SL48 robot - Unable to sense robotic device (202)
Hello Community,
I am having an on going problem with a tape robot (SL48) and NetBackup. NetBackup can not talk to the robot although backups continue running to the mounted tapes. Sun has (over time) replaced all parts except the tape drives. The SL48 firmware has been updated as well.
I see the following messages on /var/adm/mesages.
Nov 9 07:24:03 beaker fp: [ID 517869 kern.info] NOTICE: fp(1): PLOGI to 21000 failed state=Timeout, reason=Hardware Error
Nov 9 07:24:03 beaker fctl: [ID 517869 kern.warning] WARNING: fp(1)::PLOGI to 21000 failed. state=c reason=1.
Nov 9 07:24:03 beaker scsi: [ID 243001 kern.warning] WARNING: /pci@3,0/pci1022,7458@a/pci1077,140@1/fp@0,0 (fcp1):
I am having an on going problem with a tape robot (SL48) and NetBackup. NetBackup can not talk to the robot although backups continue running to the mounted tapes. Sun has (over time) replaced all parts except the tape drives. The SL48 firmware has been updated as well.
I see the following messages on /var/adm/mesages.
Nov 9 07:24:03 beaker fp: [ID 517869 kern.info] NOTICE: fp(1): PLOGI to 21000 failed state=Timeout, reason=Hardware Error
Nov 9 07:24:03 beaker fctl: [ID 517869 kern.warning] WARNING: fp(1)::PLOGI to 21000 failed. state=c reason=1.
Nov 9 07:24:03 beaker scsi: [ID 243001 kern.warning] WARNING: /pci@3,0/pci1022,7458@a/pci1077,140@1/fp@0,0 (fcp1):
0