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Creating list of values ( look up codes ) on cust fields or elsewhereSummary: We have a requirement on various screens, one of them is in IB SHIPMENT ( ASN ) screen. We want users to capture the type of shipment they are receiving when th…M.Nouman Shaikh 4 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Waving IssueWe need to allocate an order that has an attribute a with no value. While performing the allocation, we want to select LPN inventory with the attribute a not equal to 'C…PARAMARTHA BARIK 11 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Is it possible to print distinct values as comma delimited string in Oracle WMS Web Reports?Summary: Is there a way to print distinct values in a comma delimited string in WMS Web reports? Example 1: There are three rows in Order details The values for cust_sho…K Sai Susheel Kumar 22 views 1 comment 0 points Most recent by Sudarsan Royam-Support-Oracle Warehouse Management
-
Are there any possibilities to extend the password expiration date in WMS beyond 365 days?Summary: Hi folks , Are there any possibilities to extend the password expiration date in WMS beyond 365 days for a user? Currently, when a password expires, we are requ…Bharath Mariappan 21 views 2 comments 0 points Most recent by Sudarsan Royam-Support-Oracle Warehouse Management -
Output Interface Message sent when ORder is in shipped statusSummary: We have an Order, the has 3 OBLPN's linked to that Order. we use the Outbound Shipping Info interface to send to the ERP as each OBLPN is Shipped. we however wa…ScottyHam 11 views 1 comment 0 points Most recent by Fabio Buitrago-Support-Oracle Warehouse Management
-
Is there anyway to pick with any sequence while doing pack oblpn? (Not auto-substitute)Summary: Content (please ensure you mask any confidential information): Is there anyway to pick with any sequence while doing pack oblpn? Also users want to avoid the co…
-
Receiving error while trying to update inventory Attributes of LPN:Receiving error while trying to update inventory Attributes of LPN: 1. I have created multiple movement requests to move Full LPNs from one warehouse floor to Another Fl…
-
What are different ways to load On Hand Balances for Active inventory in Oracle WMS CloudSummary: We have 2 systems Oracle Fusion and Oracle WMS Cloud, where currently we have an integration for Inventory Adjustments going from WMS to Fusion. for our Prod we…Suyog Dhongade 32 views 2 comments 0 points Most recent by Fabio Buitrago-Support-Oracle Warehouse Management